view tests/test-mq-eol.t @ 37032:98663bed146e

rebase: store rebase state after each commit

Before this patch, we stored the rebase state early in the processing
of a node, before we updated the rebase state to indicate that the
node was processed. This meant that we could redo the working copy
merge and run into conflicts. However, this only happened in the
--collapse case if the rebase was interrupted while editing the final
commit message; in the case earlier interruptions, we would instead
detect the in-process revision by finding two dirstate parents.

This patch moves the writing of the rebase state to after we have
completed the revision completely, and, importantly, after we have
updated the rebase state to mark it done. This means we'll realize
that all nodes have been rebased in the case mentioned above of
editing the final commit message of a --collapse. See change to test
case.

I also moved the writing outside of the large if/elif block in
_rebasenode(). This shouldn't matter much, but seems cleaner. One
observable effect is if rebase was interrupted just after ignoring an
obsolete node ("not rebasing ####, already in destination"), we used
to come up with the same decision after --continue too, but after this
patch we'll instead say "already rebased ###". This seems more
consistent, since that's what we would do with obsolete nodes that had
been marked done earlier in the process (not only just before the
interruption).

Differential Revision: https://phab.mercurial-scm.org/D2913

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = open('eol.diff', 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-b\r\n')
  > w(b'+y\r\n')
  > w(b' c\r\n')
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in open(sys.argv[1], 'rb'):
  >     line = line.replace(b'\r', b'<CR>')
  >     line = line.replace(b'\n', b'<LF>')
  >     print(line)
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ $PYTHON -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ $PYTHON ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ $PYTHON ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ $PYTHON ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ $PYTHON ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ $PYTHON ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ $PYTHON -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ $PYTHON -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ $PYTHON -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..