Mercurial > hg
view mercurial/copies.py @ 52285:94cf83d9a2c9
sslutil: drop support for Python prior to 3.7
There's also a block of code around line 47 related to `ssl.HAS_TLSv1` to
determine the supported protocols that references "Python 3.7", but I'm not
altering that because the commit referenced there wasn't landed until just prior
to the 3.9 release, and I'm not sure what flavors of py38 might not have a
backport.
Avoid de-indenting for now for a clearer text diff.
| author | Matt Harbison <matt_harbison@yahoo.com> |
|---|---|
| date | Fri, 08 Nov 2024 19:48:06 -0500 |
| parents | f4733654f144 |
| children |
line wrap: on
line source
# coding: utf8 # copies.py - copy detection for Mercurial # # Copyright 2008 Olivia Mackall <olivia@selenic.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import annotations import collections import os from .i18n import _ from .node import nullrev from . import ( match as matchmod, pathutil, policy, util, ) from .utils import stringutil from .revlogutils import ( flagutil, sidedata as sidedatamod, ) rustmod = policy.importrust("copy_tracing") def _filter(src, dst, t): """filters out invalid copies after chaining""" # When _chain()'ing copies in 'a' (from 'src' via some other commit 'mid') # with copies in 'b' (from 'mid' to 'dst'), we can get the different cases # in the following table (not including trivial cases). For example, case 6 # is where a file existed in 'src' and remained under that name in 'mid' and # then was renamed between 'mid' and 'dst'. # # case src mid dst result # 1 x y - - # 2 x y y x->y # 3 x y x - # 4 x y z x->z # 5 - x y - # 6 x x y x->y # # _chain() takes care of chaining the copies in 'a' and 'b', but it # cannot tell the difference between cases 1 and 2, between 3 and 4, or # between 5 and 6, so it includes all cases in its result. # Cases 1, 3, and 5 are then removed by _filter(). for k, v in list(t.items()): if k == v: # case 3 del t[k] elif v not in src: # case 5 # remove copies from files that didn't exist del t[k] elif k not in dst: # case 1 # remove copies to files that were then removed del t[k] def _chain(prefix, suffix): """chain two sets of copies 'prefix' and 'suffix'""" result = prefix.copy() for key, value in suffix.items(): result[key] = prefix.get(value, value) return result def _tracefile(fctx, am, basemf): """return file context that is the ancestor of fctx present in ancestor manifest am Note: we used to try and stop after a given limit, however checking if that limit is reached turned out to be very expensive. we are better off disabling that feature.""" for f in fctx.ancestors(): path = f.path() if am.get(path, None) == f.filenode(): return path if basemf and basemf.get(path, None) == f.filenode(): return path def _dirstatecopies(repo, match=None): ds = repo.dirstate c = ds.copies().copy() for k in list(c): if not ds.get_entry(k).tracked or (match and not match(k)): del c[k] return c def _computeforwardmissing(a, b, match=None): """Computes which files are in b but not a. This is its own function so extensions can easily wrap this call to see what files _forwardcopies is about to process. """ ma = a.manifest() mb = b.manifest() return mb.filesnotin(ma, match=match) def usechangesetcentricalgo(repo): """Checks if we should use changeset-centric copy algorithms""" if repo.filecopiesmode == b'changeset-sidedata': return True readfrom = repo.ui.config(b'experimental', b'copies.read-from') changesetsource = (b'changeset-only', b'compatibility') return readfrom in changesetsource def _committedforwardcopies(a, b, base, match): """Like _forwardcopies(), but b.rev() cannot be None (working copy)""" # files might have to be traced back to the fctx parent of the last # one-side-only changeset, but not further back than that repo = a._repo if usechangesetcentricalgo(repo): return _changesetforwardcopies(a, b, match) debug = repo.ui.debugflag and repo.ui.configbool(b'devel', b'debug.copies') dbg = repo.ui.debug if debug: dbg(b'debug.copies: looking into rename from %s to %s\n' % (a, b)) am = a.manifest() basemf = None if base is None else base.manifest() # find where new files came from # we currently don't try to find where old files went, too expensive # this means we can miss a case like 'hg rm b; hg cp a b' cm = {} # Computing the forward missing is quite expensive on large manifests, since # it compares the entire manifests. We can optimize it in the common use # case of computing what copies are in a commit versus its parent (like # during a rebase or histedit). Note, we exclude merge commits from this # optimization, since the ctx.files() for a merge commit is not correct for # this