view tests/test-blackbox.t @ 33352:967ac37f3d45

cleanupnode: do not use generator for node mapping

The 'successors' part of the mappings used of be a tuple. This avoid issue from
code consuming the generator "by mistake". For example, an extension inspecting the
mapping content used to be able to iterate over the successors mapping without
consequence.

Since the mapping are small we do not expect any performance impact we use tuple
again for this.

setup
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > blackbox=
  > mock=$TESTDIR/mockblackbox.py
  > mq=
  > [alias]
  > confuse = log --limit 3
  > EOF
  $ hg init blackboxtest
  $ cd blackboxtest

command, exit codes, and duration

  $ echo a > a
  $ hg add a
  $ hg blackbox --config blackbox.dirty=True
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox

alias expansion is logged
  $ hg confuse
  $ hg blackbox
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> add a exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000+ (5000)> blackbox --config *blackbox.dirty=True* exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> confuse
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> alias 'confuse' expands to 'log --limit 3'
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> confuse exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> blackbox

incoming change tracking

create two heads to verify that we only see one change in the log later
  $ hg commit -ma
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > b
  $ hg commit -Amb
  adding b
  created new head

clone, commit, pull
  $ hg clone . ../blackboxtest2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c > c
  $ hg commit -Amc
  adding c
  $ cd ../blackboxtest2
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg blackbox -l 6
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pull
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> updated served branch cache in * seconds (glob)
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> wrote served branch cache with 1 labels and 2 nodes
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> 1 incoming changes - new heads: d02f48003e62
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pull exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> blackbox -l 6

we must not cause a failure if we cannot write to the log

  $ hg rollback
  repository tip rolled back to revision 1 (undo pull)

  $ mv .hg/blackbox.log .hg/blackbox.log-
  $ mkdir .hg/blackbox.log
  $ hg --debug incoming
  warning: cannot write to blackbox.log: * (glob)
  comparing with $TESTTMP/blackboxtest (glob)
  query 1; heads
  searching for changes
  all local heads known remotely
  changeset:   2:d02f48003e62c24e2659d97d30f2a83abe5d5d51
  tag:         tip
  phase:       draft
  parent:      1:6563da9dcf87b1949716e38ff3e3dfaa3198eb06
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    2:ab9d46b053ebf45b7996f2922b9893ff4b63d892
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files+:      c
  extra:       branch=default
  description:
  c
  
  
  $ hg pull
  pulling from $TESTTMP/blackboxtest (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  (run 'hg update' to get a working copy)

a failure reading from the log is fatal

  $ hg blackbox -l 3
  abort: *$TESTTMP/blackboxtest2/.hg/blackbox.log* (glob)
  [255]

  $ rmdir .hg/blackbox.log
  $ mv .hg/blackbox.log- .hg/blackbox.log

backup bundles get logged

  $ touch d
  $ hg commit -Amd
  adding d
  created new head
  $ hg strip tip
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/*-backup.hg (glob)
  $ hg blackbox -l 6
  1970/01/01 00:00:00 bob @73f6ee326b27d820b0472f1a825e3a50f3dc489b (5000)> strip tip
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> saved backup bundle to $TESTTMP/blackboxtest2/.hg/strip-backup/73f6ee326b27-7612e004-backup.hg (glob)
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> updated base branch cache in * seconds (glob)
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> wrote base branch cache with 1 labels and 2 nodes
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> strip tip exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> blackbox -l 6

extension and python hooks - use the eol extension for a pythonhook

  $ echo '[extensions]' >> .hg/hgrc
  $ echo 'eol=' >> .hg/hgrc
  $ echo '[hooks]' >> .hg/hgrc
  $ echo 'update = echo hooked' >> .hg/hgrc
  $ hg update
  hooked
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "d02f48003e62: c"
  1 other heads for branch "default"
  $ hg blackbox -l 6
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> update
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> writing .hg/cache/tags2-visible with 0 tags
  1970/01/01 00:00:00 bob @6563da9dcf87b1949716e38ff3e3dfaa3198eb06 (5000)> pythonhook-preupdate: hgext.eol.preupdate finished in * seconds (glob)
  1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> exthook-update: echo hooked finished in * seconds (glob)
  1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> update exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @d02f48003e62c24e2659d97d30f2a83abe5d5d51 (5000)> blackbox -l 6

log rotation

  $ echo '[blackbox]' >> .hg/hgrc
  $ echo 'maxsize = 20 b' >> .hg/hgrc
  $ echo 'maxfiles = 3' >> .hg/hgrc
  $ hg status
  $ hg status
  $ hg status
  $ hg tip -q
  2:d02f48003e62
  $ ls .hg/blackbox.log*
  .hg/blackbox.log
  .hg/blackbox.log.1
  .hg/blackbox.log.2
  $ cd ..

  $ hg init blackboxtest3
  $ cd blackboxtest3
  $ hg blackbox
  1970/01/01 00:00:00 bob @0000000000000000000000000000000000000000 (5000)> blackbox
  $ mv .hg/blackbox.log .hg/blackbox.log-
  $ mkdir .hg/blackbox.log
  $ sed -e 's/\(.*test1.*\)/#\1/; s#\(.*commit2.*\)#os.rmdir(".hg/blackbox.log")\
  > os.rename(".hg/blackbox.log-", ".hg/blackbox.log")\
  > \1#' $TESTDIR/test-dispatch.py > ../test-dispatch.py
  $ $PYTHON $TESTDIR/blackbox-readonly-dispatch.py
  running: add foo
  result: 0
  running: commit -m commit1 -d 2000-01-01 foo
  result: None
  running: commit -m commit2 -d 2000-01-02 foo
  result: None
  running: log -r 0
  changeset:   0:0e4634943879
  user:        test
  date:        Sat Jan 01 00:00:00 2000 +0000
  summary:     commit1
  
  result: None
  running: log -r tip
  changeset:   1:45589e459b2e
  tag:         tip
  user:        test
  date:        Sun Jan 02 00:00:00 2000 +0000
  summary:     commit2
  
  result: None
  $ hg blackbox
  1970/01/01 00:00:00 bob @0e46349438790c460c5c9f7546bfcd39b267bbd2 (5000)> commit -m commit2 -d 2000-01-02 foo
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> updated served branch cache in * seconds (glob)
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> wrote served branch cache with 1 labels and 1 nodes
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> commit -m commit2 -d 2000-01-02 foo exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r 0
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> writing .hg/cache/tags2-visible with 0 tags
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r 0 exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r tip
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> log -r tip exited 0 after * seconds (glob)
  1970/01/01 00:00:00 bob @45589e459b2edfbf3dbde7e01f611d2c1e7453d7 (5000)> blackbox

Test log recursion from dirty status check

  $ cat > ../r.py <<EOF
  > from mercurial import context, error, extensions
  > x=[False]
  > def status(orig, *args, **opts):
  >     args[0].repo().ui.log("broken", "recursion?")
  >     return orig(*args, **opts)
  > def reposetup(ui, repo):
  >     extensions.wrapfunction(context.basectx, 'status', status)
  > EOF
  $ hg id --config extensions.x=../r.py --config blackbox.dirty=True
  45589e459b2e tip

cleanup
  $ cd ..