Mercurial > hg
view tests/test-mq-guards.t @ 29021:92d37fb3f1aa stable
verify: don't init subrepo when missing one is referenced (issue5128) (API)
Initializing a subrepo when one doesn't exist is the right thing to do when the
parent is being updated, but in few other cases. Unfortunately, there isn't
enough context in the subrepo module to distinguish this case. This same issue
can be caused with other subrepo aware commands, so there is a general issue
here beyond the scope of this fix.
A simpler attempt I tried was to add an '_updating' boolean to localrepo, and
set/clear it around the call to mergemod.update() in hg.updaterepo(). That
mostly worked, but doesn't handle the case where archive will clone the subrepo
if it is missing. (I vaguely recall that there may be other commands that will
clone if needed like this, but certainly not all do. It seems both handy, and a
bit surprising for what should be a read only operation. It might be nice if
all commands did this consistently, but we probably need Angel's subrepo caching
first, to not make a mess of the working directory.)
I originally handled 'Exception' in order to pick up the Aborts raised in
subrepo.state(), but this turns out to be unnecessary because that is called
once and cached by ctx.sub() when iterating the subrepos.
It was suggested in the bug discussion to skip looking at the subrepo links
unless -S is specified. I don't really like that idea because missing a subrepo
or (less likely, but worse) a corrupt .hgsubstate is a problem of the parent
repo when checking out a revision. The -S option seems like a better fit for
functionality that would recurse into each subrepo and do a full verification.
Ultimately, the default value for 'allowcreate' should probably be flipped, but
since the default behavior was to allow creation, this is less risky for now.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Wed, 27 Apr 2016 22:45:52 -0400 |
parents | a387b0390082 |
children | 55c6ebd11cb9 |
line wrap: on
line source
$ echo "[extensions]" >> $HGRCPATH $ echo "mq=" >> $HGRCPATH $ hg init $ hg qinit $ echo x > x $ hg ci -Ama adding x $ hg qnew a.patch $ echo a > a $ hg add a $ hg qrefresh $ hg qnew b.patch $ echo b > b $ hg add b $ hg qrefresh $ hg qnew c.patch $ echo c > c $ hg add c $ hg qrefresh $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty should fail $ hg qguard does-not-exist.patch +bleh abort: no patch named does-not-exist.patch [255] should fail $ hg qguard +fail abort: no patches applied [255] $ hg qpush applying a.patch now at: a.patch should guard a.patch $ hg qguard +a should print +a $ hg qguard a.patch: +a $ hg qpop popping a.patch patch queue now empty should fail $ hg qpush a.patch cannot push 'a.patch' - guarded by '+a' [1] $ hg qguard a.patch a.patch: +a should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop popping b.patch patch queue now empty test selection of an empty guard $ hg qselect "" abort: guard cannot be an empty string [255] $ hg qselect a number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch $ hg qpush applying a.patch now at: a.patch $ hg qguard -- c.patch -a should print -a $ hg qguard c.patch c.patch: -a should skip c.patch $ hg qpush -a applying b.patch skipping c.patch - guarded by '-a' now at: b.patch $ hg qnext all patches applied [1] should display b.patch $ hg qtop b.patch $ hg qguard -n c.patch should push c.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty $ hg qselect -n guards deactivated number of unguarded, unapplied patches has changed from 3 to 2 should push all $ hg qpush -a applying b.patch applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qguard a.patch +1 $ hg qguard b.patch +2 $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 should push a.patch, not b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping a.patch patch queue now empty $ hg qselect 2 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qprev b.patch Used to be an issue with holes in the patch sequence So, put one hole on the base and ask for topmost patch. $ hg qtop c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qselect 1 2 number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch, b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop -a popping b.patch popping a.patch patch queue now empty $ hg qguard -- a.patch +1 +2 -3 $ hg qselect 1 2 3 number of unguarded, unapplied patches has changed from 3 to 2 list patches and guards $ hg qguard -l a.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded have at least one patch applied to test coloring $ hg qpush applying b.patch now at: b.patch list patches and guards with color $ hg --config extensions.color= qguard --config color.mode=ansi \ > -l --color=always \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc) \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc) \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc) should pop b.patch $ hg qpop popping b.patch patch queue now empty list series $ hg qseries -v 0 G a.patch 1 U b.patch 2 U c.patch list guards $ hg qselect 1 2 3 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qselect -n --reapply -v guards deactivated popping guarded patches popping c.patch popping b.patch patch queue now empty reapplying unguarded patches skipping a.patch - guarded by '+1' '+2' skipping b.patch - guarded by '+2' skipping a.patch - guarded by '+1' '+2' skipping b.patch - guarded by '+2' applying c.patch patching file c adding c committing files: c committing manifest committing changelog now at: c.patch guards in series file: +1 +2 -3 $ hg qselect -s +1 +2 -3 should show c.patch $ hg qapplied c.patch $ hg qrename a.patch new.patch should show : new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qnew d.patch $ hg qpop popping d.patch now at: c.patch should show new.patch and b.patch as Guarded, c.patch as Applied and d.patch as Unapplied $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 U d.patch qseries again, but with color $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always 0 G \x1b[0;30;1mnew.patch\x1b[0m (esc) 1 G \x1b[0;30;1mb.patch\x1b[0m (esc) 2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc) 3 U \x1b[0;30;1md.patch\x1b[0m (esc) $ hg qguard d.patch +2 new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded. $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 G d.patch $ qappunappv() > { > for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do > echo % hg $command > hg $command > done > } $ hg qpop -a popping c.patch patch queue now empty $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded d.patch: +2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied c.patch % hg qunapplied -v 0 G new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied new.patch c.patch % hg qunapplied -v 0 U new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qpush -a applying new.patch skipping b.patch - guarded by '+2' applying c.patch skipping d.patch - guarded by '+2' now at: c.patch $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 G b.patch 2 A c.patch % hg qunapplied % hg qunapplied -v 3 G d.patch $ hg qselect 2 number of unguarded, unapplied patches has changed from 0 to 1 $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 U b.patch 2 A c.patch % hg qunapplied d.patch % hg qunapplied -v 3 U d.patch $ for patch in `hg qseries`; do > echo % hg qapplied $patch > hg qapplied $patch > echo % hg qunapplied $patch > hg qunapplied $patch > done % hg qapplied new.patch new.patch % hg qunapplied new.patch b.patch d.patch % hg qapplied b.patch new.patch % hg qunapplied b.patch d.patch % hg qapplied c.patch new.patch c.patch % hg qunapplied c.patch d.patch % hg qapplied d.patch new.patch c.patch % hg qunapplied d.patch hg qseries -m: only b.patch should be shown the guards file was not ignored in the past $ hg qdelete -k b.patch $ hg qseries -m b.patch hg qseries -m with color $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always \x1b[0;31;1mb.patch\x1b[0m (esc) excercise corner cases in "qselect --reapply" $ hg qpop -a popping c.patch popping new.patch patch queue now empty $ hg qguard -- new.patch -not-new $ hg qguard -- c.patch -not-c $ hg qguard -- d.patch -not-d $ hg qpush -a applying new.patch applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qguard -l new.patch: -not-new c.patch: -not-c d.patch: -not-d $ hg qselect --reapply not-d popping guarded patches popping d.patch now at: c.patch reapplying unguarded patches cannot push 'd.patch' - guarded by '-not-d' $ hg qser -v 0 A new.patch 1 A c.patch 2 G d.patch $ hg qselect --reapply -n guards deactivated $ hg qpush applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 A c.patch 2 A d.patch $ hg qselect --reapply not-c popping guarded patches popping d.patch popping c.patch now at: new.patch reapplying unguarded patches applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 G c.patch 2 A d.patch $ hg qselect --reapply not-new popping guarded patches popping d.patch popping new.patch patch queue now empty reapplying unguarded patches applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 G new.patch 1 A c.patch 2 A d.patch test that qselect shows "number of guarded, applied patches" correctly $ hg qimport -q -e b.patch adding b.patch to series file $ hg qguard -- b.patch -not-b $ hg qpop -a -q patch queue now empty $ hg qunapplied -v 0 G new.patch 1 U c.patch 2 U d.patch 3 U b.patch $ hg qselect not-new not-c number of unguarded, unapplied patches has changed from 3 to 2 $ hg qpush -q -a patch d.patch is empty now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 A d.patch 3 A b.patch $ hg qselect --none guards deactivated $ hg qselect not-new not-c not-d number of guarded, applied patches has changed from 0 to 1 test that "qselect --reapply" reapplies patches successfully when the already applied patch becomes unguarded and it follows the already guarded (= not yet applied) one. $ hg qpop -q -a patch queue now empty $ hg qselect not-new not-c number of unguarded, unapplied patches has changed from 1 to 2 $ hg qpush -q -a patch d.patch is empty now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 A d.patch 3 A b.patch $ hg qselect -q --reapply not-c not-b now at: d.patch cannot push 'b.patch' - guarded by '-not-b' $ hg qseries -v 0 U new.patch 1 G c.patch 2 A d.patch 3 G b.patch test that "qselect --reapply" checks applied patches correctly when no applied patches becomes guarded but some of unapplied ones become unguarded. $ hg qpop -q -a patch queue now empty $ hg qselect not-new not-c not-d number of unguarded, unapplied patches has changed from 2 to 1 $ hg qpush -q -a now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 G d.patch 3 A b.patch $ hg qselect -q --reapply not-new not-c $ hg qseries -v 0 G new.patch 1 G c.patch 2 U d.patch 3 A b.patch