view tests/test-archive.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require serve

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ hg commit -Am 1 -d '1 0'
  adding foo
  $ echo bar>bar
  $ hg commit -Am 2 -d '2 0'
  adding bar
  $ mkdir baz
  $ echo bletch>baz/bletch
  $ hg commit -Am 3 -d '1000000000 0'
  adding baz/bletch
  $ hg init subrepo
  $ touch subrepo/sub
  $ hg -q -R subrepo ci -Am "init subrepo"
  $ echo "subrepo = subrepo" > .hgsub
  $ hg add .hgsub
  $ hg ci -m "add subrepo"
  $ echo "[web]" >> .hg/hgrc
  $ echo "name = test-archive" >> .hg/hgrc
  $ echo "archivesubrepos = True" >> .hg/hgrc
  $ cp .hg/hgrc .hg/hgrc-base
  > test_archtype() {
  >     echo "allow_archive = $1" >> .hg/hgrc
  >     hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
  >     cat hg.pid >> $DAEMON_PIDS
  >     echo % $1 allowed should give 200
  >     "$TESTDIR/get-with-headers.py" localhost:$HGPORT "archive/tip.$2" | head -n 1
  >     echo % $3 and $4 disallowed should both give 403
  >     "$TESTDIR/get-with-headers.py" localhost:$HGPORT "archive/tip.$3" | head -n 1
  >     "$TESTDIR/get-with-headers.py" localhost:$HGPORT "archive/tip.$4" | head -n 1
  >     "$TESTDIR/killdaemons.py" $DAEMON_PIDS
  >     cat errors.log
  >     cp .hg/hgrc-base .hg/hgrc
  > }

check http return codes

  $ test_archtype gz tar.gz tar.bz2 zip
  % gz allowed should give 200
  200 Script output follows
  % tar.bz2 and zip disallowed should both give 403
  403 Archive type not allowed: bz2
  403 Archive type not allowed: zip
  $ test_archtype bz2 tar.bz2 zip tar.gz
  % bz2 allowed should give 200
  200 Script output follows
  % zip and tar.gz disallowed should both give 403
  403 Archive type not allowed: zip
  403 Archive type not allowed: gz
  $ test_archtype zip zip tar.gz tar.bz2
  % zip allowed should give 200
  200 Script output follows
  % tar.gz and tar.bz2 disallowed should both give 403
  403 Archive type not allowed: gz
  403 Archive type not allowed: bz2

  $ echo "allow_archive = gz bz2 zip" >> .hg/hgrc
  $ hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
  $ cat hg.pid >> $DAEMON_PIDS

invalid arch type should give 404

  $ "$TESTDIR/get-with-headers.py" localhost:$HGPORT "archive/tip.invalid" | head -n 1
  404 Unsupported archive type: None

  $ TIP=`hg id -v | cut -f1 -d' '`
  $ QTIP=`hg id -q`
  $ cat > getarchive.py <<EOF
  > import os, sys, urllib2
  > try:
  >     # Set stdout to binary mode for win32 platforms
  >     import msvcrt
  >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
  > except ImportError:
  >     pass
  > if len(sys.argv) <= 3:
  >     node, archive = sys.argv[1:]
  >     requeststr = 'cmd=archive;node=%s;type=%s' % (node, archive)
  > else:
  >     node, archive, file = sys.argv[1:]
  >     requeststr = 'cmd=archive;node=%s;type=%s;file=%s' % (node, archive, file)
  > try:
  >     f = urllib2.urlopen('http://127.0.0.1:%s/?%s'
  >                     % (os.environ['HGPORT'], requeststr))
  >     sys.stdout.write(f.read())
  > except urllib2.HTTPError, e:
  >     sys.stderr.write(str(e) + '\n')
  > EOF
  $ python getarchive.py "$TIP" gz | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/.hg_archival.txt
  test-archive-1701ef1f1510/.hgsub
  test-archive-1701ef1f1510/.hgsubstate
  test-archive-1701ef1f1510/bar
  test-archive-1701ef1f1510/baz/bletch
  test-archive-1701ef1f1510/foo
  test-archive-1701ef1f1510/subrepo/sub
  $ python getarchive.py "$TIP" bz2 | bunzip2 | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/.hg_archival.txt
  test-archive-1701ef1f1510/.hgsub
  test-archive-1701ef1f1510/.hgsubstate
  test-archive-1701ef1f1510/bar
  test-archive-1701ef1f1510/baz/bletch
  test-archive-1701ef1f1510/foo
  test-archive-1701ef1f1510/subrepo/sub
  $ python getarchive.py "$TIP" zip > archive.zip
  $ unzip -t archive.zip
  Archive:  archive.zip
      testing: test-archive-1701ef1f1510/.hg_archival.txt   OK
      testing: test-archive-1701ef1f1510/.hgsub   OK
      testing: test-archive-1701ef1f1510/.hgsubstate   OK
      testing: test-archive-1701ef1f1510/bar   OK
      testing: test-archive-1701ef1f1510/baz/bletch   OK
      testing: test-archive-1701ef1f1510/foo   OK
      testing: test-archive-1701ef1f1510/subrepo/sub   OK
  No errors detected in compressed data of archive.zip.

