view mercurial/dagutil.py @ 29847:9a9629b9416c stable

bundle2: fail faster when interrupted

Before this patch, bundle2 application attempted to consume remaining
bundle2 part data when the process is interrupted (SIGINT) or when
sys.exit is called (translated into a SystemExit exception). This
meant that if one of these occurred when applying a say 1 GB
changegroup bundle2 part being downloaded over a network, it may take
Mercurial *several minutes* to terminate after a SIGINT because the
process is waiting on the network to stream megabytes of data. This is
not a great user experience and a regression from bundle1. Furthermore,
many process supervisors tend to only give processes a finite amount of
time to exit after delivering SIGINT: if processes take too long to
self-terminate, a SIGKILL is issued and Mercurial has no opportunity to
clean up. This would mean orphaned locks and transactions. Not good.

This patch changes the bundle2 application behavior to fail faster
when an interrupt or system exit is requested. It does so by not
catching BaseException (which includes KeyboardInterrupt and
SystemExit) and by explicitly checking for these conditions in
yet another handler which would also seek to the end of the current
bundle2 part on failure.

The end result of this patch is that SIGINT is now reacted to
significantly faster: the active transaction is rolled back
immediately without waiting for incoming bundle2 data to be consumed.
This restores the pre-bundle2 behavior and makes Mercurial treat
signals with the urgency they deserve.

# dagutil.py - dag utilities for mercurial
#
# Copyright 2010 Benoit Boissinot <[e-mail]>
# and Peter Arrenbrecht <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

from .i18n import _
from .node import nullrev

class basedag(object):
    '''generic interface for DAGs

    terms:
    "ix" (short for index) identifies a nodes internally,
    "id" identifies one externally.

    All params are ixs unless explicitly suffixed otherwise.
    Pluralized params are lists or sets.
    '''

    def __init__(self):
        self._inverse = None

    def nodeset(self):
        '''set of all node ixs'''
        raise NotImplementedError

    def heads(self):
        '''list of head ixs'''
        raise NotImplementedError

    def parents(self, ix):
        '''list of parents ixs of ix'''
        raise NotImplementedError

    def inverse(self):
        '''inverse DAG, where parents becomes children, etc.'''
        raise NotImplementedError

    def ancestorset(self, starts, stops=None):
        '''
        set of all ancestors of starts (incl), but stop walk at stops (excl)
        '''
        raise NotImplementedError

    def descendantset(self, starts, stops=None):
        '''
        set of all descendants of starts (incl), but stop walk at stops (excl)
        '''
        return self.inverse().ancestorset(starts, stops)

    def headsetofconnecteds(self, ixs):
        '''
        subset of connected list of ixs so that no node has a descendant in it

        By "connected list" we mean that if an ancestor and a descendant are in
        the list, then so is at least one path connecting them.
        '''
        raise NotImplementedError

    def externalize(self, ix):
        '''return a node id'''
        return self._externalize(ix)

    def externalizeall(self, ixs):
        '''return a list of (or set if given a set) of node ids'''
        ids = self._externalizeall(ixs)
        if isinstance(ixs, set):
            return set(ids)
        return list(ids)

    def internalize(self, id):
        '''return a node ix'''
        return self._internalize(id)

    def internalizeall(self, ids, filterunknown=False):
        '''return a list of (or set if given a set) of node ixs'''
        ixs = self._internalizeall(ids, filterunknown)
        if isinstance(ids, set):
            return set(ixs)
        return list(ixs)


class genericdag(basedag):
    '''generic implementations for DAGs'''

    def ancestorset(self, starts, stops=None):
        if stops:
            stops = set(stops)
        else:
            stops = set()
        seen = set()
        pending = list(starts)
        while pending:
            n = pending.pop()
            if n not in seen and n not in stops:
                seen.add(n)
                pending.extend(self.parents(n))
        return seen

    def headsetofconnecteds(self, ixs):
        hds = set(ixs)
        if not hds:
            return hds
        for n in ixs:
            for p in self.parents(n):
                hds.discard(p)
        assert hds
        return hds


class revlogbaseddag(basedag):
    '''generic dag interface to a revlog'''

    def __init__(self, revlog, nodeset):
        basedag.__init__(self)
        self._revlog = revlog
        self._heads = None
        self._nodeset = nodeset

    def nodeset(self):
        return self._nodeset

    def heads(self):
        if self._heads is None:
            self._heads = self._getheads()
        return self._heads

    def _externalize(self, ix):
        return self._revlog.index[ix][7]
    def _externalizeall(self, ixs):
        idx = self._revlog.index
        return [idx[i][7] for i in ixs]

    def _internalize(self, id):
        ix = self._revlog.rev(id)
        if ix == nullrev:
            raise LookupError(id, self._revlog.indexfile, _('nullid'))
        return ix
    def _internalizeall(self, ids, filterunknown):
        rl = self._revlog
        if filterunknown:
            return [r for r in map(rl.nodemap.get, ids)
                    if (r is not None
                        and r != nullrev
                        and r not in rl.filteredrevs)]
        return map(self._internalize, ids)


class revlogdag(revlogbaseddag):
    '''dag interface to a revlog'''

    def __init__(self, revlog):
        revlogbaseddag.__init__(self, revlog, set(revlog))

    def _getheads(self):
        return [r for r in self._revlog.headrevs() if r != nullrev]

    def parents(self, ix):
        rlog = self._revlog
        idx = rlog.index
        revdata = idx[ix]
        prev = revdata[5]
        if prev != nullrev:
            prev2 = revdata[6]
            if prev2 == nullrev:
                return [prev]
            return [prev, prev2]
        prev2 = revdata[6]
        if prev2 != nullrev:
            return [prev2]
        return []

    def inverse(self):
        if self._inverse is None:
            self._inverse = inverserevlogdag(self)
        return self._inverse

    def ancestorset(self, starts, stops=None):
        rlog = self._revlog
        idx = rlog.index
        if stops:
            stops = set(stops)
        else:
            stops = set()
        seen = set()
        pending = list(starts)
        while pending:
            rev = pending.pop()
            if rev not in seen and rev not in stops:
                seen.add(rev)
                revdata = idx[rev]
                for i in [5, 6]:
                    prev = revdata[i]
                    if prev != nullrev:
                        pending.append(prev)
        return seen

    def headsetofconnecteds(self, ixs):
        if not ixs:
            return set()
        rlog = self._revlog
        idx = rlog.index
        headrevs = set(ixs)
        for rev in ixs:
            revdata = idx[rev]
            for i in [5, 6]:
                prev = revdata[i]
                if prev != nullrev:
                    headrevs.discard(prev)
        assert headrevs
        return headrevs

    def linearize(self, ixs):
        '''linearize and topologically sort a list of revisions

        The linearization process tries to create long runs of revs where
        a child rev comes immediately after its first parent. This is done by
        visiting the heads of the given revs in inverse topological order,
        and for each visited rev, visiting its second parent, then its first
        parent, then adding the rev itself to the output list.
        '''
        sorted = []
        visit = list(self.headsetofconnecteds(ixs))
        visit.sort(reverse=True)
        finished = set()

        while visit:
            cur = visit.pop()
            if cur < 0:
                cur = -cur - 1
                if cur not in finished:
                    sorted.append(cur)
                    finished.add(cur)
            else:
                visit.append(-cur - 1)
                visit += [p for p in self.parents(cur)
                          if p in ixs and p not in finished]
        assert len(sorted) == len(ixs)
        return sorted


class inverserevlogdag(revlogbaseddag, genericdag):
    '''inverse of an existing revlog dag; see revlogdag.inverse()'''

    def __init__(self, orig):
        revlogbaseddag.__init__(self, orig._revlog, orig._nodeset)
        self._orig = orig
        self._children = {}
        self._roots = []
        self._walkfrom = len(self._revlog) - 1

    def _walkto(self, walkto):
        rev = self._walkfrom
        cs = self._children
        roots = self._roots
        idx = self._revlog.index
        while rev >= walkto:
            data = idx[rev]
            isroot = True
            for prev in [data[5], data[6]]: # parent revs
                if prev != nullrev:
                    cs.setdefault(prev, []).append(rev)
                    isroot = False
            if isroot:
                roots.append(rev)
            rev -= 1
        self._walkfrom = rev

    def _getheads(self):
        self._walkto(nullrev)
        return self._roots

    def parents(self, ix):
        if ix is None:
            return []
        if ix <= self._walkfrom:
            self._walkto(ix)
        return self._children.get(ix, [])

    def inverse(self):
        return self._orig