view tests/test-convert-svn-encoding.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/encoding.svndump"

Convert while testing all possible outputs

  $ hg --debug convert svn-repo A-hg --config progress.debug=1
  initializing destination A-hg repository
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  run hg sink pre-conversion action
  scanning source...
  found trunk at 'trunk'
  found tags at 'tags'
  found branches at 'branches'
  found branch branch\xc3\xa9 at 5 (esc)
  found branch branch\xc3\xa9e at 6 (esc)
  scanning: 1/4 revisions (25.00%)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  fetching revision log for "/trunk" from 4 to 0
  parsing revision 4 (2 changes)
  parsing revision 3 (4 changes)
  parsing revision 2 (3 changes)
  parsing revision 1 (3 changes)
  no copyfrom path, don't know what to do.
  '/branches' is not under '/trunk', ignoring
  '/tags' is not under '/trunk', ignoring
  scanning: 2/4 revisions (50.00%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  fetching revision log for "/branches/branch\xc3\xa9" from 5 to 0 (esc)
  parsing revision 5 (1 changes)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  found parent of branch /branches/branch\xc3\xa9 at 4: /trunk (esc)
  scanning: 3/4 revisions (75.00%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  fetching revision log for "/branches/branch\xc3\xa9e" from 6 to 0 (esc)
  parsing revision 6 (1 changes)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  found parent of branch /branches/branch\xc3\xa9e at 5: /branches/branch\xc3\xa9 (esc)
  scanning: 4/4 revisions (100.00%)
  scanning: 5/4 revisions (125.00%)
  scanning: 6/4 revisions (150.00%)
  sorting...
  converting...
  5 init projA
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@1
  converting: 0/6 revisions (0.00%)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  4 hello
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@2
  converting: 1/6 revisions (16.67%)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa0 0/3 paths (0.00%) (esc)
  scanning paths: /trunk/\xc3\xa0/e\xcc\x81 1/3 paths (33.33%) (esc)
  scanning paths: /trunk/\xc3\xa9 2/3 paths (66.67%) (esc)
  committing files:
  \xc3\xa0/e\xcc\x81 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/2 files (50.00%) (esc)
  \xc3\xa9 (esc)
  getting files: \xc3\xa9 2/2 files (100.00%) (esc)
  committing manifest
  committing changelog
  updating the branch cache
  3 copy files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@3
  converting: 2/6 revisions (33.33%)
  scanning paths: /trunk/\xc3\xa0 0/4 paths (0.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa8 1/4 paths (25.00%) (esc)
  copied to \xc3\xa8 from \xc3\xa9@2 (esc)
  scanning paths: /trunk/\xc3\xa9 2/4 paths (50.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 3/4 paths (75.00%) (esc)
  mark /trunk/\xc3\xb9 came from \xc3\xa0:2 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/4 files (25.00%) (esc)
  getting files: \xc3\xa9 2/4 files (50.00%) (esc)
  committing files:
  \xc3\xa8 (esc)
  getting files: \xc3\xa8 3/4 files (75.00%) (esc)
   \xc3\xa8: copy \xc3\xa9:6b67ccefd5ce6de77e7ead4f5292843a0255329f (esc)
  \xc3\xb9/e\xcc\x81 (esc)
  getting files: \xc3\xb9/e\xcc\x81 4/4 files (100.00%) (esc)
   \xc3\xb9/e\xcc\x81: copy \xc3\xa0/e\xcc\x81:a9092a3d84a37b9993b5c73576f6de29b7ea50f6 (esc)
  committing manifest
  committing changelog
  updating the branch cache
  2 remove files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@4
  converting: 3/6 revisions (50.00%)
  scanning paths: /trunk/\xc3\xa8 0/2 paths (0.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 1/2 paths (50.00%) (esc)
  gone from -1
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/trunk (glob)
  getting files: \xc3\xa8 1/2 files (50.00%) (esc)
  getting files: \xc3\xb9/e\xcc\x81 2/2 files (100.00%) (esc)
  committing files:
  committing manifest
  committing changelog
  updating the branch cache
  1 branch to branch?
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?@5
  converting: 4/6 revisions (66.67%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9 (glob)
  scanning paths: /branches/branch\xc3\xa9 0/1 paths (0.00%) (esc)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  0 branch to branch?e
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?e@6
  converting: 5/6 revisions (83.33%)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  scanning paths: /branches/branch\xc3\xa9e 0/1 paths (0.00%) (esc)
  reusing manifest from p1 (no file change)
  committing changelog
  updating the branch cache
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  reparent to file:/*/$TESTTMP/svn-repo (glob)
  reparent to file:/*/$TESTTMP/svn-repo/branches/branch%C3%A9e (glob)
  updating tags
  committing files:
  .hgtags
  committing manifest
  committing changelog
  updating the branch cache
  run hg sink post-conversion action
  $ cd A-hg
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check tags are in UTF-8

  $ cat .hgtags
  e94e4422020e715add80525e8f0f46c9968689f1 branch\xc3\xa9e (esc)
  f7e66f98380ed1e53a797c5c7a7a2616a7ab377d branch\xc3\xa9 (esc)

  $ cd ..