view tests/test-rename-dir-merge.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

  $ hg init t
  $ cd t

  $ mkdir a
  $ echo foo > a/a
  $ echo bar > a/b
  $ hg ci -Am "0"
  adding a/a
  adding a/b

  $ hg co -C 0
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a b
  moving a/a to b/a
  moving a/b to b/b
  $ hg ci -m "1 mv a/ b/"

  $ hg co -C 0
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo baz > a/c
  $ echo quux > a/d
  $ hg add a/c
  $ hg ci -m "2 add a/c"
  created new head

  $ hg merge --debug 1
    unmatched files in local:
     a/c
    unmatched files in other:
     b/a
     b/b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     on remote side:
      src: 'a/a' -> dst: 'b/a' 
      src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: ce36d17b18fb+, remote: 397f8b00a740
   a/a: other deleted -> r
  removing a/a
   a/b: other deleted -> r
  removing a/b
   b/a: remote created -> g
  getting b/a
   b/b: remote created -> g
  getting b/b
   b/c: remote directory rename - move from a/c -> dm
  moving a/c to b/c
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  M b/a
  M b/b
  A b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  $ hg ci -m "3 merge 2+1"
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88

  $ hg co -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge --debug 2
    unmatched files in local:
     b/a
     b/b
    unmatched files in other:
     a/c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     on local side:
      src: 'a/a' -> dst: 'b/a' 
      src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: 397f8b00a740+, remote: ce36d17b18fb
  starting 4 threads for background file closing (?)
   b/c: local directory rename - get from a/c -> dg
  getting a/c to b/c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  A b/c
    a/c
  ? a/d
  $ hg ci -m "4 merge 1+2"
  created new head
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88

Local directory rename with conflicting file added in remote source directory
and untracked in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg merge 2
  b/c: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat b/c
  target
but it should succeed if the content matches
  $ hg cat -r 2 a/c > b/c
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st -C
  A b/c
    a/c
  ? a/d

Local directory rename with conflicting file added in remote source directory
and committed in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg add b/c
  $ hg commit -qm 'new file in target directory'
  $ hg merge 2
  merging b/c and a/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st -A
  M b/c
    a/c
  ? a/d
  ? b/c.orig
  C b/a
  C b/b
  $ cat b/c
  <<<<<<< working copy: f1c50ca4f127 - test: new file in target directory
  target
  =======
  baz
  >>>>>>> merge rev:    ce36d17b18fb - test: 2 add a/c
  $ rm b/c.orig

Remote directory rename with conflicting file added in remote target directory
and committed in local source directory.

  $ hg co -qC 2
  $ hg st -A
  ? a/d
  C a/a
  C a/b
  C a/c
  $ hg merge 5
  merging a/c and b/c to b/c
  warning: conflicts while merging b/c! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 2 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st -A
  M b/a
  M b/b
  M b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  ? b/c.orig
  $ cat b/c
  <<<<<<< working copy: ce36d17b18fb - test: 2 add a/c
  baz
  =======
  target
  >>>>>>> merge rev:    f1c50ca4f127 - test: new file in target directory

Second scenario with two repos:

  $ cd ..
  $ hg init r1
  $ cd r1
  $ mkdir a
  $ echo foo > a/f
  $ hg add a
  adding a/f
  $ hg ci -m "a/f == foo"
  $ cd ..

  $ hg clone r1 r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r2
  $ hg mv a b
  moving a/f to b/f
  $ echo foo1 > b/f
  $ hg ci -m" a -> b, b/f == foo1"
  $ cd ..

  $ cd r1
  $ mkdir a/aa
  $ echo bar > a/aa/g
  $ hg add a/aa
  adding a/aa/g
  $ hg ci -m "a/aa/g"
  $ hg pull ../r2
  pulling from ../r2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 7d51ed18da25
  1 local changesets published
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg st -C
  M b/f
  A b/aa/g
    a/aa/g
  R a/aa/g
  R a/f

  $ cd ..

Test renames to separate directories

  $ hg init a
  $ cd a
  $ mkdir a
  $ touch a/s
  $ touch a/t
  $ hg ci -Am0
  adding a/s
  adding a/t

Add more files

  $ touch a/s2
  $ touch a/t2
  $ hg ci -Am1
  adding a/s2
  adding a/t2

Do moves on a branch

  $ hg up 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkdir s
  $ mkdir t
  $ hg mv a/s s
  $ hg mv a/t t
  $ hg ci -Am2
  created new head
  $ hg st --copies --change .
  A s/s
    a/s
  A t/t
    a/t
  R a/s
  R a/t

Merge shouldn't move s2, t2

  $ hg merge
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M a/s2
  M a/t2

Try the merge in the other direction. It may or may not be appropriate for
status to list copies here.

  $ hg up -C 1
  4 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M s/s
  M t/t
  R a/s
  R a/t