clone: make sure we warm the cache after a clone
This work around any deviciency/limitation of the clone process. In our case
this ensure the persistent nodemap exist with valid content.
Ideally, the cloning process would also do "the right thing". However since
older server will never be able to do "the right thing". The local workaround
will be necessary anyway.
I am not worried by the performance impact of this as `hg clone` is non-instant
on large repositories where is could matters. Warming the cache if they are
already correct is very fast. And if they are not already warm, this seems like
a good time to do so.
This impact various test as more cache are now warmed sooner, all the change
should be harmless.
Differential Revision: https://phab.mercurial-scm.org/D9789
#require no-reposimplestore no-chg
Set up a server
$ hg init server
$ cd server
$ cat >> .hg/hgrc << EOF
> [extensions]
> clonebundles =
> EOF
$ touch foo
$ hg -q commit -A -m 'add foo'
$ touch bar
$ hg -q commit -A -m 'add bar'
$ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
$ cat hg.pid >> $DAEMON_PIDS
$ cd ..
Missing manifest should not result in server lookup
$ hg --verbose clone -U http://localhost:$HGPORT no-manifest
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
(sent 3 HTTP requests and * bytes; received * bytes in responses) (glob)
$ cat server/access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=aaff8d2ffbbf07a46dd1f05d8ae7877e3f56e2a2&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
Empty manifest file results in retrieval
(the extension only checks if the manifest file exists)
$ touch server/.hg/clonebundles.manifest
$ hg --verbose clone -U http://localhost:$HGPORT empty-manifest
no clone bundles available on remote; falling back to regular clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
(sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)
Manifest file with invalid URL aborts
$ echo 'http://does.not.exist/bundle.hg' > server/.hg/clonebundles.manifest
$ hg clone http://localhost:$HGPORT 404-url
applying clone bundle from http://does.not.exist/bundle.hg
error fetching bundle: (.* not known|(\[Errno -?\d+] )?([Nn]o address associated with (host)?name|Temporary failure in name resolution|Name does not resolve)) (re) (no-windows !)
error fetching bundle: [Errno 1100*] getaddrinfo failed (glob) (windows !)
abort: error applying bundle
(if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
[255]
Server is not running aborts
$ echo "http://localhost:$HGPORT1/bundle.hg" > server/.hg/clonebundles.manifest
$ hg clone http://localhost:$HGPORT server-not-runner
applying clone bundle from http://localhost:$HGPORT1/bundle.hg
error fetching bundle: (.* refused.*|Protocol not supported|(.* )?\$EADDRNOTAVAIL\$|.* No route to host) (re)
abort: error applying bundle
(if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
[255]
Server returns 404
$ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
$ cat http.pid >> $DAEMON_PIDS
$ hg clone http://localhost:$HGPORT running-404
applying clone bundle from http://localhost:$HGPORT1/bundle.hg
HTTP error fetching bundle: HTTP Error 404: File not found
abort: error applying bundle
(if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
[255]
We can override failure to fall back to regular clone
$ hg --config ui.clonebundlefallback=true clone -U http://localhost:$HGPORT 404-fallback
applying clone bundle from http://localhost:$HGPORT1/bundle.hg
HTTP error fetching bundle: HTTP Error 404: File not found
falling back to normal clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
Bundle with partial content works
$ hg -R server bundle --type gzip-v1 --base null -r 53245c60e682 partial.hg
1 changesets found
We verify exact bundle content as an extra check against accidental future
changes. If this output changes, we could break old clients.
