Mercurial > hg
view tests/test-status.t @ 26000:9ac4e81b9659 stable
match: fix a caseonly rename + explicit path commit on icasefs (issue4768)
The problem was that the former name and the new name are both normalized to the
case in dirstate, so matcher._files would be ['ABC.txt', 'ABC.txt'].
localrepo.commit() calls localrepo.status(), passing along the matcher. Inside
dirstate.status(), _walkexplicit() simply grabs matcher.files() and processes
those items. Since the old name isn't present, it is silently dropped. There's
a fundamental tension here, because the status command should also accept files
that don't match the filesystem, so we can't drop the normalization in status.
The problem originated in baa11dde8c0e.
Unfortunately with this change, the case of the old file must still be specified
exactly, or the old file is again silently excluded. I went back to
baa11dde8c0e^, and that had the same behavior, so we are no worse off. I'm open
to ideas from a matcher or dirstate expert on how to fix that half.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Thu, 06 Aug 2015 21:00:16 -0400 |
parents | e8075329c5fb |
children | 369c8f9453c2 |
line wrap: on
line source
$ hg init repo1 $ cd repo1 $ mkdir a b a/1 b/1 b/2 $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2 hg status in repo root: $ hg status ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root hg status . in repo root: $ hg status . ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a . ? 1/in_a_1 ? in_a $ hg status --cwd a .. ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd b ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b . ? 1/in_b_1 ? 2/in_b_2 ? in_b $ hg status --cwd b .. ? ../a/1/in_a_1 ? ../a/in_a ? 1/in_b_1 ? 2/in_b_2 ? in_b ? ../in_root $ hg status --cwd a/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a/1 . ? in_a_1 $ hg status --cwd a/1 .. ? in_a_1 ? ../in_a $ hg status --cwd b/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/1 . ? in_b_1 $ hg status --cwd b/1 .. ? in_b_1 ? ../2/in_b_2 ? ../in_b $ hg status --cwd b/2 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/2 . ? in_b_2 $ hg status --cwd b/2 .. ? ../1/in_b_1 ? in_b_2 ? ../in_b combining patterns with root and patterns without a root works $ hg st a/in_a re:.*b$ ? a/in_a ? b/in_b $ cd .. $ hg init repo2 $ cd repo2 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg ci -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch modified added unknown ignored $ hg add added $ hg remove removed $ rm deleted hg status: $ hg status A added R removed ! deleted ? unknown hg status modified added removed deleted unknown never-existed ignored: $ hg status modified added removed deleted unknown never-existed ignored never-existed: * (glob) A added R removed ! deleted ? unknown $ hg copy modified copied hg status -C: $ hg status -C A added A copied modified R removed ! deleted ? unknown hg status -A: $ hg status -A A added A copied modified R removed ! deleted ? unknown I ignored C .hgignore C modified $ hg status -A -Tjson [ { "path": "added", "status": "A" }, { "copy": "modified", "path": "copied", "status": "A" }, { "path": "removed", "status": "R" }, { "path": "deleted", "status": "!" }, { "path": "unknown", "status": "?" }, { "path": "ignored", "status": "I" }, { "path": ".hgignore", "status": "C" }, { "path": "modified", "status": "C" } ] $ hg status -A -Tpickle > pickle >>> import pickle >>> print sorted((x['status'], x['path']) for x in pickle.load(open("pickle"))) [('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')] $ rm pickle $ echo "^ignoreddir$" > .hgignore $ mkdir ignoreddir $ touch ignoreddir/file Test templater support: $ hg status -AT "[{status}]\t{if(copy, '{copy} -> ')}{path}\n" [M] .hgignore [A] added [A] modified -> copied [R] removed [!] deleted [?] ignored [?] unknown [I] ignoreddir/file [C] modified $ hg status -AT default M .hgignore A added A copied modified R removed ! deleted ? ignored ? unknown I ignoreddir/file C modified $ hg status -T compact abort: "status" not in template map [255] hg status