view tests/test-exchange-obsmarkers-case-A5.t @ 33352:967ac37f3d45

cleanupnode: do not use generator for node mapping

The 'successors' part of the mappings used of be a tuple. This avoid issue from
code consuming the generator "by mistake". For example, an extension inspecting the
mapping content used to be able to iterate over the successors mapping without
consequence.

Since the mapping are small we do not expect any performance impact we use tuple
again for this.

============================================
Testing obsolescence markers push: Cases A.5
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 5: partial reordering

A.5 partial reordering
======================

..
.. {{{
..   B ø⇠⇠
..     | ⇡
..   A ø⇠⇠⇠○ A'
..     | ⇡/
..     | ○ B'
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `Aø⇠○ A'`
..  * `Bø⇠○ B'`
..
.. Command run:
..
..  * hg push -r B
..
.. Expected exchange:
..
..  * `Bø⇠○ B'`
..
.. Expected Exclude:
..
..  * `Aø⇠○ A'`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.5
  creating test repo for test case A.5
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B0
  $ hg update 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit B1
  created new head
  $ mkcommit A1
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A0)'`
  $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  $ hg log -G --hidden
  @  8c0a98c83722 (draft): A1
  |
  o  f6298a8ac3a4 (draft): B1
  |
  | x  6e72f0a95b5e (draft): B0
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test
-----------

  $ dotest A.5 B1
  ## Running testcase A.5
  # testing echange of "B1" (f6298a8ac3a4)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "B1" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "f6298a8ac3a4" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f 8c0a98c8372212c6efde4bfdcef006f27ff759d3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}