$ f --size --hexdump partial.hg
partial.hg: size=207
0000: 48 47 31 30 47 5a 78 9c 63 60 60 98 17 ac 12 93 |HG10GZx.c``.....|
0010: f0 ac a9 23 45 70 cb bf 0d 5f 59 4e 4a 7f 79 21 |...#Ep..._YNJ.y!|
0020: 9b cc 40 24 20 a0 d7 ce 2c d1 38 25 cd 24 25 d5 |..@$ ...,.8%.$%.|
0030: d8 c2 22 cd 38 d9 24 cd 22 d5 c8 22 cd 24 cd 32 |..".8.$."..".$.2|
0040: d1 c2 d0 c4 c8 d2 32 d1 38 39 29 c9 34 cd d4 80 |......2.89).4...|
0050: ab 24 b5 b8 84 cb 40 c1 80 2b 2d 3f 9f 8b 2b 31 |.$....@..+-?..+1|
0060: 25 45 01 c8 80 9a d2 9b 65 fb e5 9e 45 bf 8d 7f |%E......e...E...|
0070: 9f c6 97 9f 2b 44 34 67 d9 ec 8e 0f a0 92 0b 75 |....+D4g.......u|
0080: 41 d6 24 59 18 a4 a4 9a a6 18 1a 5b 98 9b 5a 98 |A.$Y.......[..Z.|
0090: 9a 18 26 9b a6 19 98 1a 99 99 26 a6 18 9a 98 24 |..&.......&....$|
00a0: 26 59 a6 25 5a 98 a5 18 a6 24 71 41 35 b1 43 dc |&Y.%Z....$qA5.C.|
00b0: 16 b2 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 d7 8a |.....E..V....R..|
00c0: 78 ed fc d5 76 f1 36 35 dc 05 00 36 ed 5e c7 |x...v.65...6.^.|
$ echo "http://localhost:$HGPORT1/partial.hg" > server/.hg/clonebundles.manifest
$ hg clone -U http://localhost:$HGPORT partial-bundle
applying clone bundle from http://localhost:$HGPORT1/partial.hg
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
finished applying clone bundle
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets aaff8d2ffbbf
1 local changesets published
Incremental pull doesn't fetch bundle
$ hg clone -r 53245c60e682 -U http://localhost:$HGPORT partial-clone
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 53245c60e682
$ cd partial-clone
$ hg pull
pulling from http://localhost:$HGPORT/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets aaff8d2ffbbf
(run 'hg update' to get a working copy)
$ cd ..
Bundle with full content works
$ hg -R server bundle --type gzip-v2 --base null -r tip full.hg
2 changesets found
Again, we perform an extra check against bundle content changes. If this content
changes, clone bundles produced by new Mercurial versions may not be readable
by old clients.
$ f --size --hexdump full.hg
full.hg: size=442
0000: 48 47 32 30 00 00 00 0e 43 6f 6d 70 72 65 73 73 |HG20....Compress|
0010: 69 6f 6e 3d 47 5a 78 9c 63 60 60 d0 e4 76 f6 70 |ion=GZx.c``..v.p|
0020: f4 73 77 75 0f f2 0f 0d 60 00 02 46 46 76 26 4e |.swu....`..FFv&N|
0030: c6 b2 d4 a2 e2 cc fc 3c 03 a3 bc a4 e4 8c c4 bc |.......<........|
0040: f4 d4 62 23 06 06 e6 19 40 f9 4d c1 2a 31 09 cf |..b#....@.M.*1..|
0050: 9a 3a 52 04 b7 fc db f0 95 e5 a4 f4 97 17 b2 c9 |.:R.............|
0060: 0c 14 00 02 e6 d9 99 25 1a a7 a4 99 a4 a4 1a 5b |.......%.......[|
0070: 58 a4 19 27 9b a4 59 a4 1a 59 a4 99 a4 59 26 5a |X..'..Y..Y...Y&Z|
