delta-find: split the "sparse" part of `_pre_filter_rev` in a method
Since `_pre_filter_rev` contains logic from various sources of constraint, we
start splitting is in subfunction to clarify and document the grouping.
This file contains tests case that deal with format change accross stream clone
#require serve no-reposimplestore no-chg
#testcases stream-legacy stream-bundle2
$ cat << EOF >> $HGRCPATH
> [storage]
> revlog.persistent-nodemap.slow-path=allow
> EOF
#if stream-legacy
$ cat << EOF >> $HGRCPATH
> [server]
> bundle2.stream = no
> EOF
#endif
Initialize repository
$ hg init server --config format.use-share-safe=yes --config format.use-persistent-nodemap=yes
$ cd server
$ sh $TESTDIR/testlib/stream_clone_setup.sh
adding 00changelog-ab349180a0405010.nd
adding 00changelog.d
adding 00changelog.i
adding 00changelog.n
adding 00manifest.d
adding 00manifest.i
adding container/isam-build-centos7/bazel-coverage-generator-sandboxfs-compatibility-0758e3e4f6057904d44399bd666faba9e7f40686.patch
adding data/foo.d
adding data/foo.i
adding data/foo.n
adding data/undo.babar
adding data/undo.d
adding data/undo.foo.d
adding data/undo.foo.i
adding data/undo.foo.n
adding data/undo.i
adding data/undo.n
adding data/undo.py
adding foo.d
adding foo.i
adding foo.n
adding meta/foo.d
adding meta/foo.i
adding meta/foo.n
adding meta/undo.babar
adding meta/undo.d
adding meta/undo.foo.d
adding meta/undo.foo.i
adding meta/undo.foo.n
adding meta/undo.i
adding meta/undo.n
adding meta/undo.py
adding savanah/foo.d
adding savanah/foo.i
adding savanah/foo.n
adding savanah/undo.babar
adding savanah/undo.d
adding savanah/undo.foo.d
adding savanah/undo.foo.i
adding savanah/undo.foo.n
adding savanah/undo.i
adding savanah/undo.n
adding savanah/undo.py
adding store/C\xc3\xa9lesteVille_is_a_Capital_City (esc)
adding store/foo.d
adding store/foo.i
adding store/foo.n
adding store/undo.babar
adding store/undo.d
adding store/undo.foo.d
adding store/undo.foo.i
adding store/undo.foo.n
adding store/undo.i
adding store/undo.n
adding store/undo.py
adding undo.babar
adding undo.d
adding undo.foo.d
adding undo.foo.i
adding undo.foo.n
adding undo.i
adding undo.n
adding undo.py
$ hg debugbuilddag .+5000 --from-existing
$ ls -1 .hg/store/00changelog*
.hg/store/00changelog-*.nd (glob)
.hg/store/00changelog.d
.hg/store/00changelog.i
.hg/store/00changelog.n
$ cd ..
#if no-windows
Test streaming from/to repository without a store:
==================================================
This is skipped Windows needs dot-encode to handle some of the file in this
tests, and dot-encode need the store enabled.
$ hg clone --pull --config format.usestore=no server server-no-store
requesting all changes
adding changesets
adding manifests
adding file changes
added 5004 changesets with 1088 changes to 1088 files (+1 heads)
new changesets 96ee1d7354c4:06ddac466af5
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R server-no-store -q
$ hg -R server serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg -R server-no-store serve -p $HGPORT2 -d --pid-file=hg-2.pid --error errors-2.txt
$ cat hg-2.pid >> $DAEMON_PIDS
$ hg debugrequires -R server | grep store
store
$ hg debugrequires -R server-no-store | grep store
[1]
store → no-store cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-remove-store --config format.usestore=no
$ cat errors-1.txt
$ hg -R clone-remove-store verify -q
$ hg debugrequires -R clone-remove-store | grep store
[1]
no-store → store cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT2 clone-add-store --config format.usestore=yes
$ cat errors-2.txt
$ hg -R clone-add-store verify -q
$ hg debugrequires -R clone-add-store | grep store
store
$ killdaemons.py
$ rm hg-*.pid errors-*.txt
#endif
Test streaming from/to repository without a fncache
===================================================
$ hg clone --pull --config format.usefncache=no server server-no-fncache
requesting all changes
adding changesets
adding manifests
adding file changes
added 5004 changesets with 1088 changes to 1088 files (+1 heads)
new changesets 96ee1d7354c4:06ddac466af5
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R server-no-fncache -q
$ hg -R server serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg -R server-no-fncache serve -p $HGPORT2 -d --pid-file=hg-2.pid --error errors-2.txt
$ cat hg-2.pid >> $DAEMON_PIDS
$ hg debugrequires -R server | grep fncache
fncache
$ hg debugrequires -R server-no-fncache | grep fncache
[1]
fncache → no-fncache cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-remove-fncache --config format.usefncache=no
$ cat errors-1.txt
$ hg -R clone-remove-fncache verify -q
$ hg debugrequires -R clone-remove-fncache | grep fncache
[1]
no-fncache → fncache cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT2 clone-add-fncache --config format.usefncache=yes
$ cat errors-2.txt
$ hg -R clone-add-fncache verify -q
$ hg debugrequires -R clone-add-fncache | grep fncache
fncache
$ killdaemons.py
Test streaming from/to repository without a dotencode
===================================================
$ rm hg-*.pid errors-*.txt
$ hg clone --pull --config format.dotencode=no server server-no-dotencode
requesting all changes
adding changesets
adding manifests
adding file changes
added 5004 changesets with 1088 changes to 1088 files (+1 heads)
new changesets 96ee1d7354c4:06ddac466af5
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R server-no-dotencode -q
$ hg -R server serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg -R server-no-dotencode serve -p $HGPORT2 -d --pid-file=hg-2.pid --error errors-2.txt
$ cat hg-2.pid >> $DAEMON_PIDS
$ hg debugrequires -R server | grep dotencode
dotencode
$ hg debugrequires -R server-no-dotencode | grep dotencode
[1]
dotencode → no-dotencode cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-remove-dotencode --config format.dotencode=no
$ cat errors-1.txt
$ hg -R clone-remove-dotencode verify -q
$ hg debugrequires -R clone-remove-dotencode | grep dotencode
[1]
no-dotencode → dotencode cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT2 clone-add-dotencode --config format.dotencode=yes
$ cat errors-2.txt
$ hg -R clone-add-dotencode verify -q
$ hg debugrequires -R clone-add-dotencode | grep dotencode
dotencode
$ killdaemons.py
Cloning from a share
--------------------
We should be able to clone from a "share" repository, it will use the source store for streaming.
The resulting clone should not use share.
$ rm hg-*.pid errors-*.txt
$ hg share --config extensions.share= server server-share -U
$ hg -R server-share serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-from-share
$ hg -R clone-from-share verify -q
$ hg debugrequires -R clone-from-share | grep -E 'share$'
[1]
$ killdaemons.py
Test streaming from/to repository without a share-safe
======================================================
$ rm hg-*.pid errors-*.txt
$ hg clone --pull --config format.use-share-safe=no server server-no-share-safe
requesting all changes
adding changesets
adding manifests
adding file changes
added 5004 changesets with 1088 changes to 1088 files (+1 heads)
new changesets 96ee1d7354c4:06ddac466af5
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R server-no-share-safe -q
$ hg -R server serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg -R server-no-share-safe serve -p $HGPORT2 -d --pid-file=hg-2.pid --error errors-2.txt
$ cat hg-2.pid >> $DAEMON_PIDS
$ hg debugrequires -R server | grep share-safe
share-safe
$ hg debugrequires -R server-no-share-safe | grep share-safe
[1]
share-safe → no-share-safe cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-remove-share-safe --config format.use-share-safe=no
$ cat errors-1.txt
$ hg -R clone-remove-share-safe verify -q
$ hg debugrequires -R clone-remove-share-safe | grep share-safe
[1]
no-share-safe → share-safe cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT2 clone-add-share-safe --config format.use-share-safe=yes
$ cat errors-2.txt
$ hg -R clone-add-share-safe verify -q
$ hg debugrequires -R clone-add-share-safe | grep share-safe
share-safe
$ killdaemons.py
Test streaming from/to repository without a persistent-nodemap
==============================================================
persistent nodemap affects revlog, but they are easy to generate locally, so we allow it to be changed over a stream clone
$ rm hg-*.pid errors-*.txt
$ hg clone --pull --config format.use-persistent-nodemap=no server server-no-persistent-nodemap
requesting all changes
adding changesets
adding manifests
adding file changes
added 5004 changesets with 1088 changes to 1088 files (+1 heads)
new changesets 96ee1d7354c4:06ddac466af5
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R server-no-persistent-nodemap -q
$ hg -R server serve -p $HGPORT -d --pid-file=hg-1.pid --error errors-1.txt
$ cat hg-1.pid > $DAEMON_PIDS
$ hg -R server-no-persistent-nodemap serve -p $HGPORT2 -d --pid-file=hg-2.pid --error errors-2.txt
$ cat hg-2.pid >> $DAEMON_PIDS
$ hg debugrequires -R server | grep persistent-nodemap
persistent-nodemap
$ hg debugrequires -R server-no-persistent-nodemap | grep persistent-nodemap
[1]
$ ls -1 server/.hg/store/00changelog*
server/.hg/store/00changelog-*.nd (glob)
server/.hg/store/00changelog.d
server/.hg/store/00changelog.i
server/.hg/store/00changelog.n
$ ls -1 server-no-persistent-nodemap/.hg/store/00changelog*
server-no-persistent-nodemap/.hg/store/00changelog.d
server-no-persistent-nodemap/.hg/store/00changelog.i
persistent-nodemap → no-persistent-nodemap cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT clone-remove-persistent-nodemap --config format.use-persistent-nodemap=no
$ cat errors-1.txt
$ hg -R clone-remove-persistent-nodemap verify -q
$ hg debugrequires -R clone-remove-persistent-nodemap | grep persistent-nodemap
[1]
The persistent-nodemap files should no longer exists
$ ls -1 clone-remove-persistent-nodemap/.hg/store/00changelog*
clone-remove-persistent-nodemap/.hg/store/00changelog.d
clone-remove-persistent-nodemap/.hg/store/00changelog.i
no-persistent-nodemap → persistent-nodemap cloning
$ hg clone --quiet --stream -U http://localhost:$HGPORT2 clone-add-persistent-nodemap --config format.use-persistent-nodemap=yes
$ cat errors-2.txt
$ hg -R clone-add-persistent-nodemap verify -q
$ hg debugrequires -R clone-add-persistent-nodemap | grep persistent-nodemap
persistent-nodemap
The persistent-nodemap files should exists
$ ls -1 clone-add-persistent-nodemap/.hg/store/00changelog*
clone-add-persistent-nodemap/.hg/store/00changelog-*.nd (glob)
clone-add-persistent-nodemap/.hg/store/00changelog.d
clone-add-persistent-nodemap/.hg/store/00changelog.i
clone-add-persistent-nodemap/.hg/store/00changelog.n
$ killdaemons.py