ignoreddir/file: $ hg status ignoreddir/file hg status -i ignoreddir/file: $ hg status -i ignoreddir/file I ignoreddir/file $ cd .. Check 'status -q' and some combinations $ hg init repo3 $ cd repo3 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg commit -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch added unknown ignored $ hg add added $ echo "test" >> modified $ hg remove removed $ rm deleted $ hg copy modified copied Specify working directory revision explicitly, that should be the same as "hg status" $ hg status --change "wdir()" M modified A added A copied R removed ! deleted ? unknown Run status with 2 different flags. Check if result is the same or different. If result is not as expected, raise error $ assert() { > hg status $1 > ../a > hg status $2 > ../b > if diff ../a ../b > /dev/null; then > out=0 > else > out=1 > fi > if [ $3 -eq 0 ]; then > df="same" > else > df="different" > fi > if [ $out -ne $3 ]; then > echo "Error on $1 and $2, should be $df." > fi > } Assert flag1 flag2 [0-same | 1-different] $ assert "-q" "-mard" 0 $ assert "-A" "-marduicC" 0 $ assert "-qA" "-mardcC" 0 $ assert "-qAui" "-A" 0 $ assert "-qAu" "-marducC" 0 $ assert "-qAi" "-mardicC" 0 $ assert "-qu" "-u" 0 $ assert "-q" "-u" 1 $ assert "-m" "-a" 1 $ assert "-r" "-d" 1 $ cd .. $ hg init repo4 $ cd repo4 $ touch modified removed deleted $ hg ci -q -A -m 'initial checkin' $ touch added unknown $ hg add added $ hg remove removed $ rm deleted $ echo x > modified $ hg copy modified copied $ hg ci -m 'test checkin' -d "1000001 0" $ rm * $ touch unrelated $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0" hg status --change 1: $ hg status --change 1 M modified A added A copied R removed hg status --change 1 unrelated: $ hg status --change 1 unrelated hg status -C --change 1 added modified copied removed deleted: $ hg status -C --change 1 added modified copied removed deleted M modified A added A copied modified R removed hg status -A --change 1 and revset: $ hg status -A --change '1|1' M modified A added A copied modified R removed C deleted $ cd .. hg status of binary file starting with '\1\n', a separator for metadata: $ hg init repo5 $ cd repo5 >>> open("010a", "wb").write("\1\nfoo") $ hg ci -q -A -m 'initial checkin' $ hg status -A C 010a >>> open("010a", "wb").write("\1\nbar") $ hg status -A M 010a $ hg ci -q -m 'modify 010a' $ hg status -A --rev 0:1 M 010a $ touch empty $ hg ci -q -A -m 'add another file' $ hg status -A --rev 1:2 010a C 010a $ cd .. test "hg status" with "directory pattern" which matches against files only known on target revision. $ hg init repo6 $ cd repo6 $ echo a > a.txt $ hg add a.txt $ hg commit -m '#0' $ mkdir -p 1/2/3/4/5 $ echo b > 1/2/3/4/5/b.txt $ hg add 1/2/3/4/5/b.txt $ hg commit -m '#1' $ hg update -C 0 > /dev/null $ hg status -A C a.txt the directory matching against specified pattern should be removed, because directory existence prevents 'dirstate.walk()' from showing warning message about such pattern. $ test ! -d 1 $ hg status -A --rev 1 1/2/3/4/5/b.txt R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3/4/5 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1 R 1/2/3/4/5/b.txt $ hg status --config ui.formatdebug=True --rev 1 1 status = [ {*'path': '1/2/3/4/5/b.txt'*}, (glob) ] #if windows $ hg --config ui.slash=false status -A --rev 1 1 R 1\2\3\4\5\b.txt #endif $ cd .. Status after move overwriting a file (issue4458) ================================================= $ hg init issue4458 $ cd issue4458 $ echo a > a $ echo b > b $ hg commit -Am base adding a adding b with --force $ hg mv b --force a $ hg st --copies M a b R b $ hg revert --all reverting a undeleting b $ rm *.orig without force $ hg rm a $ hg st --copies R a $ hg mv b a $ hg st --copies M a b R b using ui.statuscopies setting $ hg st --config ui.statuscopies=true M a b R b $ hg st --config ui.statuscopies=false M a R b Other "bug" highlight, the revision status does not report the copy information. This is buggy behavior. $ hg commit -m 'blah' $ hg st --copies --change . M a R b $ cd ..