view tests/test-http.t @ 29021:92d37fb3f1aa stable

verify: don't init subrepo when missing one is referenced (issue5128) (API)

Initializing a subrepo when one doesn't exist is the right thing to do when the
parent is being updated, but in few other cases.  Unfortunately, there isn't
enough context in the subrepo module to distinguish this case.  This same issue
can be caused with other subrepo aware commands, so there is a general issue
here beyond the scope of this fix.

A simpler attempt I tried was to add an '_updating' boolean to localrepo, and
set/clear it around the call to mergemod.update() in hg.updaterepo().  That
mostly worked, but doesn't handle the case where archive will clone the subrepo
if it is missing.  (I vaguely recall that there may be other commands that will
clone if needed like this, but certainly not all do.  It seems both handy, and a
bit surprising for what should be a read only operation.  It might be nice if
all commands did this consistently, but we probably need Angel's subrepo caching
first, to not make a mess of the working directory.)

I originally handled 'Exception' in order to pick up the Aborts raised in
subrepo.state(), but this turns out to be unnecessary because that is called
once and cached by ctx.sub() when iterating the subrepos.

It was suggested in the bug discussion to skip looking at the subrepo links
unless -S is specified.  I don't really like that idea because missing a subrepo
or (less likely, but worse) a corrupt .hgsubstate is a problem of the parent
repo when checking out a revision.  The -S option seems like a better fit for
functionality that would recurse into each subrepo and do a full verification.

Ultimately, the default value for 'allowcreate' should probably be flipped, but
since the default behavior was to allow creation, this is less risky for now.

#require serve

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
  $ echo foo>foo.d/foo
  $ echo bar>foo.d/bAr.hg.d/BaR
  $ echo bar>foo.d/baR.d.hg/bAR
  $ hg commit -A -m 1
  adding foo
  adding foo.d/bAr.hg.d/BaR
  adding foo.d/baR.d.hg/bAR
  adding foo.d/foo
  $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
  $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid

Test server address cannot be reused

#if windows
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': * (glob)
  [255]
#else
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': Address already in use
  [255]
#endif
  $ cd ..
  $ cat hg1.pid hg2.pid >> $DAEMON_PIDS

clone via stream

  $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
  streaming all changes
  6 files to transfer, 606 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions

try to clone via stream, should use pull instead

  $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

clone via pull

  $ hg clone http://localhost:$HGPORT1/ copy-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy-pull
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions
  $ cd test
  $ echo bar > bar
  $ hg commit -A -d '1 0' -m 2
  adding bar
  $ cd ..

clone over http with --update

  $ hg clone http://localhost:$HGPORT1/ updated --update 0
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 5 changes to 5 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg log -r . -R updated
  changeset:   0:8b6053c928fe
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  
  $ rm -rf updated

incoming via HTTP

  $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ touch LOCAL
  $ hg ci -qAm LOCAL
  $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
  comparing with http://localhost:$HGPORT1/
  searching for changes
  2
  $ cd ..

pull

  $ cd copy-pull
  $ echo '[hooks]' >> .hg/hgrc
  $ echo "changegroup = printenv.py changegroup" >> .hg/hgrc
  $ hg pull
  pulling from http://localhost:$HGPORT1/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=http://localhost:$HGPORT1/ (glob)
  (run 'hg update' to get a working copy)
  $ cd ..

clone from invalid URL

  $ hg clone http://localhost:$HGPORT/bad
  abort: HTTP Error 404: Not Found
  [255]

test http authentication
+ use the same server to test server side streaming preference

  $ cd test
  $ cat << EOT > userpass.py
  > import base64
  > from mercurial.hgweb import common
  > def perform_authentication(hgweb, req, op):
  >     auth = req.env.get('HTTP_AUTHORIZATION')
  >     if not auth:
  >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
  >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
  >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
  >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
  > def extsetup():
  >     common.permhooks.insert(0, perform_authentication)
  > EOT
  $ hg serve --config extensions.x=userpass.py -p $HGPORT2 -d --pid-file=pid \
  >    --config server.preferuncompressed=True \
  >    --config web.push_ssl=False --config web.allow_push=* -A ../access.log
  $ cat pid >> $DAEMON_PIDS

  $ cat << EOF > get_pass.py
  > import getpass
  > def newgetpass(arg):
  >   return "pass"
  > getpass.getpass = newgetpass
  > EOF

  $ hg id http://localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id http://localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/
  http authorization required for http://localhost:$HGPORT2/
  realm: mercurial
  user: user
  password: 5fed3813f7f5
  $ hg id http://user:pass@localhost:$HGPORT2/
  5fed3813f7f5
  $ echo '[auth]' >> .hg/hgrc
  $ echo 'l.schemes=http' >> .hg/hgrc
  $ echo 'l.prefix=lo' >> .hg/hgrc
  $ echo 'l.username=user' >> .hg/hgrc
  $ echo 'l.password=pass' >> .hg/hgrc
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://user@localhost:$HGPORT2/
  5fed3813f7f5
  $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
  streaming all changes
  7 files to transfer, 916 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
--pull should override server's preferuncompressed
  $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 5 changes to 5 files
  updating to branch default
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg id http://user2@localhost:$HGPORT2/
  abort: http authorization required for http://localhost:$HGPORT2/
  [255]
  $ hg id http://user:pass2@localhost:$HGPORT2/
  abort: HTTP Error 403: no
  [255]

  $ hg -R dest tag -r tip top
  $ hg -R dest push http://user:pass@localhost:$HGPORT2/
  pushing to http://user:***@localhost:$HGPORT2/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ hg rollback -q

  $ cut -c38- ../access.log
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=stream_out HTTP/1.1" 401 -
  "GET /?cmd=stream_out HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d
  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D
  "GET /?cmd=getbundle HTTP/1.1" 401 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks
  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872
  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365* (glob)
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases

  $ cd ..

clone of serve with repo in root and unserved subrepo (issue2970)

  $ hg --cwd test init sub
  $ echo empty > test/sub/empty
  $ hg --cwd test/sub add empty
  $ hg --cwd test/sub commit -qm 'add empty'
  $ hg --cwd test/sub tag -r 0 something
  $ echo sub = sub > test/.hgsub
  $ hg --cwd test add .hgsub
  $ hg --cwd test commit -qm 'add subrepo'
  $ hg clone http://localhost:$HGPORT noslash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]
  $ hg clone http://localhost:$HGPORT/ slash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]

check error log

  $ cat error.log