view tests/test-sparse.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > strip=
  > EOF

  $ echo a > show
  $ echo x > hide
  $ hg ci -Aqm 'initial'

  $ echo b > show
  $ echo y > hide
  $ echo aa > show2
  $ echo xx > hide2
  $ hg ci -Aqm 'two'

Verify basic --include

  $ hg up -q 0
  $ hg debugsparse --include 'hide'
  $ ls -A
  .hg
  hide

Absolute paths outside the repo should just be rejected

#if no-windows
  $ hg debugsparse --include /foo/bar
  abort: paths cannot be absolute
  [255]
  $ hg debugsparse --include '$TESTTMP/myrepo/hide'

  $ hg debugsparse --include '/root'
  abort: paths cannot be absolute
  [255]
#else
TODO: See if this can be made to fail the same way as on Unix
  $ hg debugsparse --include /c/foo/bar
  abort: paths cannot be absolute
  [255]
  $ hg debugsparse --include '$TESTTMP/myrepo/hide'

  $ hg debugsparse --include '/c/root'
  abort: paths cannot be absolute
  [255]
#endif

Paths should be treated as cwd-relative, not repo-root-relative
  $ mkdir subdir && cd subdir
  $ hg debugsparse --include path
  $ hg debugsparse
  [include]
  $TESTTMP/myrepo/hide
  hide
  subdir/path
  
  $ cd ..
  $ echo hello > subdir/file2.ext
  $ cd subdir
  $ hg debugsparse --include '**.ext'  # let us test globs
  $ hg debugsparse --include 'path:abspath'  # and a path: pattern
  $ cd ..
  $ hg debugsparse
  [include]
  $TESTTMP/myrepo/hide
  hide
  path:abspath
  subdir/**.ext
  subdir/path
  
  $ rm -rf subdir

Verify commiting while sparse includes other files

  $ echo z > hide
  $ hg ci -Aqm 'edit hide'
  $ ls -A
  .hg
  hide
  $ hg manifest
  hide
  show

Verify --reset brings files back

  $ hg debugsparse --reset
  $ ls -A
  .hg
  hide
  show
  $ cat hide
  z
  $ cat show
  a

Verify 'hg debugsparse' default output

  $ hg up -q null
  $ hg debugsparse --include 'show*'

  $ hg debugsparse
  [include]
  show*
  
Verify update only writes included files

  $ hg up -q 0
  $ ls -A
  .hg
  show

  $ hg up -q 1
  $ ls -A
  .hg
  show
  show2

Verify status only shows included files

  $ touch hide
  $ touch hide3
  $ echo c > show
  $ hg status
  M show

Adding an excluded file should fail

  $ hg add hide3
  abort: cannot add 'hide3' - it is outside the sparse checkout
  (include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
  [255]

But adding a truly excluded file shouldn't count

  $ hg add hide3 -X hide3

Verify deleting sparseness while a file has changes fails

  $ hg debugsparse --delete 'show*'
  pending changes to 'hide'
  abort: cannot change sparseness due to pending changes (delete the files or use --force to bring them back dirty)
  [255]

Verify deleting sparseness with --force brings back files

  $ hg debugsparse --delete -f 'show*'
  pending changes to 'hide'
  $ ls -A
  .hg
  hide
  hide2
  hide3
  show
  show2
  $ hg st
  M hide
  M show
  ? hide3

Verify editing sparseness fails if pending changes

  $ hg debugsparse --include 'show*'
  pending changes to 'hide'
  abort: could not update sparseness due to pending changes
  [255]

Verify adding sparseness hides files

  $ hg debugsparse --exclude -f 'hide*'
  pending changes to 'hide'
  $ ls -A
  .hg
  hide
  hide3
  show
  show2
  $ hg st
  M show

  $ hg up -qC .
TODO: add an option to purge to also purge files outside the sparse config?
  $ hg purge --all --config extensions.purge=
  $ ls -A
  .hg
  hide
  hide3
  show
  show2
For now, manually remove the files
  $ rm hide hide3

Verify rebase temporarily includes excluded files

  $ hg rebase -d 1 -r 2 --config extensions.rebase=
  rebasing 2:b91df4f39e75 "edit hide" (tip)
  temporarily included 2 file(s) in the sparse checkout for merging
  merging hide
  warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]

  $ hg debugsparse
  [exclude]
  hide*
  
  Temporarily Included Files (for merge/rebase):
  hide

  $ cat hide
  <<<<<<< dest:   39278f7c08a9 - test: two
  y
  =======
  z
  >>>>>>> source: b91df4f39e75 - test: edit hide

Verify aborting a rebase cleans up temporary files

  $ hg rebase --abort --config extensions.rebase=
  cleaned up 1 temporarily added file(s) from the sparse checkout
  rebase aborted
  $ rm hide.orig

  $ ls -A
  .hg
  show
  show2

Verify merge fails if merging excluded files

  $ hg up -q 1
  $ hg merge -r 2
  temporarily included 2 file(s) in the sparse checkout for merging
  merging hide
  warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg debugsparse
  [exclude]
  hide*
  
