view tests/test-mq-eol.t @ 17616:9535a0dc41f2

store: implement fncache basic path encoding in C

(This is not yet enabled; it will be turned on in a followup patch.)

The path encoding performed by fncache is complex and (perhaps
surprisingly) slow enough to negatively affect the overall performance
of Mercurial.

For a short path (< 120 bytes), the Python code can be reduced to a fairly
tractable state machine that either determines that nothing needs to be
done in a single pass, or performs the encoding in a second pass.

For longer paths, we avoid the more complicated hashed encoding scheme
for now, and fall back to Python.

Raw performance: I measured in a repo containing 150,000 files in its tip
manifest, with a median path name length of 57 bytes, and 95th percentile
of 96 bytes.

In this repo, the Python code takes 3.1 seconds to encode all path
names, while the hybrid C-and-Python code (called from Python) takes
0.21 seconds, for a speedup of about 14.

Across several other large repositories, I've measured the speedup from
the C code at between 26x and 40x.

For path names above 120 bytes where we must fall back to Python for
hashed encoding, the speedup is about 1.7x.  Thus absolute performance
will depend strongly on the characteristics of a particular repository.

Test interactions between mq and patch.eol


  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ echo "[diff]" >> $HGRCPATH
  $ echo "nodates=1" >> $HGRCPATH

  $ cat > makepatch.py <<EOF
  > f = file('eol.diff', 'wb')
  > w = f.write
  > w('test message\n')
  > w('diff --git a/a b/a\n')
  > w('--- a/a\n')
  > w('+++ b/a\n')
  > w('@@ -1,5 +1,5 @@\n')
  > w(' a\n')
  > w('-b\r\n')
  > w('+y\r\n')
  > w(' c\r\n')
  > w(' d\n')
  > w('-e\n')
  > w('\ No newline at end of file\n')
  > w('+z\r\n')
  > w('\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in file(sys.argv[1], 'rb'):
  >     line = line.replace('\r', '<CR>')
  >     line = line.replace('\n', '<LF>')
  >     print line
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ python -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ python ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ python ../cateol.py .hg/patches/eol.diff
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ python -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ python -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ python -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..