view tests/test-pull-branch.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am1 # 0
  adding foo
  $ hg branch branchA
  marked working directory as branch branchA
  (branches are permanent and global, did you want a bookmark?)
  $ echo a1 > foo
  $ hg ci -ma1 # 1

  $ cd ..
  $ hg init tt
  $ cd tt
  $ hg pull ../t
  pulling from ../t
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  new changesets 495a0ec48aaf:50e089d141b7
  (run 'hg update' to get a working copy)
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ echo a2 > foo
  $ hg ci -ma2 # 2

Create branch B:

  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchB
  marked working directory as branch branchB
  $ echo b1 > foo
  $ hg ci -mb1 # 3

  $ cd ../tt

A new branch is there

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+1 heads)
  new changesets 9f878dea0b96:5be59ce5067b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Develop both branches:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a3 > foo
  $ hg ci -ma3 # 4
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b2 > foo
  $ hg ci -mb2 # 5

  $ cd ../tt

Should succeed, no new heads:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  new changesets 7c8fe7e20c32:453e93fa00a5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Add a head on other branch:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a4 > foo
  $ hg ci -ma4 # 6
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.1 > foo
  $ hg ci -m b3.1 # 7
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.2 > foo
  $ hg ci -m b3.2 # 8
  created new head

  $ cd ../tt

Should succeed because there is only one head on our branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files (+1 heads)
  new changesets da3a8a0161c6:b61cab8fe4e8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ hg up -C branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.1 > foo
  $ hg ci -ma5.1 # 9
  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.2 > foo
  $ hg ci -ma5.2 # 10
  created new head
  $ hg up 7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.1 > foo
  $ hg ci -m b4.1 # 11
  $ hg up -C 8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.2 > foo
  $ hg ci -m b4.2 # 12

  $ cd ../tt

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+1 heads)
  new changesets 0c4d148ae29e:ecfc3f4a6fd9
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "d740e1a584e7: a5.2"
  1 other heads for branch "branchA"

Make changes on new branch on tt

  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchC
  marked working directory as branch branchC
  $ echo b1 > bar
  $ hg ci -Am "commit on branchC on tt"
  adding bar

Make changes on default branch on t

  $ cd ../t
  $ hg up -C default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar
  $ hg ci -Am "commit on default on t"
  adding bar

Pull branchC from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7d8ffa4c0b22
  13 local changesets published
  (run 'hg heads' to see heads)

Make changes on default and branchC on tt

  $ cd ../tt
  $ hg pull ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 2b94b54b6b5f
  1 local changesets published
  (run 'hg heads' to see heads)
  $ hg up -C default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar1
  $ hg ci -Am "commit on default on tt"
  adding bar1
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar2
  $ hg ci -Am "commit on branchC on tt"
  adding bar2

Make changes on default and branchC on t

  $ cd ../t
  $ hg up default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar3
  $ hg ci -Am "commit on default on t"
  adding bar3
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar4
  $ hg ci -Am "commit on branchC on tt"
  adding bar4

Pull from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+2 heads)
  new changesets eed40c14b407:e634733b0309
  1 local changesets published
  (run 'hg heads .' to see heads, 'hg merge' to merge)

  $ cd ..