py3: mask out None type when printing in `debuglocks`
Apparently, %b doesn't allow None.
# exchangev2.py - repository exchange for wire protocol version 2
#
# Copyright 2018 Gregory Szorc <gregory.szorc@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import collections
import weakref
from .i18n import _
from .node import (
nullid,
short,
)
from . import (
bookmarks,
error,
mdiff,
phases,
pycompat,
setdiscovery,
)
def pull(pullop):
"""Pull using wire protocol version 2."""
repo = pullop.repo
remote = pullop.remote
tr = pullop.trmanager.transaction()
# Figure out what needs to be fetched.
common, fetch, remoteheads = _pullchangesetdiscovery(
repo, remote, pullop.heads, abortwhenunrelated=pullop.force)
# And fetch the data.
pullheads = pullop.heads or remoteheads
csetres = _fetchchangesets(repo, tr, remote, common, fetch, pullheads)
# New revisions are written to the changelog. But all other updates
# are deferred. Do those now.
# Ensure all new changesets are draft by default. If the repo is
# publishing, the phase will be adjusted by the loop below.
if csetres['added']:
phases.registernew(repo, tr, phases.draft, csetres['added'])
# And adjust the phase of all changesets accordingly.
for phase in phases.phasenames:
if phase == b'secret' or not csetres['nodesbyphase'][phase]:
continue
phases.advanceboundary(repo, tr, phases.phasenames.index(phase),
csetres['nodesbyphase'][phase])
# Write bookmark updates.
bookmarks.updatefromremote(repo.ui, repo, csetres['bookmarks'],
remote.url(), pullop.gettransaction,
explicit=pullop.explicitbookmarks)
manres = _fetchmanifests(repo, tr, remote, csetres['manifestnodes'])
# Find all file nodes referenced by added manifests and fetch those
# revisions.
fnodes = _derivefilesfrommanifests(repo, manres['added'])
_fetchfiles(repo, tr, remote, fnodes, manres['linkrevs'])
def _pullchangesetdiscovery(repo, remote, heads, abortwhenunrelated=True):
"""Determine which changesets need to be pulled."""
if heads:
knownnode = repo.changelog.hasnode
if all(knownnode(head) for head in heads):
return heads, False, heads
# TODO wire protocol version 2 is capable of more efficient discovery
# than setdiscovery. Consider implementing something better.
common, fetch, remoteheads = setdiscovery.findcommonheads(
repo.ui, repo, remote, abortwhenunrelated=abortwhenunrelated)
common = set(common)
remoteheads = set(remoteheads)
# If a remote head is filtered locally, put it back in the common set.
# See the comment in exchange._pulldiscoverychangegroup() for more.
if fetch and remoteheads:
nodemap = repo.unfiltered().changelog.nodemap
common |= {head for head in remoteheads if head in nodemap}
if set(remoteheads).issubset(common):
fetch = []
common.discard(nullid)
return common, fetch, remoteheads
def _fetchchangesets(repo, tr, remote, common, fetch, remoteheads):
# TODO consider adding a step here where we obtain the DAG shape first
# (or ask the server to slice changesets into chunks for us) so that
# we can perform multiple fetches in batches. This will facilitate
# resuming interrupted clones, higher server-side cache hit rates due
# to smaller segments, etc.
with remote.commandexecutor() as e:
objs = e.callcommand(b'changesetdata', {
b'noderange': [sorted(common), sorted(remoteheads)],
b'fields': {b'bookmarks', b'parents', b'phase', b'revision'},
}).result()
# The context manager waits on all response data when exiting. So
# we need to remain in the context manager in order to stream data.
return _processchangesetdata(repo, tr, objs)
def _processchangesetdata(repo, tr, objs):
repo.hook('prechangegroup', throw=True,
**pycompat.strkwargs(tr.hookargs))
urepo = repo.unfiltered()
cl = urepo.changelog
cl.delayupdate(tr)
# The first emitted object is a header describing the data that
# follows.
meta = next(objs)
progress = repo.ui.makeprogress(_('changesets'),
unit=_('chunks'),
total=meta.get(b'totalitems'))
manifestnodes = {}
def linkrev(node):
repo.ui.debug('add changeset %s\n' % short(node))
# Linkrev for changelog is always self.
return len(cl)
def onchangeset(cl, node):
progress.increment()
revision = cl.changelogrevision(node)
# We need to preserve the mapping of changelog revision to node
# so we can set the linkrev accordingly when manifests are added.
manifestnodes[cl.rev(node)] = revision.manifest
nodesbyphase = {phase: set() for phase in phases.phasenames}
remotebookmarks = {}
# addgroup() expects a 7-tuple describing revisions. This normalizes
# the wire data to that format.
#
# This loop also aggregates non-revision metadata, such as phase
# data.
def iterrevisions():
for cset in objs:
node = cset[b'node']
if b'phase' in cset:
nodesbyphase[cset[b'phase']].add(node)
for mark in cset.get(b'bookmarks', []):
remotebookmarks[mark] = node
# TODO add mechanism for extensions to examine records so they
# can siphon off custom data fields.
extrafields = {}
for field, size in cset.get(b'fieldsfollowing', []):
extrafields[field] = next(objs)
# Some entries might only be metadata only updates.
if b'revision' not in extrafields:
continue
data = extrafields[b'revision']
yield (
node,
cset[b'parents'][0],
cset[b'parents'][1],
# Linknode is always itself for changesets.
cset[b'node'],
# We always send full revisions. So delta base is not set.
nullid,
mdiff.trivialdiffheader(len(data)) + data,
# Flags not yet supported.
0,
)
added = cl.addgroup(iterrevisions(), linkrev, weakref.proxy(tr),
addrevisioncb=onchangeset)
progress.complete()
return {
'added': added,
'nodesbyphase': nodesbyphase,
'bookmarks': remotebookmarks,
'manifestnodes': manifestnodes,
}
def _fetchmanifests(repo, tr, remote, manifestnodes):
rootmanifest = repo.manifestlog.getstorage(b'')
# Some manifests can be shared between changesets. Filter out revisions
# we already know about.
fetchnodes = []
linkrevs = {}
seen = set()
for clrev, node in sorted(manifestnodes.iteritems()):
if node in seen:
continue
try:
rootmanifest.rev(node)
except error.LookupError:
fetchnodes.append(node)
linkrevs[node] = clrev
seen.add(node)
# TODO handle tree manifests
# addgroup() expects 7-tuple describing revisions. This normalizes
# the wire data to that format.
def iterrevisions(objs, progress):
for manifest in objs:
node = manifest[b'node']
extrafields = {}
for field, size in manifest.get(b'fieldsfollowing', []):
extrafields[field] = next(objs)
if b'delta' in extrafields:
basenode = manifest[b'deltabasenode']
delta = extrafields[b'delta']
elif b'revision' in extrafields:
basenode = nullid
revision = extrafields[b'revision']
delta = mdiff.trivialdiffheader(len(revision)) + revision
else:
continue
yield (
node,
manifest[b'parents'][0],
manifest[b'parents'][1],
# The value passed in is passed to the lookup function passed
# to addgroup(). We already have a map of manifest node to
# changelog revision number. So we just pass in the
# manifest node here and use linkrevs.__getitem__ as the
# resolution function.
node,
basenode,
delta,
# Flags not yet supported.
0
)
progress.increment()
progress = repo.ui.makeprogress(_('manifests'), unit=_('chunks'),
total=len(fetchnodes))
# Fetch manifests 10,000 per command.
# TODO have server advertise preferences?
# TODO make size configurable on client?
batchsize = 10000
# We send commands 1 at a time to the remote. This is not the most
# efficient because we incur a round trip at the end of each batch.
# However, the existing frame-based reactor keeps consuming server
# data in the background. And this results in response data buffering
# in memory. This can consume gigabytes of memory.
# TODO send multiple commands in a request once background buffering
# issues are resolved.
added = []
for i in pycompat.xrange(0, len(fetchnodes), batchsize):
batch = [node for node in fetchnodes[i:i + batchsize]]
if not batch:
continue
with remote.commandexecutor() as e:
objs = e.callcommand(b'manifestdata', {
b'tree': b'',
b'nodes': batch,
b'fields': {b'parents', b'revision'},
b'haveparents': True,
}).result()
# Chomp off header object.
next(objs)
added.extend(rootmanifest.addgroup(
iterrevisions(objs, progress),
linkrevs.__getitem__,
weakref.proxy(tr)))
progress.complete()
return {
'added': added,
'linkrevs': linkrevs,
}
def _derivefilesfrommanifests(repo, manifestnodes):
"""Determine what file nodes are relevant given a set of manifest nodes.
Returns a dict mapping file paths to dicts of file node to first manifest
node.
"""
ml = repo.manifestlog
fnodes = collections.defaultdict(dict)
for manifestnode in manifestnodes:
m = ml.get(b'', manifestnode)
# TODO this will pull in unwanted nodes because it takes the storage
# delta into consideration. What we really want is something that takes
# the delta between the manifest's parents. And ideally we would
# ignore file nodes that are known locally. For now, ignore both
# these limitations. This will result in incremental fetches requesting
# data we already have. So this is far from ideal.
md = m.readfast()
for path, fnode in md.items():
fnodes[path].setdefault(fnode, manifestnode)
return fnodes
def _fetchfiles(repo, tr, remote, fnodes, linkrevs):
def iterrevisions(objs, progress):
for filerevision in objs:
node = filerevision[b'node']
extrafields = {}
for field, size in filerevision.get(b'fieldsfollowing', []):
extrafields[field] = next(objs)
if b'delta' in extrafields:
basenode = filerevision[b'deltabasenode']
delta = extrafields[b'delta']
elif b'revision' in extrafields:
basenode = nullid
revision = extrafields[b'revision']
delta = mdiff.trivialdiffheader(len(revision)) + revision
else:
continue
yield (
node,
filerevision[b'parents'][0],
filerevision[b'parents'][1],
node,
basenode,
delta,
# Flags not yet supported.
0,
)
progress.increment()
progress = repo.ui.makeprogress(
_('files'), unit=_('chunks'),
total=sum(len(v) for v in fnodes.itervalues()))
# TODO make batch size configurable
batchsize = 10000
fnodeslist = [x for x in sorted(fnodes.items())]
for i in pycompat.xrange(0, len(fnodeslist), batchsize):
batch = [x for x in fnodeslist[i:i + batchsize]]
if not batch:
continue
with remote.commandexecutor() as e:
fs = []
locallinkrevs = {}
for path, nodes in batch:
fs.append((path, e.callcommand(b'filedata', {
b'path': path,
b'nodes': sorted(nodes),
b'fields': {b'parents', b'revision'},
b'haveparents': True,
})))
locallinkrevs[path] = {
node: linkrevs[manifestnode]
for node, manifestnode in nodes.iteritems()}
for path, f in fs:
objs = f.result()
# Chomp off header objects.
next(objs)
store = repo.file(path)
store.addgroup(
iterrevisions(objs, progress),
locallinkrevs[path].__getitem__,
weakref.proxy(tr))