view tests/test-push.t @ 37032:98663bed146e

rebase: store rebase state after each commit

Before this patch, we stored the rebase state early in the processing
of a node, before we updated the rebase state to indicate that the
node was processed. This meant that we could redo the working copy
merge and run into conflicts. However, this only happened in the
--collapse case if the rebase was interrupted while editing the final
commit message; in the case earlier interruptions, we would instead
detect the in-process revision by finding two dirstate parents.

This patch moves the writing of the rebase state to after we have
completed the revision completely, and, importantly, after we have
updated the rebase state to mark it done. This means we'll realize
that all nodes have been rebased in the case mentioned above of
editing the final commit message of a --collapse. See change to test
case.

I also moved the writing outside of the large if/elif block in
_rebasenode(). This shouldn't matter much, but seems cleaner. One
observable effect is if rebase was interrupted just after ignoring an
obsolete node ("not rebasing ####, already in destination"), we used
to come up with the same decision after --continue too, but after this
patch we'll instead say "already rebased ###". This seems more
consistent, since that's what we would do with obsolete nodes that had
been marked done earlier in the process (not only just before the
interruption).

Differential Revision: https://phab.mercurial-scm.org/D2913

==================================
Basic testing for the push command
==================================

Testing of the '--rev' flag
===========================

  $ hg init test-revflag
  $ hg -R test-revflag unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  new changesets bfaf4b5cbf01:916f1afdef90
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    echo
  >    hg init test-revflag-"$i"
  >    hg -R test-revflag push -r "$i" test-revflag-"$i"
  >    hg -R test-revflag-"$i" verify
  > done
  
  pushing to test-revflag-0
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  
  pushing to test-revflag-1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  
  pushing to test-revflag-2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  
  pushing to test-revflag-3
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 4 changesets, 4 total revisions
  
  pushing to test-revflag-4
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  
  pushing to test-revflag-5
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  
  pushing to test-revflag-6
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 4 changesets, 5 total revisions
  
  pushing to test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  3 files, 5 changesets, 6 total revisions
  
  pushing to test-revflag-8
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 5 changesets, 5 total revisions

  $ cd test-revflag-8

  $ hg pull ../test-revflag-7
  pulling from ../test-revflag-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  new changesets c70afb1ee985:faa2e4234c7a
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 9 changesets, 7 total revisions

  $ cd ..

Test server side validation during push
=======================================

  $ hg init test-validation
  $ cd test-validation

  $ cat > .hg/hgrc <<EOF
  > [server]
  > validate=1
  > EOF

  $ echo alpha > alpha
  $ echo beta > beta
  $ hg addr
  adding alpha
  adding beta
  $ hg ci -m 1

  $ cd ..
  $ hg clone test-validation test-validation-clone
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

Test spurious filelog entries:

  $ cd test-validation-clone
  $ echo blah >> beta
  $ cp .hg/store/data/beta.i tmp1
  $ hg ci -m 2
  $ cp .hg/store/data/beta.i tmp2
  $ hg -q rollback
  $ mv tmp2 .hg/store/data/beta.i
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: dddc47b3ba30 not in manifests
  2 files, 2 changesets, 4 total revisions
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: received spurious file revlog entry
  [255]

  $ hg -q rollback
  $ mv tmp1 .hg/store/data/beta.i
  $ echo beta > beta

Test missing filelog entries:

  $ cp .hg/store/data/beta.i tmp
  $ echo blah >> beta
  $ hg ci -m '2 (corrupt)'
  $ mv tmp .hg/store/data/beta.i

Expected to fail:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
   beta@1: manifest refers to unknown revision dddc47b3ba30
  2 files, 2 changesets, 2 total revisions
  1 integrity errors encountered!
  (first damaged changeset appears to be 1)
  [1]

  $ hg push
  pushing to $TESTTMP/test-validation
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  transaction abort!
  rollback completed
  abort: missing file data for beta:dddc47b3ba30e54484720ce0f4f768a0f4b6efb9 - run hg verify
  [255]

  $ cd ..

Test push hook locking
=====================

  $ hg init 1

  $ echo '[ui]' >> 1/.hg/hgrc
  $ echo 'timeout = 10' >> 1/.hg/hgrc

  $ echo foo > 1/foo
  $ hg --cwd 1 ci -A -m foo
  adding foo

  $ hg clone 1 2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone 2 3
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cat <<EOF > $TESTTMP/debuglocks-pretxn-hook.sh
  > hg debuglocks
  > true
  > EOF
  $ echo '[hooks]' >> 2/.hg/hgrc
  $ echo "pretxnchangegroup.a = sh $TESTTMP/debuglocks-pretxn-hook.sh" >> 2/.hg/hgrc
  $ echo 'changegroup.push = hg push -qf ../1' >> 2/.hg/hgrc

  $ echo bar >> 3/foo
  $ hg --cwd 3 ci -m bar

  $ hg --cwd 3 push ../2 --config devel.legacy.exchange=bundle1
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  lock:  user *, process * (*s) (glob)
  wlock: free

  $ hg --cwd 1 --config extensions.strip= strip tip -q
  $ hg --cwd 2 --config extensions.strip= strip tip -q
  $ hg --cwd 3 push ../2 # bundle2+
  pushing to ../2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  lock:  user *, process * (*s) (glob)
  wlock: user *, process * (*s) (glob)

Test bare push with multiple race checking options
--------------------------------------------------

  $ hg init test-bare-push-no-concurrency
  $ hg init test-bare-push-unrelated-concurrency
  $ hg -R test-revflag push -r 0 test-bare-push-no-concurrency --config server.concurrent-push-mode=strict
  pushing to test-bare-push-no-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg -R test-revflag push -r 0 test-bare-push-unrelated-concurrency --config server.concurrent-push-mode=check-related
  pushing to test-bare-push-unrelated-concurrency
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg -R test-revflag push 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pushing to ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg -R test-revflag push 'ssh://fakehost|touch${IFS}owned/path'
  pushing to ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg!
  [255]
  $ hg -R test-revflag push 'ssh://fakehost%7Ctouch%20owned/path'
  pushing to ssh://fakehost%7Ctouch%20owned/path
  abort: no suitable response from remote hg!
  [255]

  $ [ ! -f owned ] || echo 'you got owned'