view tests/test-http.t @ 17616:9535a0dc41f2

store: implement fncache basic path encoding in C

(This is not yet enabled; it will be turned on in a followup patch.)

The path encoding performed by fncache is complex and (perhaps
surprisingly) slow enough to negatively affect the overall performance
of Mercurial.

For a short path (< 120 bytes), the Python code can be reduced to a fairly
tractable state machine that either determines that nothing needs to be
done in a single pass, or performs the encoding in a second pass.

For longer paths, we avoid the more complicated hashed encoding scheme
for now, and fall back to Python.

Raw performance: I measured in a repo containing 150,000 files in its tip
manifest, with a median path name length of 57 bytes, and 95th percentile
of 96 bytes.

In this repo, the Python code takes 3.1 seconds to encode all path
names, while the hybrid C-and-Python code (called from Python) takes
0.21 seconds, for a speedup of about 14.

Across several other large repositories, I've measured the speedup from
the C code at between 26x and 40x.

For path names above 120 bytes where we must fall back to Python for
hashed encoding, the speedup is about 1.7x.  Thus absolute performance
will depend strongly on the characteristics of a particular repository.

  $ "$TESTDIR/hghave" serve || exit 80

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
  $ echo foo>foo.d/foo
  $ echo bar>foo.d/bAr.hg.d/BaR
  $ echo bar>foo.d/baR.d.hg/bAR
  $ hg commit -A -m 1
  adding foo
  adding foo.d/bAr.hg.d/BaR
  adding foo.d/baR.d.hg/bAR
  adding foo.d/foo
  $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
  $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid

Test server address cannot be reused

#if windows
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': * (glob)
  [255]
#else
  $ hg serve -p $HGPORT1 2>&1
  abort: cannot start server at ':$HGPORT1': Address already in use
  [255]
#endif
  $ cd ..
  $ cat hg1.pid hg2.pid >> $DAEMON_PIDS

clone via stream

  $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
  streaming all changes
  6 files to transfer, 606 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions

try to clone via stream, should use pull instead

  $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved

clone via pull

  $ hg clone http://localhost:$HGPORT1/ copy-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy-pull
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions
  $ cd test
  $ echo bar > bar
  $ hg commit -A -d '1 0' -m 2
  adding bar
  $ cd ..

clone over http with --update

  $ hg clone http://localhost:$HGPORT1/ updated --update 0
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 5 changes to 5 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg log -r . -R updated
  changeset:   0:8b6053c928fe
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  
  $ rm -rf updated

incoming via HTTP

  $ hg clone http://localhost:$HGPORT1/ --rev 0 partial
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ touch LOCAL
  $ hg ci -qAm LOCAL
  $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
  comparing with http://localhost:$HGPORT1/
  searching for changes
  2
  $ cd ..

pull

  $ cd copy-pull
  $ echo '[hooks]' >> .hg/hgrc
  $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc
  $ hg pull
  pulling from http://localhost:$HGPORT1/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/
  (run 'hg update' to get a working copy)
  $ cd ..

clone from invalid URL

  $ hg clone http://localhost:$HGPORT/bad
  abort: HTTP Error 404: Not Found
  [255]

test http authentication
+ use the same server to test server side streaming preference

  $ cd test
  $ cat << EOT > userpass.py
  > import base64
  > from mercurial.hgweb import common
  > def perform_authentication(hgweb, req, op):
  >     auth = req.env.get('HTTP_AUTHORIZATION')
  >     if not auth:
  >         raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
  >                 [('WWW-Authenticate', 'Basic Realm="mercurial"')])
  >     if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
  >         raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
  > def extsetup():
  >     common.permhooks.insert(0, perform_authentication)
  > EOT
  $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \
  >    --config server.preferuncompressed=True
  $ cat pid >> $DAEMON_PIDS

  $ hg id http://localhost:$HGPORT2/
  abort: http authorization required
  [255]
  $ hg id http://user@localhost:$HGPORT2/
  abort: http authorization required
  [255]
  $ hg id http://user:pass@localhost:$HGPORT2/
  5fed3813f7f5
  $ echo '[auth]' >> .hg/hgrc
  $ echo 'l.schemes=http' >> .hg/hgrc
  $ echo 'l.prefix=lo' >> .hg/hgrc
  $ echo 'l.username=user' >> .hg/hgrc
  $ echo 'l.password=pass' >> .hg/hgrc
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://localhost:$HGPORT2/
  5fed3813f7f5
  $ hg id http://user@localhost:$HGPORT2/
  5fed3813f7f5
  $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
  streaming all changes
  7 files to transfer, 916 bytes of data
  transferred * bytes in * seconds (*/sec) (glob)
  updating to branch default
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg id http://user2@localhost:$HGPORT2/
  abort: http authorization required
  [255]
  $ hg id http://user:pass2@localhost:$HGPORT2/
  abort: HTTP Error 403: no
  [255]

  $ cd ..

clone of serve with repo in root and unserved subrepo (issue2970)

  $ hg --cwd test init sub
  $ echo empty > test/sub/empty
  $ hg --cwd test/sub add empty
  $ hg --cwd test/sub commit -qm 'add empty'
  $ hg --cwd test/sub tag -r 0 something
  $ echo sub = sub > test/.hgsub
  $ hg --cwd test add .hgsub
  $ hg --cwd test commit -qm 'add subrepo'
  $ hg clone http://localhost:$HGPORT noslash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]
  $ hg clone http://localhost:$HGPORT/ slash-clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 7 changes to 7 files
  updating to branch default
  abort: HTTP Error 404: Not Found
  [255]

check error log

  $ cat error.log