view tests/test-wireproto-command-filedata.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

  $ . $TESTDIR/wireprotohelpers.sh

  $ hg init server
  $ enablehttpv2 server
  $ cd server
  $ cat > a << EOF
  > a0
  > 00000000000000000000000000000000000000
  > 11111111111111111111111111111111111111
  > EOF
  $ echo b0 > b
  $ mkdir -p dir0/child0 dir0/child1 dir1
  $ echo c0 > dir0/c
  $ echo d0 > dir0/d
  $ echo e0 > dir0/child0/e
  $ echo f0 > dir0/child1/f
  $ hg -q commit -A -m 'commit 0'

  $ echo a1 >> a
  $ echo d1 > dir0/d
  $ hg commit -m 'commit 1'
  $ echo f1 > dir0/child1/f
  $ hg commit -m 'commit 2'

  $ hg -q up -r 0
  $ echo a2 >> a
  $ hg commit -m 'commit 3'
  created new head

Create multiple heads introducing the same changeset

  $ hg -q up -r 0
  $ echo foo > dupe-file
  $ hg commit -Am 'dupe 1'
  adding dupe-file
  created new head
  $ hg -q up -r 0
  $ echo foo > dupe-file
  $ hg commit -Am 'dupe 2'
  adding dupe-file
  created new head

  $ hg log -G -T '{rev}:{node} {desc}\n'
  @  5:732c3dd7bee94242de656000e5f458e7ccfe2828 dupe 2
  |
  | o  4:4334f10897d13c3e8beb4b636f7272b4ec2d0322 dupe 1
  |/
  | o  3:5ce944d7fece1252dae06c34422b573c191b9489 commit 3
  |/
  | o  2:b3c27db01410dae01e5485d425b1440078df540c commit 2
  | |
  | o  1:3ef5e551f219ba505481d34d6b0316b017fa3f00 commit 1
  |/
  o  0:91b232a2253ce0638496f67bdfd7a4933fb51b25 commit 0
  

  $ hg --debug debugindex a
     rev linkrev nodeid                                   p1                                       p2
       0       0 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
       1       1 0a86321f1379d1a9ecd0579a22977af7a5acaf11 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000
       2       3 7e5801b6d5f03a5a54f3c47b583f7567aad43e5b 649d149df43d83882523b7fb1e6a3af6f1907b39 0000000000000000000000000000000000000000

  $ hg --debug debugindex dir0/child0/e
     rev linkrev nodeid                                   p1                                       p2
       0       0 bbba6c06b30f443d34ff841bc985c4d0827c6be4 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000

  $ hg --debug debugindex dupe-file
     rev linkrev nodeid                                   p1                                       p2
       0       4 2ed2a3912a0b24502043eae84ee4b279c18b90dd 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000

  $ hg serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Missing arguments is an error

  $ sendhttpv2peer << EOF
  > command filedata
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: missing required arguments: nodes, path!
  [255]

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[]
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: missing required arguments: path!
  [255]

Unknown node is an error

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa']
  >     path eval:b'a'
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  abort: unknown file node: aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!
  [255]

Fetching a single revision returns just metadata by default

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    }
  ]

Requesting parents works

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'parents']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11',
      b'parents': [
        b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    }
  ]

Requesting revision data works
(haveparents defaults to False, so fulltext is emitted)

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na1\n'
  ]

haveparents=False should be same as above

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  >     haveparents eval:False
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na1\n'
  ]

haveparents=True should emit a delta

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  >     haveparents eval:True
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Requesting multiple revisions works
(first revision is a fulltext since haveparents=False by default)

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x64\x9d\x14\x9d\xf4\x3d\x83\x88\x25\x23\xb7\xfb\x1e\x6a\x3a\xf6\xf1\x90\x7b\x39', b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          81
        ]
      ],
      b'node': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\n',
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Revisions are sorted by DAG order, parents first

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x0a\x86\x32\x1f\x13\x79\xd1\xa9\xec\xd0\x57\x9a\x22\x97\x7a\xf7\xa5\xac\xaf\x11', b'\x64\x9d\x14\x9d\xf4\x3d\x83\x88\x25\x23\xb7\xfb\x1e\x6a\x3a\xf6\xf1\x90\x7b\x39']
  >     path eval:b'a'
  >     fields eval:[b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 2
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          81
        ]
      ],
      b'node': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9'
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\n',
    {
      b'deltabasenode': b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
      b'fieldsfollowing': [
        [
          b'delta',
          15
        ]
      ],
      b'node': b'\n\x862\x1f\x13y\xd1\xa9\xec\xd0W\x9a"\x97z\xf7\xa5\xac\xaf\x11'
    },
    b'\x00\x00\x00Q\x00\x00\x00Q\x00\x00\x00\x03a1\n'
  ]

Requesting parents and revision data works

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x7e\x58\x01\xb6\xd5\xf0\x3a\x5a\x54\xf3\xc4\x7b\x58\x3f\x75\x67\xaa\xd4\x3e\x5b']
  >     path eval:b'a'
  >     fields eval:[b'parents', b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          84
        ]
      ],
      b'node': b'~X\x01\xb6\xd5\xf0:ZT\xf3\xc4{X?ug\xaa\xd4>[',
      b'parents': [
        b'd\x9d\x14\x9d\xf4=\x83\x88%#\xb7\xfb\x1ej:\xf6\xf1\x90{9',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'a0\n00000000000000000000000000000000000000\n11111111111111111111111111111111111111\na2\n'
  ]

Linknode for duplicate revision is the initial revision

  $ sendhttpv2peer << EOF
  > command filedata
  >     nodes eval:[b'\x2e\xd2\xa3\x91\x2a\x0b\x24\x50\x20\x43\xea\xe8\x4e\xe4\xb2\x79\xc1\x8b\x90\xdd']
  >     path eval:b'dupe-file'
  >     fields eval:[b'linknode', b'parents', b'revision']
  > EOF
  creating http peer for wire protocol version 2
  sending filedata command
  response: gen[
    {
      b'totalitems': 1
    },
    {
      b'fieldsfollowing': [
        [
          b'revision',
          4
        ]
      ],
      b'linknode': b'C4\xf1\x08\x97\xd1<>\x8b\xebKcorr\xb4\xec-\x03"',
      b'node': b'.\xd2\xa3\x91*\x0b$P C\xea\xe8N\xe4\xb2y\xc1\x8b\x90\xdd',
      b'parents': [
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00',
        b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
      ]
    },
    b'foo\n'
  ]

  $ cat error.log