comparison. forwardmissingmatch = match if b.p1() == a and b.p2().rev() == nullrev: filesmatcher = matchmod.exact(b.files()) forwardmissingmatch = matchmod.intersectmatchers(match, filesmatcher) if repo.ui.configbool(b'devel', b'copy-tracing.trace-all-files'): missing = list(b.walk(match)) # _computeforwardmissing(a, b, match=forwardmissingmatch) if debug: dbg(b'debug.copies: searching all files: %d\n' % len(missing)) else: missing = _computeforwardmissing(a, b, match=forwardmissingmatch) if debug: dbg( b'debug.copies: missing files to search: %d\n' % len(missing) ) ancestrycontext = a._repo.changelog.ancestors([b.rev()], inclusive=True) for f in sorted(missing): if debug: dbg(b'debug.copies: tracing file: %s\n' % f) fctx = b[f] fctx._ancestrycontext = ancestrycontext if debug: start = util.timer() opath = _tracefile(fctx, am, basemf) if opath: if debug: dbg(b'debug.copies: rename of: %s\n' % opath) cm[f] = opath if debug: dbg( b'debug.copies: time: %f seconds\n' % (util.timer() - start) ) return cm def _revinfo_getter(repo, match): """returns a function that returns the following data given a <rev>" * p1: revision number of first parent * p2: revision number of first parent * changes: a ChangingFiles object """ cl = repo.changelog parents = cl.parentrevs flags = cl.flags HASCOPIESINFO = flagutil.REVIDX_HASCOPIESINFO changelogrevision = cl.changelogrevision if rustmod is not None: def revinfo(rev): p1, p2 = parents(rev) if flags(rev) & HASCOPIESINFO: raw = changelogrevision(rev)._sidedata.get(sidedatamod.SD_FILES) else: raw = None return (p1, p2, raw) else: def revinfo(rev): p1, p2 = parents(rev) if flags(rev) & HASCOPIESINFO: changes = changelogrevision(rev).changes else: changes = None return (p1, p2, changes) return revinfo def cached_is_ancestor(is_ancestor): """return a cached version of is_ancestor""" cache = {} def _is_ancestor(anc, desc): if anc > desc: return False elif anc == desc: return True key = (anc, desc) ret = cache.get(key) if ret is None: ret = cache[key] = is_ancestor(anc, desc) return ret return _is_ancestor def _changesetforwardcopies(a, b, match): if a.rev() in (nullrev, b.rev()): return {} repo = a.repo().unfiltered() cl = repo.changelog isancestor = cl.isancestorrev # To track rename from "A" to B, we need to gather all parent → children # edges that are contains in `::B` but not in `::A`. # # # To do so, we need to gather all revisions exclusive¹ to "B" (ie¹: `::b - # ::a`) and also all the "roots point", ie the parents of the exclusive set # that belong to ::a. These are exactly all the revisions needed to express # the parent → children we need to combine. # # [1] actually, we need to gather all the edges within `(::a)::b`, ie: # excluding paths that leads to roots that are not ancestors of `a`. We # keep this out of the explanation because it is hard enough without this special case.. parents = cl._uncheckedparentrevs graph_roots = (nullrev, nullrev) ancestors = cl.ancestors([a.rev()], inclusive=True) revs = cl.findmissingrevs(common=[a.rev()], heads=[b.rev()]) roots = set() has_graph_roots = False multi_thread = repo.ui.configbool(b'devel', b'copy-tracing.multi-thread') # iterate over `only(B, A)` for r in revs: ps = parents(r) if ps == graph_roots: has_graph_roots = True else: p1, p2 = ps # find all the "root points" (see larger comment above) if p1 != nullrev and p1 in ancestors: roots.add(p1) if p2 != nullrev and p2 in ancestors: roots.add(p2) if not roots: # no common revision to track copies from return {} if has_graph_roots: # this deal with the special case mentioned in the [1] footnotes. We # must filter out revisions that leads to non-common graphroots. roots = list(roots) m = min(roots) h = [b.rev()] roots_to_head = cl.reachableroots(m, h, roots, includepath=True) roots_to_head = set(roots_to_head) revs = [r for r in revs if r in roots_to_head] if repo.filecopiesmode == b'changeset-sidedata': # When using side-data, we will process the edges "from" the children. # We iterate over the children, gathering previous collected data for # the parents. Do know when the parents data is no longer necessary, we # keep a counter of how many children each revision has. # # An interesting property of `children_count` is that it only contains # revision that will be relevant for a edge of the graph. So if a # children has parent not in `children_count`, that edges should not be # processed. children_count = dict((r, 0) for r in roots) for r in revs: for p in cl.parentrevs(r): if p == nullrev: continue children_count[r] = 0 if p in children_count: children_count[p] += 1 revinfo = _revinfo_getter(repo, match) with repo.changelog.reading(): return _combine_changeset_copies( revs, children_count, b.rev(), revinfo, match, isancestor, multi_thread, ) else: # When not using side-data, we will process the edges "from" the parent. # so we need a full mapping of the parent -> children relation. children = dict((r, []) for r in roots) for r in revs: for p in cl.parentrevs(r): if p == nullrev: continue children[r] = [] if p in children: children[p].append(r) x = revs.pop() assert x == b.rev() revs.extend(roots) revs.sort() revinfo = _revinfo_getter_extra(repo) return _combine_changeset_copies_extra( revs, children, b.rev(), revinfo, match, isancestor ) def _combine_changeset_copies( revs, children_count, targetrev, revinfo, match, isancestor, multi_thread ): """combine the copies information for each item of iterrevs revs: sorted iterable of revision to visit children_count: a {parent: <number-of-relevant-children>} mapping. targetrev: the final copies destination revision (not in iterrevs) revinfo(rev): a function that return (p1, p2, p1copies, p2copies, removed) match: a matcher It returns the aggregated copies information for `targetrev`. """ alwaysmatch = match.always() if rustmod is not None: final_copies = rustmod.combine_changeset_copies( list(revs), children_count, targetrev, revinfo, multi_thread ) else: isancestor = cached_is_ancestor(isancestor) all_copies = {} # iterate over all the "children" side of copy tracing "edge" for current_rev in revs: p1, p2, changes = revinfo(current_rev) current_copies = None # iterate over all parents to chain the existing data with the # data from the parent → child edge. for parent, parent_rev in ((1, p1), (2, p2)): if parent_rev == nullrev: continue remaining_children = children_count.get(parent_rev) if remaining_children is None: continue remaining_children -= 1 children_count[parent_rev] = remaining_children if remaining_children: copies = all_copies.get(parent_rev, None) else: copies = all_copies.pop(parent_rev, None) if copies is None: # this is a root newcopies = copies = {} elif remaining_children: newcopies = copies.copy() else: newcopies = copies # chain the data in the edge with the existing data if changes is not None: childcopies = {} if parent == 1: childcopies = changes.copied_from_p1 elif parent == 2: childcopies = changes.copied_from_p2 if childcopies: newcopies = copies.copy() for dest, source in childcopies.items(): prev = copies.get(source) if prev is not None and prev[1] is not None: source = prev[1] newcopies[dest] = (current_rev, source) assert newcopies is not copies if changes.removed: for f in changes.removed: if f in newcopies: if newcopies is copies: # copy on write to avoid affecting potential other # branches. when there are no other branches, this # could be avoided. newcopies = copies.copy() newcopies[f] = (current_rev, None) # check potential need to combine the data from another parent (for # that child). See comment below for details. if current_copies is None: current_copies = newcopies else: # we are the second parent to work on c, we need to merge our # work with the other. # # In case of conflict, parent 1 take precedence over parent 2. # This is an arbitrary choice made anew when implementing # changeset based copies. It was made without regards with # potential filelog related behavior. assert parent == 2 current_copies = _merge_copies_dict( newcopies, current_copies, isancestor, changes, current_rev, ) all_copies[current_rev] = current_copies # filter out internal details and return a {dest: source mapping} final_copies = {} targetrev_items = all_copies[targetrev] assert targetrev_items is not None # help pytype for dest, (tt, source) in targetrev_items.items(): if source is not None: final_copies[dest] = source if not alwaysmatch: for filename in list(final_copies.keys()): if not match(filename): del final_copies[filename] return final_copies # constant to decide which side to pick with _merge_copies_dict PICK_MINOR = 0 PICK_MAJOR = 1 PICK_EITHER = 2 def _merge_copies_dict(minor, major, isancestor, changes, current_merge): """merge two copies-mapping together, minor and major In case of conflict, value from "major" will be picked. - `isancestors(low_rev, high_rev)`: callable return True if `low_rev` is an ancestors of `high_rev`, - `ismerged(path)`: callable return True if `path` have been merged in the current revision, return the resulting dict (in practice, the "minor" object, updated) """ for dest, value in major.items(): other = minor.get(dest) if other is None: minor[dest] = value else: pick, overwrite = _compare_values( changes, isancestor, dest, other, value ) if overwrite: if pick == PICK_MAJOR: minor[dest] = (current_merge, value[1]) else: minor[dest] = (current_merge, other[1]) elif pick == PICK_MAJOR: minor[dest] = value return minor def _compare_values(changes, isancestor, dest, minor, major): """compare two value within a _merge_copies_dict loop iteration return (pick, overwrite). - pick is one of PICK_MINOR, PICK_MAJOR or PICK_EITHER - overwrite is True if pick is a return of an ambiguity that needs resolution. """ major_tt, major_value = major minor_tt, minor_value = minor if major_tt == minor_tt: # if it comes from the same revision it must be the same value assert major_value == minor_value return PICK_EITHER, False elif ( changes is not None and minor_value is not None and major_value is None and dest in changes.salvaged ): # In this case, a deletion was reverted, the "alive" value overwrite # the deleted one. return PICK_MINOR, True elif ( changes is not None and major_value is not None and minor_value is None and dest in changes.salvaged ): # In this case, a deletion was reverted, the "alive" value overwrite # the deleted one. return PICK_MAJOR, True elif isancestor(minor_tt, major_tt): if changes is not None and dest in changes.merged: # change to dest happened on the branch without copy-source change, # so both source are valid and "major" wins. return PICK_MAJOR, True else: return PICK_MAJOR, False elif isancestor(major_tt, minor_tt): if changes is not None and dest in changes.merged: # change to dest happened on the branch without copy-source change, # so both source are valid and "major" wins. return PICK_MAJOR, True else: return PICK_MINOR, False elif minor_value is None: # in case of conflict, the "alive" side wins. return PICK_MAJOR, True elif major_value is None: # in case of conflict, the "alive" side wins. return PICK_MINOR, True else: # in case of conflict where both side are alive, major wins. return PICK_MAJOR, True def _revinfo_getter_extra(repo): """return a function that return multiple data given a <rev>"i * p1: revision number of first parent * p2: revision number of first parent * p1copies: mapping of copies from p1 * p2copies: mapping of copies from p2 * removed: a list of removed files * ismerged: a callback to know if file was merged in that revision """ cl = repo.changelog parents = cl.parentrevs def get_ismerged(rev): ctx = repo[rev] def ismerged(path): if path not in ctx.files(): return False fctx = ctx[path] parents = fctx._filelog.parents(fctx._filenode) nb_parents = 0 for n in parents: if n != repo.nullid: nb_parents += 1 return nb_parents >= 2 return ismerged def revinfo(rev): p1, p2 = parents(rev) ctx = repo[rev] p1copies, p2copies = ctx._copies removed = ctx.filesremoved() return p1, p2, p1copies, p2copies, removed, get_ismerged(rev) return revinfo def _combine_changeset_copies_extra( revs, children, targetrev, revinfo, match, isancestor ): """version of `_combine_changeset_copies` that works with the Google specific "extra" based storage for copy information""" all_copies = {} alwaysmatch = match.always() for r in revs: copies = all_copies.pop(r, None) if copies is None: # this is a root copies = {} for i, c in enumerate(children[r]): p1, p2, p1copies, p2copies, removed, ismerged = revinfo(c) if r == p1: parent = 1 childcopies = p1copies else: assert r == p2 parent = 2 childcopies = p2copies if not alwaysmatch: childcopies = { dst: src for dst, src in childcopies.items() if match(dst) } newcopies = copies if childcopies: newcopies = copies.copy() for dest, source in childcopies.items(): prev = copies.get(source) if prev is not None and prev[1] is not None: source = prev[1] newcopies[dest] = (c, source) assert newcopies is not copies for f in removed: if f in newcopies: if newcopies is copies: # copy on write to avoid affecting potential other # branches. when there are no other branches, this # could be avoided. newcopies = copies.copy() newcopies[f] = (c, None) othercopies = all_copies.get(c) if othercopies is None: all_copies[c] = newcopies else: # we are the second parent to work on c, we need to merge our # work with the other. # # In case of conflict, parent 1 take precedence over parent 2. # This is an arbitrary choice made anew when implementing # changeset based copies. It was made without regards with # potential filelog related behavior. if parent == 1: _merge_copies_dict_extra( othercopies, newcopies, isancestor, ismerged ) else: _merge_copies_dict_extra( newcopies, othercopies, isancestor, ismerged ) all_copies[c] = newcopies final_copies = {} for dest, (tt, source) in all_copies[targetrev].items(): if source is not None: final_copies[dest] = source return final_copies def _merge_copies_dict_extra(minor, major, isancestor, ismerged): """version