view hgext/pager.py @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

# pager.py - display output using a pager
#
# Copyright 2008 David Soria Parra <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#
# To load the extension, add it to your configuration file:
#
#   [extension]
#   pager =
#
# Run "hg help pager" to get info on configuration.

'''browse command output with an external pager

To set the pager that should be used, set the application variable::

  [pager]
  pager = less -FRX

If no pager is set, the pager extensions uses the environment variable
$PAGER. If neither pager.pager, nor $PAGER is set, no pager is used.

You can disable the pager for certain commands by adding them to the
pager.ignore list::

  [pager]
  ignore = version, help, update

You can also enable the pager only for certain commands using
pager.attend. Below is the default list of commands to be paged::

  [pager]
  attend = annotate, cat, diff, export, glog, log, qdiff

Setting pager.attend to an empty value will cause all commands to be
paged.

If pager.attend is present, pager.ignore will be ignored.

Lastly, you can enable and disable paging for individual commands with
the attend-<command> option. This setting takes precedence over
existing attend and ignore options and defaults::

  [pager]
  attend-cat = false

To ignore global commands like :hg:`version` or :hg:`help`, you have
to specify them in your user configuration file.

The --pager=... option can also be used to control when the pager is
used. Use a boolean value like yes, no, on, off, or use auto for
normal behavior.

'''

import atexit, sys, os, signal, subprocess, errno, shlex
from mercurial import commands, dispatch, util, extensions, cmdutil
from mercurial.i18n import _

testedwith = 'internal'

def _pagerfork(ui, p):
    if not util.safehasattr(os, 'fork'):
        sys.stdout = util.popen(p, 'wb')
        if ui._isatty(sys.stderr):
            sys.stderr = sys.stdout
        return
    fdin, fdout = os.pipe()
    pid = os.fork()
    if pid == 0:
        os.close(fdin)
        os.dup2(fdout, sys.stdout.fileno())
        if ui._isatty(sys.stderr):
            os.dup2(fdout, sys.stderr.fileno())
        os.close(fdout)
        return
    os.dup2(fdin, sys.stdin.fileno())
    os.close(fdin)
    os.close(fdout)
    try:
        os.execvp('/bin/sh', ['/bin/sh', '-c', p])
    except OSError, e:
        if e.errno == errno.ENOENT:
            # no /bin/sh, try executing the pager directly
            args = shlex.split(p)
            os.execvp(args[0], args)
        else:
            raise

def _pagersubprocess(ui, p):
    pager = subprocess.Popen(p, shell=True, bufsize=-1,
                             close_fds=util.closefds, stdin=subprocess.PIPE,
                             stdout=sys.stdout, stderr=sys.stderr)

    stdout = os.dup(sys.stdout.fileno())
    stderr = os.dup(sys.stderr.fileno())
    os.dup2(pager.stdin.fileno(), sys.stdout.fileno())
    if ui._isatty(sys.stderr):
        os.dup2(pager.stdin.fileno(), sys.stderr.fileno())

    @atexit.register
    def killpager():
        if util.safehasattr(signal, "SIGINT"):
            signal.signal(signal.SIGINT, signal.SIG_IGN)
        pager.stdin.close()
        os.dup2(stdout, sys.stdout.fileno())
        os.dup2(stderr, sys.stderr.fileno())
        pager.wait()

def _runpager(ui, p):
    # The subprocess module shipped with Python <= 2.4 is buggy (issue3533).
    # The compat version is buggy on Windows (issue3225), but has been shipping
    # with hg for a long time.  Preserve existing functionality.
    if sys.version_info >= (2, 5):
        _pagersubprocess(ui, p)
    else:
        _pagerfork(ui, p)

def uisetup(ui):
    if '--debugger' in sys.argv or not ui.formatted():
        return

    def pagecmd(orig, ui, options, cmd, cmdfunc):
        p = ui.config("pager", "pager", os.environ.get("PAGER"))
        usepager = False
        always = util.parsebool(options['pager'])
        auto = options['pager'] == 'auto'

        if not p:
            pass
        elif always:
            usepager = True
        elif not auto:
            usepager = False
        else:
            attend = ui.configlist('pager', 'attend', attended)
            ignore = ui.configlist('pager', 'ignore')
            cmds, _ = cmdutil.findcmd(cmd, commands.table)

            for cmd in cmds:
                var = 'attend-%s' % cmd
                if ui.config('pager', var):
                    usepager = ui.configbool('pager', var)
                    break
                if (cmd in attend or
                     (cmd not in ignore and not attend)):
                    usepager = True
                    break

        setattr(ui, 'pageractive', usepager)

        if usepager:
            ui.setconfig('ui', 'formatted', ui.formatted(), 'pager')
            ui.setconfig('ui', 'interactive', False, 'pager')
            if util.safehasattr(signal, "SIGPIPE"):
                signal.signal(signal.SIGPIPE, signal.SIG_DFL)
            _runpager(ui, p)
        return orig(ui, options, cmd, cmdfunc)

    # Wrap dispatch._runcommand after color is loaded so color can see
    # ui.pageractive. Otherwise, if we loaded first, color's wrapped
    # dispatch._runcommand would run without having access to ui.pageractive.
    def afterloaded(loaded):
        extensions.wrapfunction(dispatch, '_runcommand', pagecmd)
    extensions.afterloaded('color', afterloaded)

def extsetup(ui):
    commands.globalopts.append(
        ('', 'pager', 'auto',
         _("when to paginate (boolean, always, auto, or never)"),
         _('TYPE')))

attended = ['annotate', 'cat', 'diff', 'export', 'glog', 'log', 'qdiff']