Mercurial > hg
view tests/test-mq-guards.t @ 44763:94f4f2ec7dee stable
packaging: support building Inno installer with PyOxidizer
We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.
This commit implements basic support for producing Inno
installers using PyOxidizer.
While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.
We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.
We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.
The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.
Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:
* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file
The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.
The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.
Differential Revision: https://phab.mercurial-scm.org/D8473
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Thu, 23 Apr 2020 18:06:02 -0700 |
parents | a387b0390082 |
children | 55c6ebd11cb9 |
line wrap: on
line source
$ echo "[extensions]" >> $HGRCPATH $ echo "mq=" >> $HGRCPATH $ hg init $ hg qinit $ echo x > x $ hg ci -Ama adding x $ hg qnew a.patch $ echo a > a $ hg add a $ hg qrefresh $ hg qnew b.patch $ echo b > b $ hg add b $ hg qrefresh $ hg qnew c.patch $ echo c > c $ hg add c $ hg qrefresh $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty should fail $ hg qguard does-not-exist.patch +bleh abort: no patch named does-not-exist.patch [255] should fail $ hg qguard +fail abort: no patches applied [255] $ hg qpush applying a.patch now at: a.patch should guard a.patch $ hg qguard +a should print +a $ hg qguard a.patch: +a $ hg qpop popping a.patch patch queue now empty should fail $ hg qpush a.patch cannot push 'a.patch' - guarded by '+a' [1] $ hg qguard a.patch a.patch: +a should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop popping b.patch patch queue now empty test selection of an empty guard $ hg qselect "" abort: guard cannot be an empty string [255] $ hg qselect a number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch $ hg qpush applying a.patch now at: a.patch $ hg qguard -- c.patch -a should print -a $ hg qguard c.patch c.patch: -a should skip c.patch $ hg qpush -a applying b.patch skipping c.patch - guarded by '-a' now at: b.patch $ hg qnext all patches applied [1] should display b.patch $ hg qtop b.patch $ hg qguard -n c.patch should push c.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch popping a.patch patch queue now empty $ hg qselect -n guards deactivated number of unguarded, unapplied patches has changed from 3 to 2 should push all $ hg qpush -a applying b.patch applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qguard a.patch +1 $ hg qguard b.patch +2 $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 should push a.patch, not b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying c.patch now at: c.patch $ hg qpop -a popping c.patch popping a.patch patch queue now empty $ hg qselect 2 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qprev b.patch Used to be an issue with holes in the patch sequence So, put one hole on the base and ask for topmost patch. $ hg qtop c.patch $ hg qpop -a popping c.patch popping b.patch patch queue now empty $ hg qselect 1 2 number of unguarded, unapplied patches has changed from 2 to 3 should push a.patch, b.patch $ hg qpush applying a.patch now at: a.patch $ hg qpush applying b.patch now at: b.patch $ hg qpop -a popping b.patch popping a.patch patch queue now empty $ hg qguard -- a.patch +1 +2 -3 $ hg qselect 1 2 3 number of unguarded, unapplied patches has changed from 3 to 2 list patches and guards $ hg qguard -l a.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded have at least one patch applied to test coloring $ hg qpush applying b.patch now at: b.patch list patches and guards with color $ hg --config extensions.color= qguard --config color.mode=ansi \ > -l --color=always \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc) \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc) \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc) should pop b.patch $ hg qpop popping b.patch patch queue now empty list series $ hg qseries -v 0 G a.patch 1 U b.patch 2 U c.patch list guards $ hg qselect 1 2 3 should push b.patch $ hg qpush applying b.patch now at: b.patch $ hg qpush -a applying c.patch now at: c.patch $ hg qselect -n --reapply -v guards deactivated popping guarded patches popping c.patch popping b.patch patch queue now empty reapplying unguarded patches skipping a.patch - guarded by '+1' '+2' skipping b.patch - guarded by '+2' skipping a.patch - guarded by '+1' '+2' skipping b.patch - guarded by '+2' applying c.patch patching file c adding c committing files: c committing manifest committing changelog now at: c.patch guards in series file: +1 +2 -3 $ hg qselect -s +1 +2 -3 should show c.patch $ hg qapplied c.patch $ hg qrename a.patch new.patch should show : new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded $ hg qnew d.patch $ hg qpop popping d.patch now at: c.patch should show new.patch and b.patch as Guarded, c.patch as Applied and d.patch as Unapplied $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 U d.patch qseries again, but with color $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always 0 G \x1b[0;30;1mnew.patch\x1b[0m (esc) 1 G \x1b[0;30;1mb.patch\x1b[0m (esc) 2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc) 3 U \x1b[0;30;1md.patch\x1b[0m (esc) $ hg qguard d.patch +2 new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded. $ hg qseries -v 0 G new.patch 1 G b.patch 2 A c.patch 3 G d.patch $ qappunappv() > { > for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do > echo % hg $command > hg $command > done > } $ hg qpop -a popping c.patch patch queue now empty $ hg qguard -l new.patch: +1 +2 -3 b.patch: +2 c.patch: unguarded d.patch: +2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied c.patch % hg qunapplied -v 0 G new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qselect 1 number of unguarded, unapplied patches has changed from 1 to 2 $ qappunappv % hg qapplied % hg qapplied -v % hg qunapplied new.patch c.patch % hg qunapplied -v 0 U new.patch 1 G b.patch 2 U c.patch 3 G d.patch $ hg qpush -a applying new.patch skipping b.patch - guarded by '+2' applying c.patch skipping d.patch - guarded by '+2' now at: c.patch $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 G b.patch 2 A c.patch % hg qunapplied % hg qunapplied -v 3 G d.patch $ hg qselect 2 number of unguarded, unapplied patches has changed from 0 to 1 $ qappunappv % hg qapplied new.patch c.patch % hg qapplied -v 0 A new.patch 1 U b.patch 2 A c.patch % hg qunapplied d.patch % hg qunapplied -v 3 U d.patch $ for patch in `hg qseries`; do > echo % hg qapplied $patch > hg qapplied $patch > echo % hg qunapplied $patch > hg qunapplied $patch > done % hg qapplied new.patch new.patch % hg qunapplied new.patch b.patch d.patch % hg qapplied b.patch new.patch % hg qunapplied b.patch d.patch % hg qapplied c.patch new.patch c.patch % hg qunapplied c.patch d.patch % hg qapplied d.patch new.patch c.patch % hg qunapplied d.patch hg qseries -m: only b.patch should be shown the guards file was not ignored in the past $ hg qdelete -k b.patch $ hg qseries -m b.patch hg qseries -m with color $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always \x1b[0;31;1mb.patch\x1b[0m (esc) excercise corner cases in "qselect --reapply" $ hg qpop -a popping c.patch popping new.patch patch queue now empty $ hg qguard -- new.patch -not-new $ hg qguard -- c.patch -not-c $ hg qguard -- d.patch -not-d $ hg qpush -a applying new.patch applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qguard -l new.patch: -not-new c.patch: -not-c d.patch: -not-d $ hg qselect --reapply not-d popping guarded patches popping d.patch now at: c.patch reapplying unguarded patches cannot push 'd.patch' - guarded by '-not-d' $ hg qser -v 0 A new.patch 1 A c.patch 2 G d.patch $ hg qselect --reapply -n guards deactivated $ hg qpush applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 A c.patch 2 A d.patch $ hg qselect --reapply not-c popping guarded patches popping d.patch popping c.patch now at: new.patch reapplying unguarded patches applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 A new.patch 1 G c.patch 2 A d.patch $ hg qselect --reapply not-new popping guarded patches popping d.patch popping new.patch patch queue now empty reapplying unguarded patches applying c.patch applying d.patch patch d.patch is empty now at: d.patch $ hg qser -v 0 G new.patch 1 A c.patch 2 A d.patch test that qselect shows "number of guarded, applied patches" correctly $ hg qimport -q -e b.patch adding b.patch to series file $ hg qguard -- b.patch -not-b $ hg qpop -a -q patch queue now empty $ hg qunapplied -v 0 G new.patch 1 U c.patch 2 U d.patch 3 U b.patch $ hg qselect not-new not-c number of unguarded, unapplied patches has changed from 3 to 2 $ hg qpush -q -a patch d.patch is empty now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 A d.patch 3 A b.patch $ hg qselect --none guards deactivated $ hg qselect not-new not-c not-d number of guarded, applied patches has changed from 0 to 1 test that "qselect --reapply" reapplies patches successfully when the already applied patch becomes unguarded and it follows the already guarded (= not yet applied) one. $ hg qpop -q -a patch queue now empty $ hg qselect not-new not-c number of unguarded, unapplied patches has changed from 1 to 2 $ hg qpush -q -a patch d.patch is empty now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 A d.patch 3 A b.patch $ hg qselect -q --reapply not-c not-b now at: d.patch cannot push 'b.patch' - guarded by '-not-b' $ hg qseries -v 0 U new.patch 1 G c.patch 2 A d.patch 3 G b.patch test that "qselect --reapply" checks applied patches correctly when no applied patches becomes guarded but some of unapplied ones become unguarded. $ hg qpop -q -a patch queue now empty $ hg qselect not-new not-c not-d number of unguarded, unapplied patches has changed from 2 to 1 $ hg qpush -q -a now at: b.patch $ hg qapplied -v 0 G new.patch 1 G c.patch 2 G d.patch 3 A b.patch $ hg qselect -q --reapply not-new not-c $ hg qseries -v 0 G new.patch 1 G c.patch 2 U d.patch 3 A b.patch