view tests/test-convert-svn-sink.t @ 37032:98663bed146e

rebase: store rebase state after each commit

Before this patch, we stored the rebase state early in the processing
of a node, before we updated the rebase state to indicate that the
node was processed. This meant that we could redo the working copy
merge and run into conflicts. However, this only happened in the
--collapse case if the rebase was interrupted while editing the final
commit message; in the case earlier interruptions, we would instead
detect the in-process revision by finding two dirstate parents.

This patch moves the writing of the rebase state to after we have
completed the revision completely, and, importantly, after we have
updated the rebase state to mark it done. This means we'll realize
that all nodes have been rebased in the case mentioned above of
editing the final commit message of a --collapse. See change to test
case.

I also moved the writing outside of the large if/elif block in
_rebasenode(). This shouldn't matter much, but seems cleaner. One
observable effect is if rebase was interrupted just after ignoring an
obsolete node ("not rebasing ####, already in destination"), we used
to come up with the same decision after --continue too, but after this
patch we'll instead say "already rebased ###". This seems more
consistent, since that's what we would do with obsolete nodes that had
been marked done earlier in the process (not only just before the
interruption).

Differential Revision: https://phab.mercurial-scm.org/D2913

#require svn13

  $ svnupanddisplay()
  > {
  >     (
  >        cd $1;
  >        svn up -q;
  >        svn st -v | sed 's/  */ /g' | sort
  >        limit=''
  >        if [ $2 -gt 0 ]; then
  >            limit="--limit=$2"
  >        fi
  >        svn log --xml -v $limit | $PYTHON "$TESTDIR/svnxml.py"
  >     )
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ hg init a

Add

  $ echo a > a/a
  $ mkdir -p a/d1/d2
  $ echo b > a/d1/d2/b
  $ hg --cwd a ci -d '0 0' -A -m 'add a file'
  adding a
  adding d1/d2/b

Modify

  $ svn-safe-append.py a a/a
  $ hg --cwd a ci -d '1 0' -m 'modify a file'
  $ hg --cwd a tip -q
  1:e0e2b8a9156b

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 add a file
  0 modify a file
  $ svnupanddisplay a-hg-wc 2
   2 1 test d1
   2 1 test d1/d2
   2 1 test d1/d2/b
   2 2 test .
   2 2 test a
  revision: 2
  author: test
  msg: modify a file
   M /a
  revision: 1
  author: test
  msg: add a file
   A /a
   A /d1
   A /d1/d2
   A /d1/d2/b
  $ ls a a-hg-wc
  a:
  a
  d1
  
  a-hg-wc:
  a
  d1
  $ cmp a/a a-hg-wc/a

Rename

  $ hg --cwd a mv a b
  $ hg --cwd a ci -d '2 0' -m 'rename a file'
  $ hg --cwd a tip -q
  2:eb5169441d43

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 rename a file
  $ svnupanddisplay a-hg-wc 1
   3 1 test d1
   3 1 test d1/d2
   3 1 test d1/d2/b
   3 3 test .
   3 3 test b
  revision: 3
  author: test
  msg: rename a file
   D /a
   A /b (from /a@2)
  $ ls a a-hg-wc
  a:
  b
  d1
  
  a-hg-wc:
  b
  d1

Copy

  $ hg --cwd a cp b c

  $ hg --cwd a ci -d '3 0' -m 'copy a file'
  $ hg --cwd a tip -q
  3:60effef6ab48

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy a file
  $ svnupanddisplay a-hg-wc 1
   4 1 test d1
   4 1 test d1/d2
   4 1 test d1/d2/b
   4 3 test b
   4 4 test .
   4 4 test c
  revision: 4
  author: test
  msg: copy a file
   A /c (from /b@3)
  $ ls a a-hg-wc
  a:
  b
  c
  d1
  
  a-hg-wc:
  b
  c
  d1

  $ hg --cwd a rm b

Remove

  $ hg --cwd a ci -d '4 0' -m 'remove a file'
  $ hg --cwd a tip -q
  4:87bbe3013fb6

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 remove a file
  $ svnupanddisplay a-hg-wc 1
   5 1 test d1
   5 1 test d1/d2
   5 1 test d1/d2/b
   5 4 test c
   5 5 test .
  revision: 5
  author: test
  msg: remove a file
   D /b
  $ ls a a-hg-wc
  a:
  c
  d1
  
  a-hg-wc:
  c
  d1

Executable

#if execbit
  $ chmod +x a/c
#else
  $ echo fake >> a/c
#endif
  $ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
  $ hg --cwd a tip -q
  5:ff42e473c340
#else
  $ hg --cwd a tip -q
  5:817a700c8cf1
#endif

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 make a file executable
  $ svnupanddisplay a-hg-wc 1
   6 1 test d1
   6 1 test d1/d2
   6 1 test d1/d2/b
   6 6 test .
   6 6 test c
  revision: 6
  author: test
  msg: make a file executable
   M /c
#if execbit
  $ test -x a-hg-wc/c
#endif

