Mercurial > hg
view tests/test-linelog.py @ 43623:94eac340d212
packaging: stage files and dynamically generate WiX installer
Like we did for Inno, we want to make the WiX installer
"dumb" and simply consume source files from a directory
tree rather than have to define every single file in
installer files. This will greatly decrease the amount of
effort required to maintain the WiX installer since we don't
have to think that much about keeping files in sync.
This commit changes the WiX packager to populate a staging
directory as part of packaging. After it does so, it scans
that directory and dynamically generates WiX XML defining the
content within.
The IDs and GUIDs being generated are deterministic. So,
upgrades should work as expected in Windows Installer land.
(WiX has a "heat" tool that can generate XML by walking the
filesystem but it doesn't have this deterministic property,
sadly.)
As part of this change, GUIDs are now effectively reset.
So the next upgrade should be a complete wipe and replace.
This could potentially cause issues. But in my local testing,
I was able to upgrade an existing 5.1.2 install without
issue.
Compared to the previous commit, the installed files differ
in the following:
* A ReleaseNotes.txt file is now included
* A hgrc.d/editor.rc file is now generated (mercurial.rc has been
updated to reflect this logical change to the content source)
* All files are marked as read-only. Previously, only a subset
of files were. This should help prevent unwanted tampering.
Although we may want to consider use cases like modifying
template files...
This change also means that Inno and WiX are now using very
similar code for managing the install layout. This means
that on disk both packages are nearly identical. The
differences in install layout are as follows:
* Inno has a Copying.txt vs a COPYING.rtf for WiX.
(The WiX installer wants to use RTF.)
* Inno has a Mercurial.url file that is an internet shortcut
to www.mercurial-scm.org. (This could potentially be
removed.)
* Inno includes msvc[mpr]90.dll files and WiX does not.
(WiX installs the MSVC runtime via merge modules.)
* Inno includes unins000.{dat,exe} files. (WiX's state is
managed by Windows Installer, which places things elsewhere.)
Because file lists are dynamically generated now, the test
ensuring things remain in sync has been deleted. Good riddance.
While this is a huge step towards unifying the Windows installers,
there's still some improvements that can be made. But I think
it is worth celebrating the milestone of getting both Inno
and WiX to essentially share core packaging code and workflows.
That should make it much easier to change the installers going
forward. This will aid support of Python 3.
Differential Revision: https://phab.mercurial-scm.org/D7173
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 11 Nov 2019 18:55:42 -0800 |
parents | 2372284d9457 |
children | e52a9c85a7a8 |
line wrap: on
line source
from __future__ import absolute_import, print_function import difflib import random import unittest from mercurial import linelog vecratio = 3 # number of replacelines / number of replacelines_vec maxlinenum = 0xFFFFFF maxb1 = 0xFFFFFF maxdeltaa = 10 maxdeltab = 10 def _genedits(seed, endrev): lines = [] random.seed(seed) for rev in range(0, endrev): n = len(lines) a1 = random.randint(0, n) a2 = random.randint(a1, min(n, a1 + maxdeltaa)) b1 = random.randint(0, maxb1) b2 = random.randint(b1, b1 + maxdeltab) usevec = not bool(random.randint(0, vecratio)) if usevec: blines = [ (random.randint(0, rev), random.randint(0, maxlinenum)) for _ in range(b1, b2) ] else: blines = [(rev, bidx) for bidx in range(b1, b2)] lines[a1:a2] = blines yield lines, rev, a1, a2, b1, b2, blines, usevec class linelogtests(unittest.TestCase): def testlinelogencodedecode(self): program = [ linelog._eof(0, 0), linelog._jge(41, 42), linelog._jump(0, 43), linelog._eof(0, 0), linelog._jl(44, 45), linelog._line(46, 47), ] ll = linelog.linelog(program, maxrev=100) enc = ll.encode() # round-trips okay self.assertEqual(linelog.linelog.fromdata(enc)._program, ll._program) self.assertEqual(linelog.linelog.fromdata(enc), ll) # This encoding matches the encoding used by hg-experimental's # linelog file, or is supposed to if it doesn't. self.assertEqual( enc, ( b'\x00\x00\x01\x90\x00\x00\x00\x06' b'\x00\x00\x00\xa4\x00\x00\x00*' b'\x00\x00\x00\x00\x00\x00\x00+' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\xb1\x00\x00\x00-' b'\x00\x00\x00\xba\x00\x00\x00/' ), ) def testsimpleedits(self): ll = linelog.linelog() # Initial revision: add lines 0, 1, and 2 ll.replacelines(1, 0, 0, 0, 3) self.assertEqual( [(l.rev, l.linenum) for l in ll.annotate(1)], [(1, 0), (1, 1), (1, 2),], ) # Replace line 1 with a new line ll.replacelines(2, 1, 2, 1, 2) self.assertEqual( [(l.rev, l.linenum) for l in ll.annotate(2)], [(1, 0), (2, 1), (1, 2),], ) # delete a line out of 2 ll.replacelines(3, 1, 2, 0, 0) self.assertEqual( [(l.rev, l.linenum) for l in ll.annotate(3)], [(1, 0), (1, 2),] ) # annotation of 1 is unchanged self.assertEqual( [(l.rev, l.linenum) for l in ll.annotate(1)], [(1, 0), (1, 1), (1, 2),], ) ll.annotate(3) # set internal state to revision 3 start = ll.getoffset(0) end = ll.getoffset(1) self.assertEqual(ll.getalllines(start, end), [(1, 0), (2, 1), (1, 1),]) self.assertEqual(ll.getalllines(), [(1, 0), (2, 1), (1, 1), (1, 2),]) def testparseclinelogfile(self): # This data is what the replacements in testsimpleedits # produce when fed to the original linelog.c implementation. data = ( b'\x00\x00\x00\x0c\x00\x00\x00\x0f' b'\x00\x00\x00\x00\x00\x00\x00\x02' b'\x00\x00\x00\x05\x00\x00\x00\x06' b'\x00\x00\x00\x06\x00\x00\x00\x00' b'\x00\x00\x00\x00\x00\x00\x00\x07' b'\x00\x00\x00\x06\x00\x00\x00\x02' b'\x00\x00\x00\x00\x00\x00\x00\x00' b'\x00\x00\x00\t\x00\x00\x00\t' b'\x00\x00\x00\x00\x00\x00\x00\x0c' b'\x00\x00\x00\x08\x00\x00\x00\x05' b'\x00\x00\x00\x06\x00\x00\x00\x01' b'\x00\x00\x00\x00\x00\x00\x00\x05' b'\x00\x00\x00\x0c\x00\x00\x00\x05' b'\x00\x00\x00\n\x00\x00\x00\x01' b'\x00\x00\x00\x00\x00\x00\x00\t' ) llc = linelog.linelog.fromdata(data) self.assertEqual( [(l.rev, l.linenum) for l in llc.annotate(1)], [(1, 0), (1, 1), (1, 2),], ) self.assertEqual( [(l.rev, l.linenum) for l in llc.annotate(2)], [(1, 0), (2, 1), (1, 2),], ) self.assertEqual( [(l.rev, l.linenum) for l in llc.annotate(3)], [(1, 0), (1, 2),] ) # Check we emit the same bytecode. ll = linelog.linelog() # Initial revision: add lines 0, 1, and 2 ll.replacelines(1, 0, 0, 0, 3) # Replace line 1 with a new line ll.replacelines(2, 1, 2, 1, 2) # delete a line out of 2 ll.replacelines(3, 1, 2, 0, 0) diff = '\n ' + '\n '.join( difflib.unified_diff( ll.debugstr().splitlines(), llc.debugstr().splitlines(), 'python', 'c', lineterm='', ) ) self.assertEqual(ll._program, llc._program, 'Program mismatch: ' + diff) # Done as a secondary step so we get a better result if the # program is where the mismatch is. self.assertEqual(ll, llc) self.assertEqual(ll.encode(), data) def testanothersimplecase(self): ll = linelog.linelog() ll.replacelines(3, 0, 0, 0, 2) ll.replacelines(4, 0, 2, 0, 0) self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(4)], []) self.assertEqual( [(l.rev, l.linenum) for l in ll.annotate(3)], [(3, 0), (3, 1)] ) # rev 2 is empty because contents were only ever introduced in rev 3 self.assertEqual([(l.rev, l.linenum) for l in ll.annotate(2)], []) def testrandomedits(self): # Inspired by original linelog tests. seed = random.random() numrevs = 2000 ll = linelog.linelog() # Populate linelog for lines, rev, a1, a2, b1, b2, blines, usevec in _genedits( seed, numrevs ): if usevec: ll.replacelines_vec(rev, a1, a2, blines) else: ll.replacelines(rev, a1, a2, b1, b2) ar = ll.annotate(rev) self.assertEqual(ll.annotateresult, lines) # Verify we can get back these states by annotating each rev for lines, rev, a1, a2, b1, b2, blines, usevec in _genedits( seed, numrevs ): ar = ll.annotate(rev) self.assertEqual([(l.rev, l.linenum) for l in ar], lines) def testinfinitebadprogram(self): ll = linelog.linelog.fromdata( b'\x00\x00\x00\x00\x00\x00\x00\x02' # header b'\x00\x00\x00\x00\x00\x00\x00\x01' # JUMP to self ) with self.assertRaises(linelog.LineLogError): # should not be an infinite loop and raise ll.annotate(1) if __name__ == '__main__': import silenttestrunner silenttestrunner.main(__name__)