0080: 18 9a 18 59 5a 26 1a 27 27 25 99 a6 99 1a 70 95 |...YZ&.''%....p.|
0090: a4 16 97 70 19 28 18 70 a5 e5 e7 73 71 25 a6 a4 |...p.(.p...sq%..|
00a0: 28 00 19 20 17 af fa df ab ff 7b 3f fb 92 dc 8b |(.. ......{?....|
00b0: 1f 62 bb 9e b7 d7 d9 87 3d 5a 44 89 2f b0 99 87 |.b......=ZD./...|
00c0: ec e2 54 63 43 e3 b4 64 43 73 23 33 43 53 0b 63 |..TcC..dCs#3CS.c|
00d0: d3 14 23 03 a0 fb 2c 2c 0c d3 80 1e 30 49 49 b1 |..#...,,....0II.|
00e0: 4c 4a 32 48 33 30 b0 34 42 b8 38 29 b1 08 e2 62 |LJ2H30.4B.8)...b|
00f0: 20 03 6a ca c2 2c db 2f f7 2c fa 6d fc fb 34 be | .j..,./.,.m..4.|
0100: fc 5c 21 a2 39 cb 66 77 7c 00 0d c3 59 17 14 58 |.\!.9.fw|...Y..X|
0110: 49 16 06 29 a9 a6 29 86 c6 16 e6 a6 16 a6 26 86 |I..)..).......&.|
0120: c9 a6 69 06 a6 46 66 a6 89 29 86 26 26 89 49 96 |..i..Ff..).&&.I.|
0130: 69 89 16 66 29 86 29 49 5c 20 07 3e 16 fe 23 ae |i..f).)I\ .>..#.|
0140: 26 da 1c ab 10 1f d1 f8 e3 b3 ef cd dd fc 0c 93 |&...............|
0150: 88 75 34 36 75 04 82 55 17 14 36 a4 38 10 04 d8 |.u46u..U..6.8...|
0160: 21 01 9a b1 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 |!......E..V....R|
0170: d7 8a 78 ed fc d5 76 f1 36 25 81 89 c7 ad ec 90 |..x...v.6%......|
0180: 54 47 75 2b 89 48 b1 b2 62 c9 89 c9 19 a9 56 45 |TGu+.H..b.....VE|
0190: a9 65 ba 49 45 89 79 c9 19 ba 60 01 a0 14 23 58 |.e.IE.y...`...#X|
01a0: 81 35 c8 7d 40 cc 04 e2 a4 a4 a6 25 96 e6 94 60 |.5.}@......%...`|
01b0: 33 17 5f 54 00 00 d3 1b 0d 4c |3._T.....L|
$ echo "http://localhost:$HGPORT1/full.hg" > server/.hg/clonebundles.manifest
$ hg clone -U http://localhost:$HGPORT full-bundle
applying clone bundle from http://localhost:$HGPORT1/full.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Feature works over SSH
$ hg clone -U -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/server ssh-full-clone
applying clone bundle from http://localhost:$HGPORT1/full.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Entry with unknown BUNDLESPEC is filtered and not used
$ cat > server/.hg/clonebundles.manifest << EOF
> http://bad.entry1 BUNDLESPEC=UNKNOWN
> http://bad.entry2 BUNDLESPEC=xz-v1
> http://bad.entry3 BUNDLESPEC=none-v100
> http://localhost:$HGPORT1/full.hg BUNDLESPEC=gzip-v2
> EOF
$ hg clone -U http://localhost:$HGPORT filter-unknown-type
applying clone bundle from http://localhost:$HGPORT1/full.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Automatic fallback when all entries are filtered
$ cat > server/.hg/clonebundles.manifest << EOF
> http://bad.entry BUNDLESPEC=UNKNOWN
> EOF
$ hg clone -U http://localhost:$HGPORT filter-all
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
We require a Python version that supports SNI. Therefore, URLs requiring SNI
are not filtered.
$ cp full.hg sni.hg
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/sni.hg REQUIRESNI=true
> http://localhost:$HGPORT1/full.hg
> EOF
$ hg clone -U http://localhost:$HGPORT sni-supported
applying clone bundle from http://localhost:$HGPORT1/sni.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Stream clone bundles are supported
$ hg -R server debugcreatestreamclonebundle packed.hg
writing 613 bytes for 4 files
bundle requirements: generaldelta, revlogv1, sparserevlog
No bundle spec should work
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/packed.hg
> EOF
$ hg clone -U http://localhost:$HGPORT stream-clone-no-spec
applying clone bundle from http://localhost:$HGPORT1/packed.hg
4 files to transfer, 613 bytes of data
transferred 613 bytes in *.* seconds (*) (glob)
finished applying clone bundle
searching for changes
no changes found
Bundle spec without parameters should work
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
> EOF
$ hg clone -U http://localhost:$HGPORT stream-clone-vanilla-spec
applying clone bundle from http://localhost:$HGPORT1/packed.hg
4 files to transfer, 613 bytes of data
transferred 613 bytes in *.* seconds (*) (glob)
finished applying clone bundle
searching for changes
no changes found
Bundle spec with format requirements should work
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
> EOF
$ hg clone -U http://localhost:$HGPORT stream-clone-supported-requirements
applying clone bundle from http://localhost:$HGPORT1/packed.hg
4 files to transfer, 613 bytes of data
transferred 613 bytes in *.* seconds (*) (glob)
finished applying clone bundle
searching for changes
no changes found
Stream bundle spec with unknown requirements should be filtered out
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
> EOF
$ hg clone -U http://localhost:$HGPORT stream-clone-unsupported-requirements
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
Set up manifest for testing preferences
(Remember, the TYPE does not have to match reality - the URL is
important)
$ cp full.hg gz-a.hg
$ cp full.hg gz-b.hg
$ cp full.hg bz2-a.hg
$ cp full.hg bz2-b.hg
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2 extra=a
> http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2 extra=a
> http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
> http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
> EOF
Preferring an undefined attribute will take first entry
$ hg --config ui.clonebundleprefers=foo=bar clone -U http://localhost:$HGPORT prefer-foo
applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Preferring bz2 type will download first entry of that type
$ hg --config ui.clonebundleprefers=COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-bz
applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Preferring multiple values of an option works
$ hg --config ui.clonebundleprefers=COMPRESSION=unknown,COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-multiple-bz
applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Sorting multiple values should get us back to original first entry
$ hg --config ui.clonebundleprefers=BUNDLESPEC=unknown,BUNDLESPEC=gzip-v2,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-multiple-gz
applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Preferring multiple attributes has correct order
$ hg --config ui.clonebundleprefers=extra=b,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-separate-attributes
applying clone bundle from http://localhost:$HGPORT1/bz2-b.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Test where attribute is missing from some entries
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
> http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2
> http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
> http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
> EOF
$ hg --config ui.clonebundleprefers=extra=b clone -U http://localhost:$HGPORT prefer-partially-defined-attribute
applying clone bundle from http://localhost:$HGPORT1/gz-b.hg
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
Test a bad attribute list
$ hg --config ui.clonebundleprefers=bad clone -U http://localhost:$HGPORT bad-input
abort: invalid ui.clonebundleprefers item: bad
(each comma separated item should be key=value pairs)
[255]
$ hg --config ui.clonebundleprefers=key=val,bad,key2=val2 clone \
> -U http://localhost:$HGPORT bad-input
abort: invalid ui.clonebundleprefers item: bad
(each comma separated item should be key=value pairs)
[255]
Test interaction between clone bundles and --stream
A manifest with just a gzip bundle
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
> EOF
$ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
streaming all changes
9 files to transfer, 816 bytes of data
transferred 816 bytes in * seconds (*) (glob)
A manifest with a stream clone but no BUNDLESPEC
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/packed.hg
> EOF
$ hg clone -U --stream http://localhost:$HGPORT uncompressed-no-bundlespec
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
streaming all changes
9 files to transfer, 816 bytes of data
transferred 816 bytes in * seconds (*) (glob)
A manifest with a gzip bundle and a stream clone
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
> EOF
$ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed
applying clone bundle from http://localhost:$HGPORT1/packed.hg
4 files to transfer, 613 bytes of data
transferred 613 bytes in * seconds (*) (glob)
finished applying clone bundle
searching for changes
no changes found
A manifest with a gzip bundle and stream clone with supported requirements
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
> EOF
$ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-requirements
applying clone bundle from http://localhost:$HGPORT1/packed.hg
4 files to transfer, 613 bytes of data
transferred 613 bytes in * seconds (*) (glob)
finished applying clone bundle
searching for changes
no changes found
A manifest with a gzip bundle and a stream clone with unsupported requirements
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
> http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
> EOF
$ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-unsupported-requirements
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
streaming all changes
9 files to transfer, 816 bytes of data
transferred 816 bytes in * seconds (*) (glob)
Test clone bundle retrieved through bundle2
$ cat << EOF >> $HGRCPATH
> [extensions]
> largefiles=
> EOF
$ killdaemons.py
$ hg -R server serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
$ cat hg.pid >> $DAEMON_PIDS
$ hg -R server debuglfput gz-a.hg
1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae
$ cat > server/.hg/clonebundles.manifest << EOF
> largefile://1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae BUNDLESPEC=gzip-v2
> EOF
$ hg clone -U http://localhost:$HGPORT largefile-provided --traceback
applying clone bundle from largefile://1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
searching for changes
no changes found
2 local changesets published
$ killdaemons.py
A manifest with a gzip bundle requiring too much memory for a 16MB system and working
on a 32MB system.
$ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
$ cat http.pid >> $DAEMON_PIDS
$ hg -R server serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
$ cat hg.pid >> $DAEMON_PIDS
$ cat > server/.hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2 REQUIREDRAM=12MB
> EOF
$ hg clone -U --debug --config ui.available-memory=16MB http://localhost:$HGPORT gzip-too-large
using http://localhost:$HGPORT/
sending capabilities command
sending clonebundles command
filtering http://localhost:$HGPORT1/gz-a.hg as it needs more than 2/3 of system memory
no compatible clone bundles available on server; falling back to regular clone
(you may want to report this to the server operator)
query 1; heads
sending batch command
requesting all changes
sending getbundle command
bundle2-input-bundle: with-transaction
bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
adding changesets
add changeset 53245c60e682
add changeset aaff8d2ffbbf
adding manifests
adding file changes
adding bar revisions
adding foo revisions
bundle2-input-part: total payload size 920
bundle2-input-part: "listkeys" (params: 1 mandatory) supported
bundle2-input-part: "phase-heads" supported
bundle2-input-part: total payload size 24
bundle2-input-part: "cache:rev-branch-cache" (advisory) supported
bundle2-input-part: total payload size 59
bundle2-input-bundle: 4 parts total
checking for updated bookmarks
updating the branch cache
added 2 changesets with 2 changes to 2 files
new changesets 53245c60e682:aaff8d2ffbbf
calling hook changegroup.lfiles: hgext.largefiles.reposetup.checkrequireslfiles
updating the branch cache
(sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)
$ hg clone -U --debug --config ui.available-memory=32MB http://localhost:$HGPORT gzip-too-large2
using http://localhost:$HGPORT/
sending capabilities command
sending clonebundles command
applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
bundle2-input-bundle: 1 params with-transaction
bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
adding changesets
add changeset 53245c60e682
add changeset aaff8d2ffbbf
adding manifests
adding file changes
adding bar revisions
adding foo revisions
bundle2-input-part: total payload size 920
bundle2-input-part: "cache:rev-branch-cache" (advisory) supported
bundle2-input-part: total payload size 59
bundle2-input-bundle: 2 parts total
updating the branch cache
added 2 changesets with 2 changes to 2 files
finished applying clone bundle
query 1; heads
sending batch command
searching for changes
all remote heads known locally
no changes found
sending getbundle command
bundle2-input-bundle: with-transaction
bundle2-input-part: "listkeys" (params: 1 mandatory) supported
bundle2-input-part: "phase-heads" supported
bundle2-input-part: total payload size 24
bundle2-input-bundle: 2 parts total
checking for updated bookmarks
2 local changesets published
calling hook changegroup.lfiles: hgext.largefiles.reposetup.checkrequireslfiles
updating the branch cache
(sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)
$ killdaemons.py