view tests/test-mq-eol.t @ 29021:92d37fb3f1aa stable

verify: don't init subrepo when missing one is referenced (issue5128) (API)

Initializing a subrepo when one doesn't exist is the right thing to do when the
parent is being updated, but in few other cases.  Unfortunately, there isn't
enough context in the subrepo module to distinguish this case.  This same issue
can be caused with other subrepo aware commands, so there is a general issue
here beyond the scope of this fix.

A simpler attempt I tried was to add an '_updating' boolean to localrepo, and
set/clear it around the call to mergemod.update() in hg.updaterepo().  That
mostly worked, but doesn't handle the case where archive will clone the subrepo
if it is missing.  (I vaguely recall that there may be other commands that will
clone if needed like this, but certainly not all do.  It seems both handy, and a
bit surprising for what should be a read only operation.  It might be nice if
all commands did this consistently, but we probably need Angel's subrepo caching
first, to not make a mess of the working directory.)

I originally handled 'Exception' in order to pick up the Aborts raised in
subrepo.state(), but this turns out to be unnecessary because that is called
once and cached by ctx.sub() when iterating the subrepos.

It was suggested in the bug discussion to skip looking at the subrepo links
unless -S is specified.  I don't really like that idea because missing a subrepo
or (less likely, but worse) a corrupt .hgsubstate is a problem of the parent
repo when checking out a revision.  The -S option seems like a better fit for
functionality that would recurse into each subrepo and do a full verification.

Ultimately, the default value for 'allowcreate' should probably be flipped, but
since the default behavior was to allow creation, this is less risky for now.

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = file('eol.diff', 'wb')
  > w = f.write
  > w('test message\n')
  > w('diff --git a/a b/a\n')
  > w('--- a/a\n')
  > w('+++ b/a\n')
  > w('@@ -1,5 +1,5 @@\n')
  > w(' a\n')
  > w('-b\r\n')
  > w('+y\r\n')
  > w(' c\r\n')
  > w(' d\n')
  > w('-e\n')
  > w('\ No newline at end of file\n')
  > w('+z\r\n')
  > w('\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in file(sys.argv[1], 'rb'):
  >     line = line.replace('\r', '<CR>')
  >     line = line.replace('\n', '<LF>')
  >     print line
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ $PYTHON -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ python ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ python ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ $PYTHON -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ $PYTHON -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..