view tests/test-rebase-pull.t @ 38737:913ca175c4ae

aggressivemergedelta: document rename and move to `revlog` section

The config does not follow our naming guideline and "Aggressive" is probably a
word to keep away from users.

The option does not truly fit in the `format` section. It can be turned on and
off for existing repository without much consequence regarding compatibility.

A new `revlog` option is created to control behavior related to revlog writing
and reading. We can see multiple other config options that could be migrated
there.

* format.maxchainlen
* experimental.mmapindexthreshold
* experimental.sparse-read.density-threshold (in an updated form)
* experimental.sparse-read.min-gap-size (in an updated form)

In addition, we can foresee at least a couple of sparse-revlog related option
coming too (to reduce delta chain length and increase snapshot reuse)

These two extra options might fit there too. Unless we want to create a
section dedicated to caches and performance.

* format.chunkcachesize
* format.manifestcachesize

For now, we only migrate `optimize-delta-parent-choice` since it is getting
out of experimental. It is too close to the release to move the other one. In
addition, we still lack proper the prioritization of alias that would help
renaming them without bad consequence for users.

(Not fully happy about the `revlog` name but could not find better).

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > histedit=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: {node|short} '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 77ae9631bcca
  rebasing 2:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg

  $ hg tglog
  @  3: d80cc2da061e 'L1'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

Abort pull early if working dir is not clean:

  $ echo L1-mod > L1
  $ hg pull --rebase
  abort: uncommitted changes
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early if another operation (histedit) is in progress:

  $ hg histedit . -q --commands - << EOF
  > edit d80cc2da061e histedit: generate unfinished state
  > EOF
  Editing (d80cc2da061e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  [1]
  $ hg pull --rebase
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ hg histedit --abort --quiet

Abort pull early with pending uncommitted merge:

  $ cd ..
  $ hg clone --noupdate c d
  $ cd d
  $ hg tglog
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ hg update --quiet 0
  $ echo M1 > M1
  $ hg commit --quiet -Am M1
  $ hg update --quiet 1
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg pull --rebase
  abort: outstanding uncommitted merge
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early with unclean subrepo:
  $ echo s = s > .hgsub
  $ hg add .hgsub
  $ hg init s
  $ hg commit -m "generated a subrepo"
  $ echo a > s/a
  $ hg -R s add s/a
  $ hg pull --rebase
  abort: uncommitted changes in subrepository "s"
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]

Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 77ae9631bcca
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 77ae9631bcca 'R1'
  |
  ~

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 77ae9631bcca 'R1'
  |
  ~

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 77ae9631bcca 'R1'
  |
  @  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 31cd3a05214e:770a61882ace
  rebasing 3:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg
  $ hg tglog
  @  5: 518d153c0ba3 'L1'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
pull --rebase works with bundle2 turned on

  $ cd ../a
  $ echo R4 > R4
  $ hg ci -Am R4
  adding R4
  $ hg tglog
  @  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 00e3b7781125
  rebasing 5:518d153c0ba3 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-rebase.hg
  $ hg tglog
  @  6: 0d0727eb7ce0 'L1'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase only update if there is nothing to rebase

  $ cd ../a
  $ echo R5 > R5
  $ hg ci -Am R5
  adding R5
  $ hg tglog
  @  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ echo L2 > L2
  $ hg ci -Am L2
  adding L2
  $ hg up 'desc(L1)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 88dd24261747
  rebasing 6:0d0727eb7ce0 "L1"
  rebasing 7:c1f58876e3bf "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-rebase.hg
  $ hg tglog
  o  8: 6dc0ea5dcf55 'L2'
  |
  @  7: 864e0a2d2614 'L1'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase update (no rebase) use proper update:

- warn about other head.

  $ cd ../a
  $ echo R6 > R6
  $ hg ci -Am R6
  adding R6
  $ cd ../c
  $ hg up 'desc(R5)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 65bc164c1d9b
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "65bc164c1d9b: R6"
  1 other heads for branch "default"
  $ hg tglog
  @  9: 65bc164c1d9b 'R6'
  |
  | o  8: 6dc0ea5dcf55 'L2'
  | |
  | o  7: 864e0a2d2614 'L1'
  |/
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

Multiple pre-existing heads on the branch
-----------------------------------------

Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.

  $ cd ../a
  $ hg branch unrelatedbranch
  marked working directory as branch unrelatedbranch
  (branches are permanent and global, did you want a bookmark?)
  $ echo B1 > B1
  $ hg commit -Am B1
  adding B1
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 39c381359968
  nothing to rebase

There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.

  $ hg up 'desc(R6)'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo M1 > M1
  $ hg commit -Am M1
  adding M1
  $ cd ../a
  $ hg up 'desc(R6)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo R7 > R7
  $ hg commit -Am R7
  adding R7
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets f7d3e42052f9
  rebasing 7:864e0a2d2614 "L1"
  rebasing 8:6dc0ea5dcf55 "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-rebase.hg
  $ hg tglog
  @  12: 3603a865eea0 'L2'
  |
  o  11: bcc8a9cd04bf 'L1'
  |
  o  10: f7d3e42052f9 'R7'
  |
  | o  9: 41fab4eef82f 'M1'
  |/
  | o  8: 39c381359968 'B1' unrelatedbranch
  |/
  o  7: 65bc164c1d9b 'R6'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'