test that we can download single directories and files

  $ python getarchive.py "$TIP" gz baz | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/baz/bletch
  $ python getarchive.py "$TIP" gz foo | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/foo

test that we detect file patterns that match no files

  $ python getarchive.py "$TIP" gz foobar
  HTTP Error 404: file(s) not found: foobar

test that we reject unsafe patterns

  $ python getarchive.py "$TIP" gz relre:baz
  HTTP Error 404: file(s) not found: relre:baz

  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS

  $ hg archive -t tar test.tar
  $ tar tf test.tar
  test/.hg_archival.txt
  test/.hgsub
  test/.hgsubstate
  test/bar
  test/baz/bletch
  test/foo

  $ hg archive --debug -t tbz2 -X baz test.tar.bz2
  archiving: 0/4 files (0.00%)
  archiving: .hgsub 1/4 files (25.00%)
  archiving: .hgsubstate 2/4 files (50.00%)
  archiving: bar 3/4 files (75.00%)
  archiving: foo 4/4 files (100.00%)
  $ bunzip2 -dc test.tar.bz2 | tar tf - 2>/dev/null
  test/.hg_archival.txt
  test/.hgsub
  test/.hgsubstate
  test/bar
  test/foo

  $ hg archive -t tgz -p %b-%h test-%h.tar.gz
  $ gzip -dc test-$QTIP.tar.gz | tar tf - 2>/dev/null
  test-1701ef1f1510/.hg_archival.txt
  test-1701ef1f1510/.hgsub
  test-1701ef1f1510/.hgsubstate
  test-1701ef1f1510/bar
  test-1701ef1f1510/baz/bletch
  test-1701ef1f1510/foo

  $ hg archive autodetected_test.tar
  $ tar tf autodetected_test.tar
  autodetected_test/.hg_archival.txt
  autodetected_test/.hgsub
  autodetected_test/.hgsubstate
  autodetected_test/bar
  autodetected_test/baz/bletch
  autodetected_test/foo

The '-t' should override autodetection

  $ hg archive -t tar autodetect_override_test.zip
  $ tar tf autodetect_override_test.zip
  autodetect_override_test.zip/.hg_archival.txt
  autodetect_override_test.zip/.hgsub
  autodetect_override_test.zip/.hgsubstate
  autodetect_override_test.zip/bar
  autodetect_override_test.zip/baz/bletch
  autodetect_override_test.zip/foo

  $ for ext in tar tar.gz tgz tar.bz2 tbz2 zip; do
  >     hg archive auto_test.$ext
  >     if [ -d auto_test.$ext ]; then
  >         echo "extension $ext was not autodetected."
  >     fi
  > done

  $ cat > md5comp.py <<EOF
  > try:
  >     from hashlib import md5
  > except ImportError:
  >     from md5 import md5
  > import sys
  > f1, f2 = sys.argv[1:3]
  > h1 = md5(file(f1, 'rb').read()).hexdigest()
  > h2 = md5(file(f2, 'rb').read()).hexdigest()
  > print h1 == h2 or "md5 differ: " + repr((h1, h2))
  > EOF

archive name is stored in the archive, so create similar archives and
rename them afterwards.

