stream-clone: split the stream part out of test-persistent-nodemap.t
We want to test multiple variants, so let's make it an independent test.
Small adaptations and simplifications are needed in the test output as the
tested repository is now shorter.
setup
$ cat >> $HGRCPATH <<EOF
> [extensions]
> share =
> [format]
> use-share-safe = True
> [storage]
> revlog.persistent-nodemap.slow-path=allow
> # enforce zlib to ensure we can upgrade to zstd later
> [format]
> revlog-compression=zlib
> # we want to be able to enable it later
> use-persistent-nodemap=no
> EOF
prepare source repo
$ hg init source
$ cd source
$ cat .hg/requires
dirstate-v2 (dirstate-v2 !)
share-safe
$ cat .hg/store/requires
dotencode
fncache
generaldelta
revlogv1
sparserevlog
store
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
share-safe
sparserevlog
store
$ echo a > a
$ hg ci -Aqm "added a"
$ echo b > b
$ hg ci -Aqm "added b"
$ HGEDITOR=cat hg config --shared
abort: repository is not shared; can't use --shared
[10]
$ cd ..
Create a shared repo and check the requirements are shared and read correctly
$ hg share source shared1
updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd shared1
$ cat .hg/requires
dirstate-v2 (dirstate-v2 !)
share-safe
shared
$ hg debugrequirements -R ../source
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
share-safe
sparserevlog
store
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
share-safe
shared
sparserevlog
store
$ echo c > c
$ hg ci -Aqm "added c"
Check that config of the source repository is also loaded
$ hg showconfig ui.curses
[1]
$ echo "[ui]" >> ../source/.hg/hgrc
$ echo "curses=true" >> ../source/.hg/hgrc
$ hg showconfig ui.curses
true
Test that extensions of source repository are also loaded
$ hg debugextensions
share
$ hg extdiff -p echo
hg: unknown command 'extdiff'
'extdiff' is provided by the following extension:
extdiff command to allow external programs to compare revisions
(use 'hg help extensions' for information on enabling extensions)
[10]
$ echo "[extensions]" >> ../source/.hg/hgrc
$ echo "extdiff=" >> ../source/.hg/hgrc
$ hg debugextensions -R ../source
extdiff
share
$ hg extdiff -R ../source -p echo
BROKEN: the command below will not work if config of shared source is not loaded
on dispatch but debugextensions says that extension
is loaded
$ hg debugextensions
extdiff
share
$ hg extdiff -p echo
However, local .hg/hgrc should override the config set by share source
$ echo "[ui]" >> .hg/hgrc
$ echo "curses=false" >> .hg/hgrc
$ hg showconfig ui.curses
false
$ HGEDITOR=cat hg config --shared
[ui]
curses=true
[extensions]
extdiff=
$ HGEDITOR=cat hg config --local
[ui]
curses=false
Testing that hooks set in source repository also runs in shared repo
$ cd ../source
$ cat <<EOF >> .hg/hgrc
> [extensions]
> hooklib=
> [hooks]
> pretxnchangegroup.reject_merge_commits = \
> python:hgext.hooklib.reject_merge_commits.hook
> EOF
$ cd ..
$ hg clone source cloned
updating to branch default
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd cloned
$ hg up 0
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ echo bar > bar
$ hg ci -Aqm "added bar"
$ hg merge
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m "merge commit"
$ hg push ../source
pushing to ../source
searching for changes
adding changesets
adding manifests
adding file changes
error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
transaction abort!
rollback completed
abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
[255]
$ hg push ../shared1
pushing to ../shared1
searching for changes
adding changesets
adding manifests
adding file changes
error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
transaction abort!
rollback completed
abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
[255]
Test that if share source config is untrusted, we dont read it
$ cd ../shared1
$ cat << EOF > $TESTTMP/untrusted.py
> from mercurial import scmutil, util
> def uisetup(ui):
> class untrustedui(ui.__class__):
> def _trusted(self, fp, f):
> if util.normpath(fp.name).endswith(b'source/.hg/hgrc'):
> return False
> return super(untrustedui, self)._trusted(fp, f)
> ui.__class__ = untrustedui
> EOF
$ hg showconfig hooks
hooks.pretxnchangegroup.reject_merge_commits=python:hgext.hooklib.reject_merge_commits.hook
$ hg showconfig hooks --config extensions.untrusted=$TESTTMP/untrusted.py
[1]
Update the source repository format and check that shared repo works
$ cd ../source
Disable zstd related tests because its not present on pure version
#if zstd
$ echo "[format]" >> .hg/hgrc
$ echo "revlog-compression=zstd" >> .hg/hgrc
$ hg debugupgraderepo --run -q
upgrade will perform the following actions:
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (dirstate-v2 !)
added: revlog-compression-zstd
processed revlogs:
- all-filelogs
- changelog
- manifest
$ hg log -r .
changeset: 1:5f6d8a4bf34a
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: added b
#endif
$ echo "[format]" >> .hg/hgrc
$ echo "use-persistent-nodemap=True" >> .hg/hgrc
$ hg debugupgraderepo --run -q -R ../shared1
abort: cannot use these actions on a share repository: persistent-nodemap
(upgrade the main repository directly)
[255]
$ hg debugupgraderepo --run -q
upgrade will perform the following actions:
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-zstd no-dirstate-v2 !)
preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, share-safe, sparserevlog, store (zstd no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-zstd dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, share-safe, sparserevlog, store (zstd dirstate-v2 !)
added: persistent-nodemap
processed revlogs:
- all-filelogs
- changelog
- manifest
$ hg log -r .
changeset: 1:5f6d8a4bf34a
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: added b
Shared one should work
$ cd ../shared1
$ hg log -r .
changeset: 2:155349b645be
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: added c
Testing that nonsharedrc is loaded for source and not shared
$ cd ../source
$ touch .hg/hgrc-not-shared
$ echo "[ui]" >> .hg/hgrc-not-shared
$ echo "traceback=true" >> .hg/hgrc-not-shared
$ hg showconfig ui.traceback
true
$ HGEDITOR=cat hg config --non-shared
[ui]
traceback=true
$ cd ../shared1
$ hg showconfig ui.traceback
[1]
Unsharing works
$ hg unshare
Test that source config is added to the shared one after unshare, and the config
of current repo is still respected over the config which came from source config
$ cd ../cloned
$ hg push ../shared1
pushing to ../shared1
searching for changes
adding changesets
adding manifests
adding file changes
error: pretxnchangegroup.reject_merge_commits hook failed: bcde3522682d rejected as merge on the same branch. Please consider rebase.
transaction abort!
rollback completed
abort: bcde3522682d rejected as merge on the same branch. Please consider rebase.
[255]
$ hg showconfig ui.curses -R ../shared1
false
$ cd ../
Test that upgrading using debugupgraderepo works
=================================================
$ hg init non-share-safe --config format.use-share-safe=false
$ cd non-share-safe
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
sparserevlog
store
$ echo foo > foo
$ hg ci -Aqm 'added foo'
$ echo bar > bar
$ hg ci -Aqm 'added bar'
Create a share before upgrading
$ cd ..
$ hg share non-share-safe nss-share
updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugrequirements -R nss-share
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
shared
sparserevlog
store
$ cd non-share-safe
Upgrade
$ hg debugupgraderepo -q
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe
no revlogs to process
$ hg debugupgraderepo --run
upgrade will perform the following actions:
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe
share-safe
Upgrades a repository to share-safe format so that future shares of this repository share its requirements and configs.
no revlogs to process
beginning upgrade...
repository locked and read-only
creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
(it is safe to interrupt this process any time before data migration completes)
upgrading repository requirements
removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
share-safe
sparserevlog
store
$ cat .hg/requires
dirstate-v2 (dirstate-v2 !)
share-safe
$ cat .hg/store/requires
dotencode
fncache
generaldelta
revlogv1
sparserevlog
store
$ hg log -GT "{node}: {desc}\n"
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
Make sure existing shares dont work with default config
$ hg log -GT "{node}: {desc}\n" -R ../nss-share
abort: version mismatch: source uses share-safe functionality while the current share does not
(see `hg help config.format.use-share-safe` for more information)
[255]
Create a safe share from upgrade one
$ cd ..
$ hg share non-share-safe ss-share
updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ss-share
$ hg log -GT "{node}: {desc}\n"
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ cd ../non-share-safe
Test that downgrading works too
$ cat >> $HGRCPATH <<EOF
> [extensions]
> share =
> [format]
> use-share-safe = False
> EOF
$ hg debugupgraderepo -q
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
removed: share-safe
no revlogs to process
$ hg debugupgraderepo --run
upgrade will perform the following actions:
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
removed: share-safe
no revlogs to process
beginning upgrade...
repository locked and read-only
creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
(it is safe to interrupt this process any time before data migration completes)
upgrading repository requirements
removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared.
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
sparserevlog
store
$ cat .hg/requires
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
sparserevlog
store
$ test -f .hg/store/requires
[1]
$ hg log -GT "{node}: {desc}\n"
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
Make sure existing shares still works
$ hg log -GT "{node}: {desc}\n" -R ../nss-share
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ hg log -GT "{node}: {desc}\n" -R ../ss-share
abort: share source does not support share-safe requirement
(see `hg help config.format.use-share-safe` for more information)
[255]
Testing automatic downgrade of shares when config is set
$ touch ../ss-share/.hg/wlock
$ hg log -GT "{node}: {desc}\n" -R ../ss-share --config share.safe-mismatch.source-not-safe=downgrade-abort
abort: failed to downgrade share, got error: Lock held
(see `hg help config.format.use-share-safe` for more information)
[255]
$ rm ../ss-share/.hg/wlock
$ cp -R ../ss-share ../ss-share-bck
$ hg log -GT "{node}: {desc}\n" -R ../ss-share --config share.safe-mismatch.source-not-safe=downgrade-abort
repository downgraded to not use share-safe mode
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ rm -rf ../ss-share
$ mv ../ss-share-bck ../ss-share
$ hg log -GT "{node}: {desc}\n" -R ../ss-share --config share.safe-mismatch.source-not-safe=downgrade-abort --config share.safe-mismatch.source-not-safe:verbose-upgrade=no
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ hg log -GT "{node}: {desc}\n" -R ../ss-share
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
Testing automatic upgrade of shares when config is set
$ hg debugupgraderepo -q --run --config format.use-share-safe=True
upgrade will perform the following actions:
requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, use-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe
no revlogs to process
repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
$ hg debugrequirements
dotencode
dirstate-v2 (dirstate-v2 !)
fncache
generaldelta
revlogv1
share-safe
sparserevlog
store
$ hg log -GT "{node}: {desc}\n" -R ../nss-share
abort: version mismatch: source uses share-safe functionality while the current share does not
(see `hg help config.format.use-share-safe` for more information)
[255]
Check that if lock is taken, upgrade fails but read operation are successful
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgra
abort: share-safe mismatch with source.
Unrecognized value 'upgra' of `share.safe-mismatch.source-safe` set.
(see `hg help config.format.use-share-safe` for more information)
[255]
$ touch ../nss-share/.hg/wlock
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgrade-allow
failed to upgrade share, got error: Lock held
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgrade-allow --config share.safe-mismatch.source-safe.warn=False
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgrade-abort
abort: failed to upgrade share, got error: Lock held
(see `hg help config.format.use-share-safe` for more information)
[255]
$ rm ../nss-share/.hg/wlock
$ cp -R ../nss-share ../nss-share-bck
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgrade-abort
repository upgraded to use share-safe mode
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
$ rm -rf ../nss-share
$ mv ../nss-share-bck ../nss-share
$ hg log -GT "{node}: {desc}\n" -R ../nss-share --config share.safe-mismatch.source-safe=upgrade-abort --config share.safe-mismatch.source-safe:verbose-upgrade=no
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
Test that unshare works
$ hg unshare -R ../nss-share
$ hg log -GT "{node}: {desc}\n" -R ../nss-share
@ f63db81e6dde1d9c78814167f77fb1fb49283f4f: added bar
|
o f3ba8b99bb6f897c87bbc1c07b75c6ddf43a4f77: added foo
Test automatique upgrade/downgrade of main-repository
------------------------------------------------------
create an initial repository
$ hg init auto-upgrade \
> --config format.use-share-safe=no
$ hg debugbuilddag -R auto-upgrade --new-file .+5
$ hg -R auto-upgrade update
6 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugformat -R auto-upgrade | grep share-safe
share-safe: no
upgrade it to share-safe automatically
$ hg status -R auto-upgrade \
> --config format.use-share-safe.automatic-upgrade-of-mismatching-repositories=yes \
> --config format.use-share-safe=yes
automatically upgrading repository to the `share-safe` feature
(see `hg help config.format.use-share-safe` for details)
$ hg debugformat -R auto-upgrade | grep share-safe
share-safe: yes
downgrade it from share-safe automatically
$ hg status -R auto-upgrade \
> --config format.use-share-safe.automatic-upgrade-of-mismatching-repositories=yes \
> --config format.use-share-safe=no
automatically downgrading repository from the `share-safe` feature
(see `hg help config.format.use-share-safe` for details)
$ hg debugformat -R auto-upgrade | grep share-safe
share-safe: no