  Temporarily Included Files (for merge/rebase):
  hide

  $ hg up -C .
  cleaned up 1 temporarily added file(s) from the sparse checkout
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugsparse
  [exclude]
  hide*
  

Verify strip -k resets dirstate correctly

  $ hg status
  $ hg debugsparse
  [exclude]
  hide*
  
  $ hg log -r . -T '{rev}\n' --stat
  1
   hide  |  2 +-
   hide2 |  1 +
   show  |  2 +-
   show2 |  1 +
   4 files changed, 4 insertions(+), 2 deletions(-)
  
  $ hg strip -r . -k
  saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/39278f7c08a9-ce59e002-backup.hg
  $ hg status
  M show
  ? show2

Verify rebase succeeds if all changed files are in sparse checkout

  $ hg commit -Aqm "add show2"
  $ hg rebase -d 1 --config extensions.rebase=
  rebasing 2:bdde55290160 "add show2" (tip)
  saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/bdde55290160-216ed9c6-rebase.hg

Verify log --sparse only shows commits that affect the sparse checkout

  $ hg log -T '{rev} '
  2 1 0  (no-eol)
  $ hg log --sparse -T '{rev} '
  2 0  (no-eol)

Test status on a file in a subdir

  $ mkdir -p dir1/dir2
  $ touch dir1/dir2/file
  $ hg debugsparse -I dir1/dir2
  $ hg status
  ? dir1/dir2/file

Mix files and subdirectories, both "glob:" and unprefixed

  $ hg debugsparse --reset
  $ touch dir1/notshown
  $ hg commit -A dir1/notshown -m "notshown"
  $ hg debugsparse --include 'dir1/dir2'
  $ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
  ./
  ./dir1/
  ./dir1/dir2/
  ./dir1/dir2/file
  ./hide.orig
  $ hg debugsparse --delete 'dir1/dir2'
  $ hg debugsparse --include 'glob:dir1/dir2'
  $ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
  ./
  ./dir1/
  ./dir1/dir2/
  ./dir1/dir2/file
  ./hide.orig

Test that add -s adds dirs to sparse profile

  $ hg debugsparse --reset
  $ hg debugsparse --include empty
  $ hg debugsparse
  [include]
  empty
  

  $ mkdir add
  $ touch add/foo
  $ touch add/bar
  $ hg add add/foo
  abort: cannot add 'add/foo' - it is outside the sparse checkout
  (include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
  [255]
  $ hg add -s add/foo
  $ hg st
  A add/foo
  ? add/bar
  $ hg debugsparse
  [include]
  add
  empty
  
  $ hg add -s add/*
  add/foo already tracked!
  $ hg st
  A add/bar
  A add/foo
  $ hg debugsparse
  [include]
  add
  empty
  

  $ cd ..

Test non-sparse repos work while sparse is loaded
  $ hg init sparserepo
  $ hg init nonsparserepo
  $ cd sparserepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ cd ../nonsparserepo
  $ echo x > x && hg add x && hg commit -qAm x
  $ cd ../sparserepo
  $ hg clone ../nonsparserepo ../nonsparserepo2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test debugrebuilddirstate
  $ cd ../sparserepo
  $ touch included
  $ touch excluded
  $ hg add included excluded
  $ hg commit -m 'a commit' -q
  $ cp .hg/dirstate ../dirstateboth
  $ hg debugsparse -X excluded
  $ cp ../dirstateboth .hg/dirstate
  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               included

Test debugdirstate --minimal where file is in the parent manifest but not the
dirstate
  $ hg debugsparse -X included
  $ hg debugdirstate
  $ cp .hg/dirstate ../dirstateallexcluded
  $ hg debugsparse --reset
  $ hg debugsparse -X excluded
  $ cp ../dirstateallexcluded .hg/dirstate
  $ touch includedadded
  $ hg add includedadded
  $ hg debugdirstate --no-dates
  a   0         -1 unset               includedadded
  $ hg debugrebuilddirstate --minimal
  $ hg debugdirstate --no-dates
  n   0         -1 unset               included
  a   0         -1 * includedadded (glob)

Test debugdirstate --minimal where a file is not in parent manifest
but in the dirstate. This should take into account excluded files in the
manifest
  $ cp ../dirstateboth .hg/dirstate
  $ touch includedadded
  $ hg add includedadded
  $ touch excludednomanifest
  $ hg add excludednomanifest
  $ cp .hg/dirstate ../moreexcluded
  $ hg forget excludednomanifest
  $ rm excludednomanifest
  $ hg debugsparse -X excludednomanifest
  $ cp ../moreexcluded .hg/dirstate
  $ hg manifest
  excluded
  included
We have files in the dirstate that are included and excluded. Some are in the
manifest and some are not.
  $ hg debugdirstate --no-dates
  n 644          0 * excluded (glob)
  a   0         -1 * excludednomanifest (glob)
  n 644          0 * included (glob)
  a   0         -1 * includedadded (glob)
  $ hg debugrebuilddirstate --minimal
  $ hg debugdirstate --no-dates
  n 644          0 * included (glob)
  a   0         -1 * includedadded (glob)