of `_merge_copies_dict` that works with the Google specific "extra" based storage for copy information""" for dest, value in major.items(): other = minor.get(dest) if other is None: minor[dest] = value else: new_tt = value[0] other_tt = other[0] if value[1] == other[1]: continue # content from "major" wins, unless it is older # than the branch point or there is a merge if ( new_tt == other_tt or not isancestor(new_tt, other_tt) or ismerged(dest) ): minor[dest] = value def _forwardcopies(a, b, base=None, match=None): """find {dst@b: src@a} copy mapping where a is an ancestor of b""" if base is None: base = a match = a.repo().narrowmatch(match) # check for working copy if b.rev() is None: cm = _committedforwardcopies(a, b.p1(), base, match) # combine copies from dirstate if necessary copies = _chain(cm, _dirstatecopies(b._repo, match)) else: copies = _committedforwardcopies(a, b, base, match) return copies def _backwardrenames(a, b, match): """find renames from a to b""" if a._repo.ui.config(b'experimental', b'copytrace') == b'off': return {} # We don't want to pass in "match" here, since that would filter # the destination by it. Since we're reversing the copies, we want # to filter the source instead. copies = _forwardcopies(b, a) return _reverse_renames(copies, a, match) def _reverse_renames(copies, dst, match): """given copies to context 'dst', finds renames from that context""" # Even though we're not taking copies into account, 1:n rename situations # can still exist (e.g. hg cp a b; hg mv a c). In those cases we # arbitrarily pick one of the renames. r = {} for k, v in sorted(copies.items()): if match and not match(v): continue # remove copies if v in dst: continue r[v] = k return r def pathcopies(x, y, match=None): """find {dst@y: src@x} copy mapping for directed compare""" repo = x._repo debug = repo.ui.debugflag and repo.ui.configbool(b'devel', b'debug.copies') if debug: repo.ui.debug( b'debug.copies: searching copies from %s to %s\n' % (x, y) ) if x == y or not x or not y: return {} if y.rev() is None and x == y.p1(): if debug: repo.ui.debug(b'debug.copies: search mode: dirstate\n') # short-circuit to avoid issues with merge states return _dirstatecopies(repo, match) a = y.ancestor(x) if a == x: if debug: repo.ui.debug(b'debug.copies: search mode: forward\n') copies = _forwardcopies(x, y, match=match) elif a == y: if debug: repo.ui.debug(b'debug.copies: search mode: backward\n') copies = _backwardrenames(x, y, match=match) else: if debug: repo.ui.debug(b'debug.copies: search mode: combined\n') base = None if a.rev() != nullrev: base = x x_copies = _forwardcopies(a, x) y_copies = _forwardcopies(a, y, base, match=match) same_keys = set(x_copies) & set(y_copies) for k in same_keys: if x_copies.get(k) == y_copies.get(k): del x_copies[k] del y_copies[k] x_backward_renames = _reverse_renames(x_copies, x, match) copies = _chain( x_backward_renames, y_copies, ) _filter(x, y, copies) return copies def mergecopies(repo, c1, c2, base): """ Finds moves and copies between context c1 and c2 that are relevant for merging. 'base' will be used as the merge base. Copytracing is used in commands like rebase, merge, unshelve, etc to merge files that were moved/ copied in one merge parent and modified in another. For example: o ---> 4 another commit | | o ---> 3 commit that modifies a.txt | / o / ---> 2 commit that moves a.txt to b.txt |/ o ---> 1 merge base If we try to rebase revision 3 on revision 4, since there is no a.txt in revision 4, and if user have copytrace disabled, we prints the following message: ```other changed <file> which local deleted``` Returns a tuple where: "branch_copies" an instance of branch_copies. "diverge" is a mapping of source name -> list of destination names for divergent renames. This function calls different copytracing algorithms based on config. """ # avoid silly behavior for update from empty dir if not c1 or not c2 or c1 == c2: return branch_copies(), branch_copies(), {} narrowmatch = c1.repo().narrowmatch() # avoid silly behavior for parent -> working dir if c2.node() is None and c1.node() == repo.dirstate.p1(): return ( branch_copies(_dirstatecopies(repo, narrowmatch)), branch_copies(), {}, ) copytracing = repo.ui.config(b'experimental', b'copytrace') if stringutil.parsebool(copytracing) is False: # stringutil.parsebool() returns None when it is unable to parse the # value, so we should rely on making sure copytracing is on such cases return branch_copies(), branch_copies(), {} if usechangesetcentricalgo(repo): # The heuristics don't make sense when we need changeset-centric algos return _fullcopytracing(repo, c1, c2, base) # Copy