Mercurial > hg
view tests/test-diff-ignore-whitespace.t @ 29830:92ac2baaea86
revlog: use an LRU cache for delta chain bases
Profiling using statprof revealed a hotspot during changegroup
application calculating delta chain bases on generaldelta repos.
Essentially, revlog._addrevision() was performing a lot of redundant
work tracing the delta chain as part of determining when the chain
distance was acceptable. This was most pronounced when adding
revisions to manifests, which can have delta chains thousands of
revisions long.
There was a delta chain base cache on revlogs before, but it only
captured a single revision. This was acceptable before generaldelta,
when _addrevision would build deltas from the previous revision and
thus we'd pretty much guarantee a cache hit when resolving the delta
chain base on a subsequent _addrevision call. However, it isn't
suitable for generaldelta because parent revisions aren't necessarily
the last processed revision.
This patch converts the delta chain base cache to an LRU dict cache.
The cache can hold multiple entries, so generaldelta repos have a
higher chance of getting a cache hit.
The impact of this change when processing changegroup additions is
significant. On a generaldelta conversion of the "mozilla-unified"
repo (which contains heads of the main Firefox repositories in
chronological order - this means there are lots of transitions between
heads in revlog order), this change has the following impact when
performing an `hg unbundle` of an uncompressed bundle of the repo:
before: 5:42 CPU time
after: 4:34 CPU time
Most of this time is saved when applying the changelog and manifest
revlogs:
before: 2:30 CPU time
after: 1:17 CPU time
That nearly a 50% reduction in CPU time applying changesets and
manifests!
Applying a gzipped bundle of the same repo (effectively simulating a
`hg clone` over HTTP) showed a similar speedup:
before: 5:53 CPU time
after: 4:46 CPU time
Wall time improvements were basically the same as CPU time.
I didn't measure explicitly, but it feels like most of the time
is saved when processing manifests. This makes sense, as large
manifests tend to have very long delta chains and thus benefit the
most from this cache.
So, this change effectively makes changegroup application (which is
used by `hg unbundle`, `hg clone`, `hg pull`, `hg unshelve`, and
various other commands) significantly faster when delta chains are
long (which can happen on repos with large numbers of files and thus
large manifests).
In theory, this change can result in more memory utilization. However,
we're caching a dict of ints. At most we have 200 ints + Python object
overhead per revlog. And, the cache is really only populated when
performing read-heavy operations, such as adding changegroups or
scanning an individual revlog. For memory bloat to be an issue, we'd
need to scan/read several revisions from several revlogs all while
having active references to several revlogs. I don't think there are
many operations that do this, so I don't think memory bloat from the
cache will be an issue.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 22 Aug 2016 21:48:50 -0700 |
parents | 405b6bd015df |
children | da07367d683b |
line wrap: on
line source
GNU diff is the reference for all of these results. Prepare tests: $ echo '[alias]' >> $HGRCPATH $ echo 'ndiff = diff --nodates' >> $HGRCPATH $ hg init $ printf 'hello world\ngoodbye world\n' >foo $ hg ci -Amfoo -ufoo adding foo Test added blank lines: $ printf '\nhello world\n\ngoodbye world\n\n' >foo >>> two diffs showing three added lines <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ + hello world + goodbye world + $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ + hello world + goodbye world + >>> no diffs <<< $ hg ndiff -B $ hg ndiff -Bb Test added horizontal space first on a line(): $ printf '\t hello world\ngoodbye world\n' >foo >>> four diffs showing added space first on the first line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world + hello world goodbye world Test added horizontal space last on a line: $ printf 'hello world\t \ngoodbye world\n' >foo >>> two diffs showing space appended to the first line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +hello world goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +hello world goodbye world >>> no diffs <<< $ hg ndiff -b $ hg ndiff -Bb Test added horizontal space in the middle of a word: $ printf 'hello world\ngood bye world\n' >foo >>> four diffs showing space inserted into "goodbye" <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +good bye world Test increased horizontal whitespace amount: $ printf 'hello world\ngoodbye\t\t \tworld\n' >foo >>> two diffs showing changed whitespace amount in the last line <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ hello world -goodbye world +goodbye world >>> no diffs <<< $ hg ndiff -b $ hg ndiff -Bb Test added blank line with horizontal whitespace: $ printf 'hello world\n \t\ngoodbye world\n' >foo >>> three diffs showing added blank line with horizontal space <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world >>> no diffs <<< $ hg ndiff -Bb Test added blank line with other whitespace: $ printf 'hello world\n \t\ngoodbye world \n' >foo >>> three diffs showing added blank line with other space <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world + +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world + +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world + goodbye world >>> no diffs <<< $ hg ndiff -Bb Test whitespace changes: $ printf 'helloworld\ngoodbye\tworld \n' >foo >>> four diffs showing changed whitespace <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world -goodbye world +helloworld +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world -goodbye world +helloworld +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +helloworld goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,2 @@ -hello world +helloworld goodbye world >>> no diffs <<< $ hg ndiff -w Test whitespace changes and blank lines: $ printf 'helloworld\n\n\n\ngoodbye\tworld \n' >foo >>> five diffs showing changed whitespace <<< $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world -goodbye world +helloworld + + + +goodbye world $ hg ndiff -B diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world -goodbye world +helloworld + + + +goodbye world $ hg ndiff -b diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world +helloworld + + + goodbye world $ hg ndiff -Bb diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ -hello world +helloworld + + + goodbye world $ hg ndiff -w diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,5 @@ hello world + + + goodbye world >>> no diffs <<< $ hg ndiff -wB Test \r (carriage return) as used in "DOS" line endings: $ printf 'hello world\r\n\r\ngoodbye\rworld\n' >foo $ hg ndiff diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world\r (esc) +\r (esc) +goodbye\r (no-eol) (esc) world No completely blank lines to ignore: $ hg ndiff --ignore-blank-lines diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world -goodbye world +hello world\r (esc) +\r (esc) +goodbye\r (no-eol) (esc) world Only new line noticed: $ hg ndiff --ignore-space-change diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world +\r (esc) goodbye world $ hg ndiff --ignore-all-space diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ hello world +\r (esc) goodbye world New line not noticed when space change ignored: $ hg ndiff --ignore-blank-lines --ignore-all-space Do not ignore all newlines, only blank lines $ printf 'hello \nworld\ngoodbye world\n' > foo $ hg ndiff --ignore-blank-lines diff -r 540c40a65b78 foo --- a/foo +++ b/foo @@ -1,2 +1,3 @@ -hello world +hello +world goodbye world Test hunk offsets adjustments with --ignore-blank-lines $ hg revert -aC reverting foo $ printf '\nb\nx\nd\n' > a $ printf 'b\ny\nd\n' > b $ hg add a b $ hg ci -m add $ hg cat -r . a > b $ hg cat -r . b > a $ hg diff -B --nodates a > ../diffa $ cat ../diffa diff -r 0e66aa54f318 a --- a/a +++ b/a @@ -1,4 +1,4 @@ b -x +y d $ hg diff -B --nodates b > ../diffb $ cat ../diffb diff -r 0e66aa54f318 b --- a/b +++ b/b @@ -1,3 +1,3 @@ b -y +x d $ hg revert -aC reverting a reverting b $ hg import --no-commit ../diffa applying ../diffa $ hg revert -aC reverting a $ hg import --no-commit ../diffb applying ../diffb $ hg revert -aC reverting b