#if symlink

Symlinks

  $ ln -s a/missing a/link
  $ hg --cwd a commit -Am 'add symlink'
  adding link
  $ hg --cwd a mv link newlink
  $ hg --cwd a commit -m 'move symlink'
  $ hg convert -d svn a a-svnlink
  initializing svn repository 'a-svnlink'
  initializing svn working copy 'a-svnlink-wc'
  scanning source...
  sorting...
  converting...
  7 add a file
  6 modify a file
  5 rename a file
  4 copy a file
  3 remove a file
  2 make a file executable
  1 add symlink
  0 move symlink
  $ svnupanddisplay a-svnlink-wc 1
   8 1 test d1
   8 1 test d1/d2
   8 1 test d1/d2/b
   8 6 test c
   8 8 test .
   8 8 test newlink
  revision: 8
  author: test
  msg: move symlink
   D /link
   A /newlink (from /link@7)

Make sure our changes don't affect the rest of the test cases

  $ hg --cwd a up 5
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd a --config extensions.strip= strip -r 6
  saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg

#endif

Convert with --full adds and removes files that didn't change

  $ touch a/f
  $ hg -R a ci -Aqmf
  $ echo "rename c d" > filemap
  $ hg convert -d svn a --filemap filemap --full
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 f
  $ svnupanddisplay a-hg-wc 1
   7 7 test .
   7 7 test d
   7 7 test f
  revision: 7
  author: test
  msg: f
   D /c
   A /d
   D /d1
   A /f

  $ rm -rf a a-hg a-hg-wc


Executable in new directory

  $ hg init a

  $ mkdir a/d1
  $ echo a > a/d1/a
#if execbit
  $ chmod +x a/d1/a
#else
  $ echo fake >> a/d1/a
#endif
  $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
  adding d1/a

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 add executable file in new directory
  $ svnupanddisplay a-hg-wc 1
   1 1 test .
   1 1 test d1
   1 1 test d1/a
  revision: 1
  author: test
  msg: add executable file in new directory
   A /d1
   A /d1/a
#if execbit
  $ test -x a-hg-wc/d1/a
#endif

Copy to new directory

  $ mkdir a/d2
  $ hg --cwd a cp d1/a d2/a
  $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy file to new directory
  $ svnupanddisplay a-hg-wc 1
   2 1 test d1
   2 1 test d1/a
   2 2 test .
   2 2 test d2
   2 2 test d2/a
  revision: 2
  author: test
  msg: copy file to new directory
   A /d2
   A /d2/a (from /d1/a@1)

Branchy history

  $ hg init b
  $ echo base > b/b
  $ hg --cwd b ci -d '0 0' -Ambase
  adding b

  $ svn-safe-append.py left-1 b/b
  $ echo left-1 > b/left-1
  $ hg --cwd b ci -d '1 0' -Amleft-1
  adding left-1

  $ svn-safe-append.py left-2 b/b
  $ echo left-2 > b/left-2
  $ hg --cwd b ci -d '2 0' -Amleft-2
  adding left-2

  $ hg --cwd b up 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

  $ svn-safe-append.py right-1 b/b
  $ echo right-1 > b/right-1
  $ hg --cwd b ci -d '3 0' -Amright-1
  adding right-1
  created new head

  $ svn-safe-append.py right-2 b/b
  $ echo right-2 > b/right-2
  $ hg --cwd b ci -d '4 0' -Amright-2
  adding right-2

  $ hg --cwd b up -C 2
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg --cwd b merge
  merging b
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg --cwd b revert -r 2 b
  $ hg --cwd b resolve -m b
  (no more unresolved files)
  $ hg --cwd b ci -d '5 0' -m 'merge'

Expect 4 changes

  $ hg convert -d svn b
  assuming destination b-hg
  initializing svn repository 'b-hg'
  initializing svn working copy 'b-hg-wc'
  scanning source...
  sorting...
  converting...
  5 base
  4 left-1
  3 left-2
  2 right-1
  1 right-2
  0 merge

  $ svnupanddisplay b-hg-wc 0
   4 2 test left-1
   4 3 test b
   4 3 test left-2
   4 4 test .
   4 4 test right-1
   4 4 test right-2
  revision: 4
  author: test
  msg: merge
   A /right-1
   A /right-2
  revision: 3
  author: test
  msg: left-2
   M /b
   A /left-2
  revision: 2
  author: test
  msg: left-1
   M /b
   A /left-1
  revision: 1
  author: test
  msg: base
   A /b

Tags are not supported, but must not break conversion

  $ rm -rf a a-hg a-hg-wc
  $ hg init a
  $ echo a > a/a
  $ hg --cwd a ci -d '0 0' -A -m 'Add file a'
  adding a
  $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 Add file a
  0 Tagged as v1.0
  writing Subversion tags is not yet implemented
  $ svnupanddisplay a-hg-wc 2
   2 1 test a
   2 2 test .
   2 2 test .hgtags
  revision: 2
  author: test
  msg: Tagged as v1.0
   A /.hgtags
  revision: 1
  author: test
  msg: Add file a
   A /a
  $ rm -rf a a-hg a-hg-wc