trace disabling is explicitly below the node == p1 logic above # because the logic above is required for a simple copy to be kept across a # rebase. if copytracing == b'heuristics': # Do full copytracing if only non-public revisions are involved as # that will be fast enough and will also cover the copies which could # be missed by heuristics if _isfullcopytraceable(repo, c1, base): return _fullcopytracing(repo, c1, c2, base) return _heuristicscopytracing(repo, c1, c2, base) else: return _fullcopytracing(repo, c1, c2, base) def _isfullcopytraceable(repo, c1, base): """Checks that if base, source and destination are all no-public branches, if yes let's use the full copytrace algorithm for increased capabilities since it will be fast enough. `experimental.copytrace.sourcecommitlimit` can be used to set a limit for number of changesets from c1 to base such that if number of changesets are more than the limit, full copytracing algorithm won't be used. """ if c1.rev() is None: c1 = c1.p1() if c1.mutable() and base.mutable(): sourcecommitlimit = repo.ui.configint( b'experimental', b'copytrace.sourcecommitlimit' ) commits = len(repo.revs(b'%d::%d', base.rev(), c1.rev())) return commits < sourcecommitlimit return False def _checksinglesidecopies( src, dsts1, m1, m2, mb, c2, base, copy, renamedelete ): if src not in m2: # deleted on side 2 if src not in m1: # renamed on side 1, deleted on side 2 renamedelete[src] = dsts1 elif src not in mb: # Work around the "short-circuit to avoid issues with merge states" # thing in pathcopies(): pathcopies(x, y) can return a copy where the # destination doesn't exist in y. pass elif mb[src] != m2[src] and not _related(c2[src], base[src]): return elif mb[src] != m2[src] or mb.flags(src) != m2.flags(src): # modified on side 2 for dst in dsts1: copy[dst] = src class branch_copies: """Information about copies made on one side of a merge/graft. "copy" is a mapping from destination name -> source name, where source is in c1 and destination is in c2 or vice-versa. "movewithdir" is a mapping from source name -> destination name, where the file at source present in one context but not the other needs to be moved to destination by the merge process, because the other context moved the directory it is in. "renamedelete" is a mapping of source name -> list of destination names for files deleted in c1 that were renamed in c2 or vice-versa. "dirmove" is a mapping of detected source dir -> destination dir renames. This is needed for handling changes to new files previously grafted into renamed directories. """ def __init__( self, copy=None, renamedelete=None, dirmove=None, movewithdir=None ): self.copy = {} if copy is None else copy self.renamedelete = {} if renamedelete is None else renamedelete self.dirmove = {} if dirmove is None else dirmove self.movewithdir = {} if movewithdir is None else movewithdir def __repr__(self): return ( '<branch_copies\n copy=%r\n renamedelete=%r\n dirmove=%r\n movewithdir=%r\n>' % ( self.copy, self.renamedelete, self.dirmove, self.movewithdir, ) ) def _fullcopytracing(repo, c1, c2, base): """The full copytracing algorithm which finds all the new files that were added from merge base up to the top commit and for each file it checks if this file was copied from another file. This is pretty slow when a lot of changesets are involved but will track all the copies. """ m1 = c1.manifest() m2 = c2.manifest() mb = base.manifest() copies1 = pathcopies(base, c1) copies2 = pathcopies(base, c2) if not (copies1 or copies2): return branch_copies(), branch_copies(), {} inversecopies1 = {} inversecopies2 = {} for dst, src in copies1.items(): inversecopies1.setdefault(src, []).append(dst) for dst, src in copies2.items(): inversecopies2.setdefault(src, []).append(dst) copy1 = {} copy2 = {} diverge = {} renamedelete1 = {} renamedelete2 = {} allsources = set(inversecopies1) | set(inversecopies2) for src in allsources: dsts1 = inversecopies1.get(src) dsts2 = inversecopies2.get(src) if dsts1 and dsts2: # copied/renamed on both sides if src not in m1 and src not in m2: # renamed on both sides dsts1 = set(dsts1) dsts2 = set(dsts2) # If there's some overlap in the rename destinations, we # consider it not divergent. For example, if side 1 copies 'a' # to 'b' and 'c' and deletes 'a', and side 2 copies 'a' to 'c' # and 'd' and deletes 'a'. if dsts1 & dsts2: for dst in dsts1 & dsts2: copy1[dst] = src copy2[dst] = src else: diverge[src] = sorted(dsts1 | dsts2) elif src in m1 and src in m2: # copied on both sides dsts1 = set(dsts1) dsts2 = set(dsts2) for dst in dsts1 & dsts2: copy1[dst] = src copy2[dst] = src # TODO: Handle cases where it was renamed on one side and copied # on the other side elif dsts1: # copied/renamed only on side 1 _checksinglesidecopies( src, dsts1, m1, m2, mb, c2, base, copy1, renamedelete1 ) elif dsts2: # copied/renamed only on side 2 _checksinglesidecopies( src, dsts2, m2, m1, mb, c1, base, copy2, renamedelete2 ) # find interesting file sets from manifests cache = [] def _get_addedfiles(idx): if not cache: addedinm1 = m1.filesnotin(mb, repo.narrowmatch()) addedinm2 = m2.filesnotin(mb, repo.narrowmatch()) u1 = sorted(addedinm1 - addedinm2) u2 = sorted(addedinm2 - addedinm1) cache.extend((u1, u2)) return cache[idx] u1fn = lambda: _get_addedfiles(0) u2fn = lambda: _get_addedfiles(1) if repo.ui.debugflag: u1 = u1fn() u2 = u2fn() header = b" unmatched files in %s" if u1: repo.ui.debug( b"%s:\n %s\n" % (header % b'local', b"\n ".join(u1)) ) if u2: repo.ui.debug( b"%s:\n %s\n" % (header % b'other', b"\n ".join(u2)) ) renamedeleteset = set() divergeset = set() for dsts in diverge.values(): divergeset.update(dsts) for dsts in renamedelete1.values(): renamedeleteset.update(dsts) for dsts in renamedelete2.values(): renamedeleteset.update(dsts) repo.ui.debug( b" all copies found (* = to merge, ! = divergent, " b"% = renamed and deleted):\n" ) for side, copies in ((b"local", copies1), (b"remote", copies2)): if not copies: continue repo.ui.debug(b" on %s side:\n" % side) for f in sorted(copies): note = b"" if f in copy1 or f in copy2: note += b"*" if f in divergeset: note += b"!" if f in renamedeleteset: note += b"%" repo.ui.debug( b" src: '%s' -> dst: '%s' %s\n" % (copies[f], f, note) ) del renamedeleteset del divergeset repo.ui.debug(b" checking for directory renames\n") dirmove1, movewithdir2 = _dir_renames(repo, c1, copy1, copies1, u2fn) dirmove2, movewithdir1 = _dir_renames(repo, c2, copy2, copies2, u1fn) branch_copies1 = branch_copies(copy1, renamedelete1, dirmove1, movewithdir1) branch_copies2 = branch_copies(copy2, renamedelete2, dirmove2, movewithdir2) return branch_copies1, branch_copies2, diverge def _dir_renames(repo, ctx, copy, fullcopy, addedfilesfn): """Finds moved directories and files that should move with them. ctx: the context for one of the sides copy: files copied on the same side (as ctx) fullcopy: files copied on the same side (as ctx), including those that merge.manifestmerge() won't care about addedfilesfn: function returning added files on the other side (compared to ctx) """ # generate a directory move map invalid = set() dirmove = {} # examine each file copy for a potential directory move, which is # when all the files in a directory are moved to a new directory for dst, src in fullcopy.items(): dsrc, ddst = pathutil.dirname(src), pathutil.dirname(dst) if dsrc in invalid: # already seen to be uninteresting continue elif ctx.hasdir(dsrc) and ctx.hasdir(ddst): # directory wasn't entirely moved locally invalid.add(dsrc) elif dsrc in dirmove and dirmove[dsrc] != ddst: # files from the same directory moved to two different places invalid.add(dsrc) else: # looks good so far dirmove[dsrc] = ddst for i in invalid: if i in dirmove: del dirmove[i] del invalid if not dirmove: return {}, {} dirmove = {k + b"/": v + b"/" for k, v in dirmove.items()} for d in dirmove: repo.ui.debug( b" discovered dir src: '%s' -> dst: '%s'\n" % (d, dirmove[d]) ) # Sort the directories in reverse order, so we find children first # For example, if dir1/ was renamed to dir2/, and dir1/subdir1/ # was renamed to dir2/subdir2/, we want to move dir1/subdir1/file # to dir2/subdir2/file (not dir2/subdir1/file) dirmove_children_first = sorted(dirmove, reverse=True) movewithdir = {} # check unaccounted nonoverlapping files against directory moves for f in addedfilesfn(): if f not in fullcopy: for d in dirmove_children_first: if f.startswith(d): # new file added in a directory that was moved, move it df = dirmove[d] + f[len(d) :] if df not in copy: movewithdir[f] = df repo.ui.debug( b" pending file src: '%s' -> dst: '%s'\n" % (f, df) ) break return dirmove, movewithdir def _heuristicscopytracing(repo, c1, c2, base): """Fast copytracing using filename heuristics Assumes that moves or renames are of following two types: 1) Inside a directory only (same directory name but different filenames) 2) Move from one directory to another (same filenames but different directory names) Works only when there are no merge commits in the "source branch". Source branch is commits from base up to c2 not including base. If merge is involved it fallbacks to _fullcopytracing(). Can be used by setting the following config: [experimental] copytrace = heuristics In some cases the copy/move candidates found by heuristics can be very