view tests/test-hardlinks.t @ 37032:98663bed146e

rebase: store rebase state after each commit

Before this patch, we stored the rebase state early in the processing
of a node, before we updated the rebase state to indicate that the
node was processed. This meant that we could redo the working copy
merge and run into conflicts. However, this only happened in the
--collapse case if the rebase was interrupted while editing the final
commit message; in the case earlier interruptions, we would instead
detect the in-process revision by finding two dirstate parents.

This patch moves the writing of the rebase state to after we have
completed the revision completely, and, importantly, after we have
updated the rebase state to mark it done. This means we'll realize
that all nodes have been rebased in the case mentioned above of
editing the final commit message of a --collapse. See change to test
case.

I also moved the writing outside of the large if/elif block in
_rebasenode(). This shouldn't matter much, but seems cleaner. One
observable effect is if rebase was interrupted just after ignoring an
obsolete node ("not rebasing ####, already in destination"), we used
to come up with the same decision after --continue too, but after this
patch we'll instead say "already rebased ###". This seems more
consistent, since that's what we would do with obsolete nodes that had
been marked done earlier in the process (not only just before the
interruption).

Differential Revision: https://phab.mercurial-scm.org/D2913

#require hardlink

  $ cat > nlinks.py <<EOF
  > from __future__ import print_function
  > import sys
  > from mercurial import util
  > for f in sorted(sys.stdin.readlines()):
  >     f = f[:-1]
  >     print(util.nlinks(f), f)
  > EOF

  $ nlinksdir()
  > {
  >     find "$@" -type f | $PYTHON $TESTTMP/nlinks.py
  > }

Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):

  $ cat > linkcp.py <<EOF
  > from __future__ import absolute_import
  > import sys
  > from mercurial import util
  > util.copyfiles(sys.argv[1], sys.argv[2], hardlink=True)
  > EOF

  $ linkcp()
  > {
  >     $PYTHON $TESTTMP/linkcp.py $1 $2
  > }

Prepare repo r1:

  $ hg init r1
  $ cd r1

  $ echo c1 > f1
  $ hg add f1
  $ hg ci -m0

  $ mkdir d1
  $ cd d1
  $ echo c2 > f2
  $ hg add f2
  $ hg ci -m1
  $ cd ../..

  $ nlinksdir r1/.hg/store
  1 r1/.hg/store/00changelog.i
  1 r1/.hg/store/00manifest.i
  1 r1/.hg/store/data/d1/f2.i
  1 r1/.hg/store/data/f1.i
  1 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots


Create hardlinked clone r2:

  $ hg clone -U --debug r1 r2 --config progress.debug=true
  linking: 1
  linking: 2
  linking: 3
  linking: 4
  linking: 5
  linking: 6
  linking: 7
  linked 7 files

Create non-hardlinked clone r3:

  $ hg clone --pull r1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 40d85e9847f2:7069c422939c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved


Repos r1 and r2 should now contain hardlinked files:

  $ nlinksdir r1/.hg/store
  2 r1/.hg/store/00changelog.i
  2 r1/.hg/store/00manifest.i
  2 r1/.hg/store/data/d1/f2.i
  2 r1/.hg/store/data/f1.i
  2 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.backup.fncache
  1 r1/.hg/store/undo.backupfiles
  1 r1/.hg/store/undo.phaseroots

  $ nlinksdir r2/.hg/store
  2 r2/.hg/store/00changelog.i
  2 r2/.hg/store/00manifest.i
  2 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  2 r2/.hg/store/fncache

Repo r3 should not be hardlinked:

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots


Create a non-inlined filelog in r3:

  $ cd r3/d1
  >>> f = open('data1', 'wb')
  >>> for x in range(10000):
  ...     f.write("%s\n" % str(x))
  >>> f.close()
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> f2
  >   hg commit -m$j
  > done
  $ cd ../..

