Mercurial > hg
view tests/test-treediscovery.t @ 20508:91d4f82c2d3b
run-tests: add possibility for test-runners to report a "warned" test result
A test result is recognized as "warned" when the test runner returns the exit
code False. (False is similar to 0, which is reporting a command has run
sucessfully.)
The only difference in display is that the failure message while running writes
"Warning:" instead of "ERROR:". The diff output is the same as when the test
fails. Runing "run-tests.py -i" asks to accept the changed result also for
tests reported as "warned".
When running tests, a "warned" test would look like this:
..
--- xxxx\tests\test-something.t
+++ xxxx\tests\test-something.t.err
@@ -1279,7 +1279,7 @@
$ echo anything
$ hg commit -S -m whatever
committing subrepository s
- committing subrepository s/sbs
+ committing subrepository s/sbs (glob)
warning: something happened
committing subrepository t
$ echo something
Warning: xxxx\tests\test-sOMETHING.t output changed
~.s...s...s..
Reporting a test result as "warned" will be used in following patches.
author | Simon Heimberg <simohe@besonet.ch> |
---|---|
date | Thu, 13 Feb 2014 08:26:13 +0100 |
parents | 00f2d29308db |
children | 0e2877f8605d |
line wrap: on
line source
$ "$TESTDIR/hghave" killdaemons || exit 80 Tests discovery against servers without getbundle support: $ CAP=getbundle $ . "$TESTDIR/notcapable" $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > "$TESTDIR/killdaemons.py" $DAEMON_PIDS > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 check if process of pid looks reasonable ('hg' normally, 'python' for run-tests.py -l) #if windows ps of mingw does not support -p, tasklist is on any windows machine since XP $ tasklist //NH //fi "pid eq `cat hg.pid`" | grep ' ' (.* )?(hg|python)\.exe( .*)? (re) #else $ ps --no-heading -p `cat hg.pid` (.* )?(hg|python)( .*)? (re) #endif $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Remote is empty: $ tstop ; tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is superset: $ tstop $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Partial pull: $ tstop ; tstart main $ hg clone $remote partial --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg pull $remote --rev name1 pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ cd .. Both have new stuff in new named branches: $ tstop $ hg clone main repo1a --rev name1 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev name2 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop ; tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 70314b29987d: r5 name2 3 6c6f5d5f3c11: r6 name2 4 b6b4d315a2ac: r7 name2 5 d8f638ac69e9: r8 name2 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 3 changesets with 6 changes to 2 files (+1 heads) (run 'hg heads' to see heads) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 4 changesets with 8 changes to 2 files (+1 heads) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Both have new stuff in existing named branches: $ tstop $ rm -r repo1a repo1b repo2a repo2b $ hg clone main repo1a --rev 3 --rev 8 -q $ hg clone repo1a repo1b -q $ hg clone main repo2a --rev 4 --rev 7 -q $ hg clone repo2a repo2b -q $ tstart repo1a $ cd repo2a $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop ; tstart repo1b $ cd repo2b $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 8 d8f638ac69e9: r8 name2 $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 4 e71dbbc70e03: r4 name1 $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 2 changes to 2 files (run 'hg update' to get a working copy) $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 2 changes to 2 files $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop