color: turn 'ui.color' into a boolean (auto or off)
Previously, 'ui.color=yes' meant "always show color", While
"ui.color=auto" meant "use color automatically when it appears
sensible".
This feels problematic to some people because if an administrator has
disabled color with "ui.color=off", and a user turn it back on using
"color=on", it will get surprised (because it breaks their output when
redirected to a file.) This patch changes ui.color=true to only move the
default value of --color from "never" to "auto".
I'm not really in favor of this changes as I suspect the above case will
be pretty rare and I would rather keep the logic simpler. However, I'm
providing this patch to help the 4.2 release in the case were others
decide to make this changes.
Users that want to force colors without specifying --color on the
command line can use the 'ui.formatted' config knob, which had to be
enabled in a handful of tests for this patch.
Nice summary table (credit: Augie Fackler)
That is, before this patch:
+--------------------+--------------------+--------------------+
| | not a tty | a tty |
| | --color not set | --color not set |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color (not set) | no color | no color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = auto | no color | color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = yes | *color* | color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = no | no color | no color |
| | | |
+--------------------+--------------------+--------------------+
(if --color is specified, it always clobbers the setting in [ui])
and after this patch:
+--------------------+--------------------+--------------------+
| | not a tty | a tty |
| | --color not set | --color not set |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color (not set) | no color | no color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = auto | no color | color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = yes | *no color* | color |
| | | |
+--------------------+--------------------+--------------------+
| [ui] | | |
| color = no | no color | no color |
| | | |
+--------------------+--------------------+--------------------+
(if --color is specified, it always clobbers the setting in [ui])
#require killdaemons
$ hg clone http://localhost:$HGPORT/ copy
abort: * (glob)
[255]
$ test -d copy
[1]
This server doesn't do range requests so it's basically only good for
one pull
$ python "$TESTDIR/dumbhttp.py" -p $HGPORT --pid dumb.pid
$ cat dumb.pid >> $DAEMON_PIDS
$ hg init remote
$ cd remote
$ echo foo > bar
$ echo c2 > '.dotfile with spaces'
$ hg add
adding .dotfile with spaces
adding bar
$ hg commit -m"test"
$ hg tip
changeset: 0:02770d679fb8
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: test
$ cd ..
$ hg clone static-http://localhost:$HGPORT/remote local
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd local
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
2 files, 1 changesets, 2 total revisions
$ cat bar
foo
$ cd ../remote
$ echo baz > quux
$ hg commit -A -mtest2
adding quux
check for HTTP opener failures when cachefile does not exist
$ rm .hg/cache/*
$ cd ../local
$ cat >> .hg/hgrc <<EOF
> [hooks]
> changegroup = sh -c "printenv.py changegroup"
> EOF
$ hg pull
pulling from static-http://localhost:$HGPORT/remote
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_NODE_LAST=4ac2e3648604439c580c69b09ec9d93a88d93432 HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_URL=http://localhost:$HGPORT/remote
(run 'hg update' to get a working copy)
trying to push
$ hg update
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo more foo >> bar
$ hg commit -m"test"
$ hg push
pushing to static-http://localhost:$HGPORT/remote
abort: destination does not support push
[255]
trying clone -r
$ cd ..
$ hg clone -r doesnotexist static-http://localhost:$HGPORT/remote local0
abort: unknown revision 'doesnotexist'!
[255]
$ hg clone -r 0 static-http://localhost:$HGPORT/remote local0
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
test with "/" URI (issue747) and subrepo
$ hg init
$ hg init sub
$ touch sub/test
$ hg -R sub commit -A -m "test"
adding test
$ hg -R sub tag not-empty
$ echo sub=sub > .hgsub
$ echo a > a
$ hg add a .hgsub
$ hg -q ci -ma
$ hg clone static-http://localhost:$HGPORT/ local2
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 3 changes to 3 files
updating to branch default
cloning subrepo sub from static-http://localhost:$HGPORT/sub
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 2 changes to 2 files
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd local2
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
3 files, 1 changesets, 3 total revisions
checking subrepo links
$ cat a
a
$ hg paths
default = static-http://localhost:$HGPORT/
test with empty repo (issue965)
$ cd ..
$ hg init remotempty
$ hg clone static-http://localhost:$HGPORT/remotempty local3
no changes found
updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd local3
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
0 files, 0 changesets, 0 total revisions
$ hg paths
default = static-http://localhost:$HGPORT/remotempty
test with non-repo
$ cd ..
$ mkdir notarepo
$ hg clone static-http://localhost:$HGPORT/notarepo local3
abort: 'http://localhost:$HGPORT/notarepo' does not appear to be an hg repository!
[255]
$ killdaemons.py