large in number and that will make the algorithm slow. The number of possible candidates to check can be limited by using the config `experimental.copytrace.movecandidateslimit` which defaults to 100. """ if c1.rev() is None: c1 = c1.p1() if c2.rev() is None: c2 = c2.p1() changedfiles = set() m1 = c1.manifest() if not repo.revs(b'%d::%d', base.rev(), c2.rev()): # If base is not in c2 branch, we switch to fullcopytracing repo.ui.debug( b"switching to full copytracing as base is not " b"an ancestor of c2\n" ) return _fullcopytracing(repo, c1, c2, base) ctx = c2 while ctx != base: if len(ctx.parents()) == 2: # To keep things simple let's not handle merges repo.ui.debug(b"switching to full copytracing because of merges\n") return _fullcopytracing(repo, c1, c2, base) changedfiles.update(ctx.files()) ctx = ctx.p1() copies2 = {} cp = _forwardcopies(base, c2) for dst, src in cp.items(): if src in m1: copies2[dst] = src # file is missing if it isn't present in the destination, but is present in # the base and present in the source. # Presence in the base is important to exclude added files, presence in the # source is important to exclude removed files. filt = lambda f: f not in m1 and f in base and f in c2 missingfiles = [f for f in changedfiles if filt(f)] copies1 = {} if missingfiles: basenametofilename = collections.defaultdict(list) dirnametofilename = collections.defaultdict(list) for f in m1.filesnotin(base.manifest()): basename = os.path.basename(f) dirname = os.path.dirname(f) basenametofilename[basename].append(f) dirnametofilename[dirname].append(f) for f in missingfiles: basename = os.path.basename(f) dirname = os.path.dirname(f) samebasename = basenametofilename[basename] samedirname = dirnametofilename[dirname] movecandidates = samebasename + samedirname # f is guaranteed to be present in c2, that's why # c2.filectx(f) won't fail f2 = c2.filectx(f) # we can have a lot of candidates which can slow down the heuristics # config value to limit the number of candidates moves to check maxcandidates = repo.ui.configint( b'experimental', b'copytrace.movecandidateslimit' ) if len(movecandidates) > maxcandidates: repo.ui.status( _( b"skipping copytracing for '%s', more " b"candidates than the limit: %d\n" ) % (f, len(movecandidates)) ) continue for candidate in movecandidates: f1 = c1.filectx(candidate) if _related(f1, f2): # if there are a few related copies then we'll merge # changes into all of them. This matches the behaviour # of upstream copytracing copies1[candidate] = f return branch_copies(copies1), branch_copies(copies2), {} def _related(f1, f2): """return True if f1 and f2 filectx have a common ancestor Walk back to common ancestor to see if the two files originate from the same file. Since workingfilectx's rev() is None it messes up the integer comparison logic, hence the pre-step check for None (f1 and f2 can only be workingfilectx's initially). """ if f1 == f2: return True # a match g1, g2 = f1.ancestors(), f2.ancestors() try: f1r, f2r = f1.linkrev(), f2.linkrev() if f1r is None: f1 = next(g1) if f2r is None: f2 = next(g2) while True: f1r, f2r = f1.linkrev(), f2.linkrev() if f1r > f2r: f1 = next(g1) elif f2r > f1r: f2 = next(g2) else: # f1 and f2 point to files in the same linkrev return f1 == f2 # true if they point to the same file except StopIteration: return False def graftcopies(wctx, ctx, base): """reproduce copies between base and ctx in the wctx Unlike mergecopies(), this function will only consider copies between base and ctx; it will ignore copies between base and wctx. Also unlike mergecopies(), this function will apply copies to the working copy (instead of just returning information about the copies). That makes it cheaper (especially in the common case of base==ctx.p1()) and useful also when experimental.copytrace=off. merge.update() will have already marked most copies, but it will only mark copies if it thinks the source files are related (see merge._related()). It will also not mark copies if the file wasn't modified on the local side. This function adds the copies that were "missed" by merge.update(). """ new_copies = pathcopies(base, ctx) parent = wctx.p1() _filter(parent, wctx, new_copies) # Extra filtering to drop copy information for files that existed before # the graft. This is to handle the case of grafting a rename onto a commit # that already has the rename. Otherwise the presence of copy information # would result in the creation of an empty commit where we would prefer to # not create one. for dest, __ in list(new_copies.items()): if dest in parent: del new_copies[dest] for dst, src in new_copies.items(): wctx[dst].markcopied(src)