view tests/test-hardlinks.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

#require hardlink reporevlogstore

  $ cat > nlinks.py <<EOF
  > from __future__ import print_function
  > import sys
  > from mercurial import pycompat, util
  > for f in sorted(sys.stdin.readlines()):
  >     f = f[:-1]
  >     print(util.nlinks(pycompat.fsencode(f)), f)
  > EOF

  $ nlinksdir()
  > {
  >     find "$@" -type f | "$PYTHON" $TESTTMP/nlinks.py
  > }

Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):

  $ cat > linkcp.py <<EOF
  > from __future__ import absolute_import
  > import sys
  > from mercurial import pycompat, util
  > util.copyfiles(pycompat.fsencode(sys.argv[1]),
  >                pycompat.fsencode(sys.argv[2]), hardlink=True)
  > EOF

  $ linkcp()
  > {
  >     "$PYTHON" $TESTTMP/linkcp.py $1 $2
  > }

Prepare repo r1:

  $ hg init r1
  $ cd r1

  $ echo c1 > f1
  $ hg add f1
  $ hg ci -m0

  $ mkdir d1
  $ cd d1
  $ echo c2 > f2
  $ hg add f2
  $ hg ci -m1
  $ cd ../..

  $ nlinksdir r1/.hg/store
  1 r1/.hg/store/00changelog.i
  1 r1/.hg/store/00manifest.i
  1 r1/.hg/store/data/d1/f2.i
  1 r1/.hg/store/data/f1.i
  1 r1/.hg/store/fncache (repofncache !)
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache (repofncache !)
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots


Create hardlinked clone r2:

  $ hg clone -U --debug r1 r2 --config progress.debug=true
  linking: 1 files
  linking: 2 files
  linking: 3 files
  linking: 4 files
  linking: 5 files
  linking: 6 files
  linking: 7 files
  linked 7 files

Create non-hardlinked clone r3:

  $ hg clone --pull r1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 40d85e9847f2:7069c422939c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved


Repos r1 and r2 should now contain hardlinked files:

  $ nlinksdir r1/.hg/store
  2 r1/.hg/store/00changelog.i
  2 r1/.hg/store/00manifest.i
  2 r1/.hg/store/data/d1/f2.i
  2 r1/.hg/store/data/f1.i
  2 r1/.hg/store/fncache (repofncache !)
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache (repofncache !)
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots

  $ nlinksdir r2/.hg/store
  2 r2/.hg/store/00changelog.i
  2 r2/.hg/store/00manifest.i
  2 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  2 r2/.hg/store/fncache (repofncache !)

Repo r3 should not be hardlinked:

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache (repofncache !)
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots


Create a non-inlined filelog in r3:

  $ cd r3/d1
  >>> f = open('data1', 'wb')
  >>> for x in range(10000):
  ...     f.write(b"%d\n" % x) and None
  >>> f.close()
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> f2
  >   hg commit -m$j
  > done
  $ cd ../..

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.d
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache (repofncache !)
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backup.fncache (repofncache !)
  1 r3/.hg/store/undo.backup.phaseroots
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots

Push to repo r1 should break up most hardlinks in r2:

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files

  $ cd r3
  $ hg push
  pushing to $TESTTMP/r1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 10 changesets with 10 changes to 1 files

  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re) (repofncache !)

#if hardlink-whitelisted repofncache
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 2 changesets with 2 changes to 2 files


  $ cd r1
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Committing a change to f1 in r1 must break up hardlink f1.i in r2:

  $ echo c1c1 >> f1
  $ hg ci -m00
  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  1 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re) (repofncache !)

#if hardlink-whitelisted repofncache
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

Create a file which exec permissions we will change
  $ cd r3
  $ echo "echo hello world" > f3
  $ hg add f3
  $ hg ci -mf3
  $ cd ..

  $ cd r3
  $ hg tip --template '{rev}:{node|short}\n'
  12:d3b77733a28a
  $ echo bla > f1
  $ chmod +x f3
  $ hg ci -m1
  $ cd ..

Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):

  $ linkcp r3 r4

'checklink' is produced by hardlinking a symlink, which is undefined whether
the symlink should be followed or not. It does behave differently on Linux and
BSD. Just remove it so the test pass on both platforms.

  $ rm -f r4/.hg/wcache/checklink

r4 has hardlinks in the working dir (not just inside .hg):

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  2 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  2 r4/.hg/dirstate
  2 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache (repofncache !)
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache (repofncache !)
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/.hg/wcache/checkisexec (execbit !)
  2 r4/.hg/wcache/checklink-target (symlink !)
  2 r4/.hg/wcache/checknoexec (execbit !)
  2 r4/.hg/wcache/manifestfulltextcache (reporevlogstore !)
  2 r4/d1/data1
  2 r4/d1/f2
  2 r4/f1
  2 r4/f3

Update back to revision 12 in r4 should break hardlink of file f1 and f3:
#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif


  $ hg -R r4 up 12
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved (execbit !)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved (no-execbit !)

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  1 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  1 r4/.hg/dirstate
  1 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache (repofncache !)
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/.hg/wcache/checkisexec (execbit !)
  2 r4/.hg/wcache/checklink-target (symlink !)
  2 r4/.hg/wcache/checknoexec (execbit !)
  1 r4/.hg/wcache/manifestfulltextcache (reporevlogstore !)
  2 r4/d1/data1
  2 r4/d1/f2
  1 r4/f1
  1 r4/f3 (execbit !)
  2 r4/f3 (no-execbit !)

#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif

Test hardlinking outside hg:

  $ mkdir x
  $ echo foo > x/a

  $ linkcp x y
  $ echo bar >> y/a

No diff if hardlink:

  $ diff x/a y/a

Test mq hardlinking:

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init a
  $ cd a

  $ hg qimport -n foo - << EOF
  > # HG changeset patch
  > # Date 1 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/a	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +a
  > EOF
  adding foo to series file

  $ hg qpush
  applying foo
  now at: foo

  $ cd ..
  $ linkcp a b
  $ cd b

  $ hg qimport -n bar - << EOF
  > # HG changeset patch
  > # Date 2 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/b	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +b
  > EOF
  adding bar to series file

  $ hg qpush
  applying bar
  now at: bar

  $ cat .hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar

  $ cat .hg/patches/series
  foo
  bar

  $ cat ../a/.hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo

  $ cat ../a/.hg/patches/series
  foo

Test tags hardlinking:

  $ hg qdel -r qbase:qtip
  patch foo finalized without changeset message
  patch bar finalized without changeset message

  $ hg tag -l lfoo
  $ hg tag foo

  $ cd ..
  $ linkcp b c
  $ cd c

  $ hg tag -l -r 0 lbar
  $ hg tag -r 0 bar

  $ cat .hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
  430ed4828a74fa4047bc816a25500f7472ab4bfe bar

  $ cat .hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
  430ed4828a74fa4047bc816a25500f7472ab4bfe lbar

  $ cat ../b/.hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo

  $ cat ../b/.hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo

  $ cd ..