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.d
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.backup.fncache
  1 r3/.hg/store/undo.backup.phaseroots
  1 r3/.hg/store/undo.backupfiles
  1 r3/.hg/store/undo.phaseroots

Push to repo r1 should break up most hardlinks in r2:

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd r3
  $ hg push
  pushing to $TESTTMP/r1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 10 changesets with 10 changes to 1 files

  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re)

#if hardlink-whitelisted
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions


  $ cd r1
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Committing a change to f1 in r1 must break up hardlink f1.i in r2:

  $ echo c1c1 >> f1
  $ hg ci -m00
  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  1 r2/.hg/store/data/f1.i
  [12] r2/\.hg/store/fncache (re)

#if hardlink-whitelisted
  $ nlinksdir r2/.hg/store/fncache
  2 r2/.hg/store/fncache
#endif

Create a file which exec permissions we will change
  $ cd r3
  $ echo "echo hello world" > f3
  $ hg add f3
  $ hg ci -mf3
  $ cd ..

  $ cd r3
  $ hg tip --template '{rev}:{node|short}\n'
  12:d3b77733a28a
  $ echo bla > f1
  $ chmod +x f3
  $ hg ci -m1
  $ cd ..

Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):

  $ linkcp r3 r4

'checklink' is produced by hardlinking a symlink, which is undefined whether
the symlink should be followed or not. It does behave differently on Linux and
BSD. Just remove it so the test pass on both platforms.

  $ rm -f r4/.hg/cache/checklink

r4 has hardlinks in the working dir (not just inside .hg):

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  2 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  ? r4/.hg/cache/checklink-target (glob) (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  2 r4/.hg/dirstate
  2 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  2 r4/f1
  2 r4/f3

Update back to revision 12 in r4 should break hardlink of file f1 and f3:
#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif


  $ hg -R r4 up 12
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved (execbit !)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved (no-execbit !)

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  1 r4/.hg/branch
  2 r4/.hg/cache/branch2-base
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/cache/checkisexec (execbit !)
  2 r4/.hg/cache/checklink-target (symlink !)
  2 r4/.hg/cache/checknoexec (execbit !)
  2 r4/.hg/cache/rbc-names-v1
  2 r4/.hg/cache/rbc-revs-v1
  1 r4/.hg/dirstate
  1 r4/.hg/fsmonitor.state (fsmonitor !)
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/data/f3.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.backup.fncache
  2 r4/.hg/store/undo.backup.phaseroots
  2 r4/.hg/store/undo.backupfiles
  2 r4/.hg/store/undo.phaseroots
  [24] r4/\.hg/undo\.backup\.dirstate (re)
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  [24] r4/\.hg/undo\.dirstate (re)
  2 r4/d1/data1
  2 r4/d1/f2
  1 r4/f1
  1 r4/f3 (execbit !)
  2 r4/f3 (no-execbit !)

#if hardlink-whitelisted
  $ nlinksdir r4/.hg/undo.backup.dirstate r4/.hg/undo.dirstate
  4 r4/.hg/undo.backup.dirstate
  4 r4/.hg/undo.dirstate
#endif

Test hardlinking outside hg:

  $ mkdir x
  $ echo foo > x/a

  $ linkcp x y
  $ echo bar >> y/a

No diff if hardlink:

  $ diff x/a y/a

Test mq hardlinking:

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init a
  $ cd a

  $ hg qimport -n foo - << EOF
  > # HG changeset patch
  > # Date 1 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/a	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +a
  > EOF
  adding foo to series file

  $ hg qpush
  applying foo
  now at: foo

  $ cd ..
  $ linkcp a b
  $ cd b

  $ hg qimport -n bar - << EOF
  > # HG changeset patch
  > # Date 2 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/b	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +b
  > EOF
  adding bar to series file

  $ hg qpush
  applying bar
  now at: bar

  $ cat .hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar

  $ cat .hg/patches/series
  foo
  bar

  $ cat ../a/.hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo

  $ cat ../a/.hg/patches/series
  foo

Test tags hardlinking:

  $ hg qdel -r qbase:qtip
  patch foo finalized without changeset message
  patch bar finalized without changeset message

  $ hg tag -l lfoo
  $ hg tag foo

  $ cd ..
  $ linkcp b c
  $ cd c

  $ hg tag -l -r 0 lbar
  $ hg tag -r 0 bar

  $ cat .hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
  430ed4828a74fa4047bc816a25500f7472ab4bfe bar

  $ cat .hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
  430ed4828a74fa4047bc816a25500f7472ab4bfe lbar

  $ cat ../b/.hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo

  $ cat ../b/.hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo

  $ cd ..