test: fix the flakyness in test-remotefilelog-local.t
I now get about 80% of my `test-chg` CI run that fails on flakyness in this
tests.
It turns out this is only ambiguous status that end up doing file download. So…
calling status early will do that potential download separately and the calls we
scrutinize during that test will be just fine.
#require no-chg
persistent-nodemap is not enabled by default. It is not relevant for this test so disable it.
$ cat << EOF >> $HGRCPATH
> [format]
> use-persistent-nodemap = no
> EOF
Helper function to run protocol tests against multiple protocol versions.
This is easier than using #testcases because managing differences between
protocols with inline conditional output is hard to read.
$ debugwireproto() {
> commands=`cat -`
> echo 'testing ssh1'
> echo "${commands}" | hg --verbose debugwireproto --localssh
> }
$ cat >> $HGRCPATH << EOF
> [devel]
> debug.peer-request = true
> [extensions]
> sshprotoext = $TESTDIR/sshprotoext.py
> EOF
$ hg init server
$ cd server
$ echo 0 > foo
$ hg -q add foo
$ hg commit -m initial
A no-op connection performs a handshake
$ hg debugwireproto --localssh << EOF
> EOF
creating ssh peer from handshake results
Raw peers don't perform any activity
$ hg debugwireproto --localssh --peer raw << EOF
> EOF
using raw connection to peer
$ hg debugwireproto --localssh --peer ssh1 << EOF
> EOF
creating ssh peer for wire protocol version 1
Test a normal behaving server, for sanity
$ cd ..
$ hg --debug debugpeer ssh://user@dummy/server
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: \d+ (re)
remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Server should answer the "hello" command in isolation
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
`hg debugserve --sshstdio` works
$ cd server
$ hg debugserve --sshstdio << EOF
> hello
> EOF
\d+ (re)
capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
I/O logging works
$ hg debugserve --sshstdio --logiofd 1 << EOF
> hello
> EOF
e> flush() -> None
o> write(4) -> 4:
o> \d+\\n (re)
o> write\(\d+\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
\d+ (re)
capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
o> flush() -> None
$ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF
> hello
> EOF
\d+ (re)
capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
$ cat $TESTTMP/io
e> flush() -> None
o> write(4) -> 4:
o> \d+\\n (re)
o> write\(\d+\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> flush() -> None
$ cd ..
>=0.9.1 clients send a "hello" + "between" for the null range as part of handshake.
Server should reply with capabilities and should send "1\n\n" as a successful
reply with empty response to the "between".
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
SSH banner is not printed by default, ignored by clients
$ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server
url: ssh://user@dummy/server
local: no
pushable: yes
--debug will print the banner
$ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: banner: line 0
remote: banner: line 1
remote: banner: line 2
remote: banner: line 3
remote: banner: line 4
remote: banner: line 5
remote: banner: line 6
remote: banner: line 7
remote: banner: line 8
remote: banner: line 9
remote: \d+ (re)
remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
And test the banner with the raw protocol
$ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 15:
o> banner: line 0\n
o> readline() -> 15:
o> banner: line 1\n
o> readline() -> 15:
o> banner: line 2\n
o> readline() -> 15:
o> banner: line 3\n
o> readline() -> 15:
o> banner: line 4\n
o> readline() -> 15:
o> banner: line 5\n
o> readline() -> 15:
o> banner: line 6\n
o> readline() -> 15:
o> banner: line 7\n
o> readline() -> 15:
o> banner: line 8\n
o> readline() -> 15:
o> banner: line 9\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Connecting to a <0.9.1 server that doesn't support the hello command.
The client should refuse, as we dropped support for connecting to such
servers.
$ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 1
abort: no suitable response from remote hg
[255]
Sending an unknown command to the server results in an empty response to that command
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> pre-hello\n
> readline
> raw
> hello\n
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(10) -> 10:
i> pre-hello\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re)
sending no-args command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: \d+ (re)
remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send multiple unknown commands before hello
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> unknown1\n
> readline
> raw
> unknown2\n
> readline
> raw
> unknown3\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(9) -> 9:
i> unknown1\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown2\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown3\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R server serve --stdio['"] (re)
sending unknown1 command
sending unknown2 command
sending unknown3 command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 0
remote: 0
remote: \d+ (re)
remote: capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash (re)
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send an unknown command before hello that has arguments
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> with-args\n
> foo 13\n
> value for foo\n
> bar 13\n
> value for bar\n
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(52) -> 52:
i> with-args\n
i> foo 13\n
i> value for foo\n
i> bar 13\n
i> value for bar\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command having an argument that looks numeric
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 0\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 1\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 1\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
When sending a dict argument value, it is serialized to
"<arg> <item count>" followed by "<key> <len>\n<value>" for each item
in the dict.
Dictionary value for unknown command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> key2 3\n
> bar\n
> key3 3\n
> baz\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(48) -> 48:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
i> key2 3\n
i> bar\n
i> key3 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
Incomplete dictionary send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(26) -> 26:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Incomplete value send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> fo
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(24) -> 24:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> fo
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Send a command line with spaces
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown withspace\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(18) -> 18:
i> unknown withspace\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with multiple spaces\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> EOF
using raw connection to peer
i> write(29) -> 29:
i> unknown with multiple spaces\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with spaces\n
> key 10\n
> some value\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(38) -> 38:
i> unknown with spaces\n
i> key 10\n
i> some value\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command after the "between"
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
i> write(105) -> 105:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
And one with arguments
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> raw
> unknown\n
> foo 5\n
> \nvalue\n
> bar 3\n
> baz\n
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
i> write(31) -> 31:
i> unknown\n
i> foo 5\n
i> \n
i> value\n
i> bar 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 0:
Send a valid command before the handshake
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
And a variation that doesn't send the between command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> \d+\\n (re)
$ cd ..
Test listkeys for listing namespaces
$ hg init empty
$ cd empty
$ debugwireproto << EOF
> command listkeys
> namespace namespaces
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(13) -> 13:
i> namespace 10\n
i> write(10) -> 10: namespaces
i> flush() -> None
o> bufferedreadline() -> 3:
o> 30\n
o> bufferedread(30) -> 30:
o> bookmarks\t\n
o> namespaces\t\n
o> phases\t
response: {
b'bookmarks': b'',
b'namespaces': b'',
b'phases': b''
}
$ cd ..
Test listkeys for bookmarks
$ hg init bookmarkrepo
$ cd bookmarkrepo
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ echo 1 > foo
$ hg commit -m second
With no bookmarks set
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 2:
o> 0\n
response: {}
With a single bookmark set
$ hg book -r 0 bookA
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 46\n
o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
}
With multiple bookmarks set
$ hg book -r 1 bookB
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 93\n
o> bufferedread(93) -> 93:
o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
}
Test pushkey for bookmarks
$ debugwireproto << EOF
> command pushkey
> namespace bookmarks
> key remote
> old
> new 68986213bd4485ea51533535e3fc9e78007a711f
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(6) -> 6:
i> key 6\n
i> write(6) -> 6: remote
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> write(7) -> 7:
i> new 40\n
i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
i> write(6) -> 6:
i> old 0\n
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg bookmarks
bookA 0:68986213bd44
bookB 1:1880f3755e2e
remote 0:68986213bd44
$ cd ..
Test listkeys for phases
$ hg init phasesrepo
$ cd phasesrepo
Phases on empty repo
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Create some commits
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'head 1 commit 1'
$ echo 2 > foo
$ hg commit -m 'head 1 commit 2'
$ hg -q up 0
$ echo 1a > foo
$ hg commit -m 'head 2 commit 1'
created new head
$ echo 2a > foo
$ hg commit -m 'head 2 commit 2'
Two draft heads
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 101\n
o> bufferedread(101) -> 101:
o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
Single draft head
$ hg phase --public -r 2
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 58\n
o> bufferedread(58) -> 58:
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
All public heads
$ hg phase --public -r 4
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Setting public phase via pushkey
$ hg phase --draft --force -r .
$ debugwireproto << EOF
> command pushkey
> namespace phases
> key 7127240a084fd9dc86fe8d1f98e26229161ec82b
> old 1
> new 0
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(7) -> 7:
i> key 40\n
i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> write(6) -> 6:
i> new 1\n
i> write(1) -> 1: 0
i> write(6) -> 6:
i> old 1\n
i> write(1) -> 1: 1
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg phase .
4: public
$ cd ..
Test batching of requests
$ hg init batching
$ cd batching
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'commit 1'
$ hg -q up 0
$ echo 2 > foo
$ hg commit -m 'commit 2'
created new head
$ hg book -r 1 bookA
$ hg book -r 2 bookB
$ debugwireproto << EOF
> batchbegin
> command heads
> command listkeys
> namespace bookmarks
> command listkeys
> namespace phases
> batchsubmit
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> \d+\\n (re)
o> readline\(\) -> \d+: (re)
o> capabilities: batch branchmap \$USUAL_BUNDLE2_CAPS\$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=[^ ,]+(,[^ ,]+)* unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\\n (re)
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending batch with 3 sub-commands
i> write(6) -> 6:
i> batch\n
i> write(4) -> 4:
i> * 0\n
i> write(8) -> 8:
i> cmds 61\n
i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 278\n
o> bufferedread(278) -> 278:
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
o> publishing\tTrue
response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue