view tests/test-convert-svn-move.t @ 38737:913ca175c4ae

aggressivemergedelta: document rename and move to `revlog` section

The config does not follow our naming guideline and "Aggressive" is probably a
word to keep away from users.

The option does not truly fit in the `format` section. It can be turned on and
off for existing repository without much consequence regarding compatibility.

A new `revlog` option is created to control behavior related to revlog writing
and reading. We can see multiple other config options that could be migrated
there.

* format.maxchainlen
* experimental.mmapindexthreshold
* experimental.sparse-read.density-threshold (in an updated form)
* experimental.sparse-read.min-gap-size (in an updated form)

In addition, we can foresee at least a couple of sparse-revlog related option
coming too (to reduce delta chain length and increase snapshot reuse)

These two extra options might fit there too. Unless we want to create a
section dedicated to caches and performance.

* format.chunkcachesize
* format.manifestcachesize

For now, we only migrate `optimize-delta-parent-choice` since it is getting
out of experimental. It is too close to the release to move the other one. In
addition, we still lack proper the prioritization of alias that would help
renaming them without bad consequence for users.

(Not fully happy about the `revlog` name but could not find better).

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/move.svndump"
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif

Convert trunk and branches

  $ hg convert --datesort "$SVNREPOURL"/subproject A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  13 createtrunk
  12 moved1
  11 moved1
  10 moved2
  9 changeb and rm d2
  8 changeb and rm d2
  7 moved1again
  6 moved1again
  5 copyfilefrompast
  4 copydirfrompast
  3 add d3
  2 copy dir and remove subdir
  1 add d4old
  0 rename d4old into d4new

  $ cd A-hg
  $ hg log -G --template '{rev} {desc|firstline} files: {files}\n'
  o  13 rename d4old into d4new files: d4new/g d4old/g
  |
  o  12 add d4old files: d4old/g
  |
  o  11 copy dir and remove subdir files: d3/d31/e d4/d31/e d4/f
  |
  o  10 add d3 files: d3/d31/e d3/f
  |
  o  9 copydirfrompast files: d2/d
  |
  o  8 copyfilefrompast files: d
  |
  o  7 moved1again files: d1/b d1/c
  |
  | o  6 moved1again files:
  | |
  o |  5 changeb and rm d2 files: d1/b d2/d
  | |
  | o  4 changeb and rm d2 files: b
  | |
  o |  3 moved2 files: d2/d
  | |
  o |  2 moved1 files: d1/b d1/c
  | |
  | o  1 moved1 files: b c
  |
  o  0 createtrunk files:
  

Check move copy records

  $ hg st --rev 12:13 --copies
  A d4new/g
    d4old/g
  R d4old/g

Check branches

  $ hg branches
  default                       13:* (glob)
  d1                             6:* (glob)
  $ cd ..

  $ mkdir test-replace
  $ cd test-replace
  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/replace.svndump"

Convert files being replaced by directories

  $ hg convert svn-repo hg-repo
  initializing destination hg-repo repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd hg-repo

Manifest before

  $ hg -v manifest -r 1
  644   a
  644   d/b
  644   d2/a
  644 @ dlink
  644 @ dlink2
  644   dlink3

Manifest after clobber1

  $ hg -v manifest -r 2
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644   dlink3

Manifest after clobber2

  $ hg -v manifest -r 3
  644   a/b
  644   d/b
  644   d2/a
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Manifest after clobberdir

  $ hg -v manifest -r 6
  644   a/b
  644   d/b
  644   d2/a
  644   d2/c
  644   dlink/b
  644 @ dlink2
  644 @ dlink3

Try updating

  $ hg up -qC default
  $ cd ..

Test convert progress bar

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > assume-tty = 1
  > delay = 0
  > changedelay = 0
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg convert svn-repo hg-progress
  \r (no-eol) (esc)
  scanning [=====>                                      ] 1/7\r (no-eol) (esc)
  scanning [===========>                                ] 2/7\r (no-eol) (esc)
  scanning [=================>                          ] 3/7\r (no-eol) (esc)
  scanning [========================>                   ] 4/7\r (no-eol) (esc)
  scanning [==============================>             ] 5/7\r (no-eol) (esc)
  scanning [====================================>       ] 6/7\r (no-eol) (esc)
  scanning [===========================================>] 7/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/7\r (no-eol) (esc)
  getting files [=====>                                 ] 1/6\r (no-eol) (esc)
  getting files [============>                          ] 2/6\r (no-eol) (esc)
  getting files [==================>                    ] 3/6\r (no-eol) (esc)
  getting files [=========================>             ] 4/6\r (no-eol) (esc)
  getting files [===============================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=====>                                    ] 1/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========>                              ] 2/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/2\r (no-eol) (esc)
  scanning paths [==================>                   ] 1/2\r (no-eol) (esc)
  getting files [========>                              ] 1/4\r (no-eol) (esc)
  getting files [==================>                    ] 2/4\r (no-eol) (esc)
  getting files [============================>          ] 3/4\r (no-eol) (esc)
  getting files [======================================>] 4/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 3/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=======================>                  ] 4/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============================>            ] 5/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/1\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===================================>      ] 6/7\r (no-eol) (esc)
  scanning paths [                                      ] 0/3\r (no-eol) (esc)
  scanning paths [===========>                          ] 1/3\r (no-eol) (esc)
  scanning paths [========================>             ] 2/3\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination hg-progress repository
  scanning source...
  sorting...
  converting...
  6 initial
  5 clobber symlink
  4 clobber1
  3 clobber2
  2 adddb
  1 clobberdir
  0 branch

  $ cd ..