  $ hg archive -t tgz tip.tar.gz
  $ mv tip.tar.gz tip1.tar.gz
  $ sleep 1
  $ hg archive -t tgz tip.tar.gz
  $ mv tip.tar.gz tip2.tar.gz
  $ python md5comp.py tip1.tar.gz tip2.tar.gz
  True

  $ hg archive -t zip -p /illegal test.zip
  abort: archive prefix contains illegal components
  [255]
  $ hg archive -t zip -p very/../bad test.zip

  $ hg archive --config ui.archivemeta=false -t zip -r 2 test.zip
  $ unzip -t test.zip
  Archive:  test.zip
      testing: test/bar                 OK
      testing: test/baz/bletch          OK
      testing: test/foo                 OK
  No errors detected in compressed data of test.zip.

  $ hg archive -t tar - | tar tf - 2>/dev/null
  test-1701ef1f1510/.hg_archival.txt
  test-1701ef1f1510/.hgsub
  test-1701ef1f1510/.hgsubstate
  test-1701ef1f1510/bar
  test-1701ef1f1510/baz/bletch
  test-1701ef1f1510/foo

  $ hg archive -r 0 -t tar rev-%r.tar
  $ [ -f rev-0.tar ]

test .hg_archival.txt

  $ hg archive ../test-tags
  $ cat ../test-tags/.hg_archival.txt
  repo: daa7f7c60e0a224faa4ff77ca41b2760562af264
  node: 1701ef1f151069b8747038e93b5186bb43a47504
  branch: default
  latesttag: null
  latesttagdistance: 4
  changessincelatesttag: 4
  $ hg tag -r 2 mytag
  $ hg tag -r 2 anothertag
  $ hg archive -r 2 ../test-lasttag
  $ cat ../test-lasttag/.hg_archival.txt
  repo: daa7f7c60e0a224faa4ff77ca41b2760562af264
  node: 2c0277f05ed49d1c8328fb9ba92fba7a5ebcb33e
  branch: default
  tag: anothertag
  tag: mytag

  $ hg archive -t bogus test.bogus
  abort: unknown archive type 'bogus'
  [255]

enable progress extension:

  $ cp $HGRCPATH $HGRCPATH.no-progress
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress =
  > [progress]
  > assume-tty = 1
  > format = topic bar number
  > delay = 0
  > refresh = 0
  > width = 60
  > EOF

  $ hg archive ../with-progress
  \r (no-eol) (esc)
  archiving [                                           ] 0/6\r (no-eol) (esc)
  archiving [                                           ] 0/6\r (no-eol) (esc)
  archiving [======>                                    ] 1/6\r (no-eol) (esc)
  archiving [======>                                    ] 1/6\r (no-eol) (esc)
  archiving [=============>                             ] 2/6\r (no-eol) (esc)
  archiving [=============>                             ] 2/6\r (no-eol) (esc)
  archiving [====================>                      ] 3/6\r (no-eol) (esc)
  archiving [====================>                      ] 3/6\r (no-eol) (esc)
  archiving [===========================>               ] 4/6\r (no-eol) (esc)
  archiving [===========================>               ] 4/6\r (no-eol) (esc)
  archiving [==================================>        ] 5/6\r (no-eol) (esc)
  archiving [==================================>        ] 5/6\r (no-eol) (esc)
  archiving [==========================================>] 6/6\r (no-eol) (esc)
  archiving [==========================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

cleanup after progress extension test:

  $ cp $HGRCPATH.no-progress $HGRCPATH

server errors

  $ cat errors.log

empty repo

  $ hg init ../empty
  $ cd ../empty
  $ hg archive ../test-empty
  abort: no working directory: please specify a revision
  [255]

old file -- date clamped to 1980

  $ touch -t 197501010000 old
  $ hg add old
  $ hg commit -m old
  $ hg archive ../old.zip
  $ unzip -l ../old.zip
  Archive:  ../old.zip
  \s*Length.* (re)
  *-----* (glob)
  *172*80*00:00*old/.hg_archival.txt (glob)
  *0*80*00:00*old/old (glob)
  *-----* (glob)
  \s*172\s+2 files (re)

show an error when a provided pattern matches no files

  $ hg archive -I file_that_does_not_exist.foo ../empty.zip
  abort: no files match the archive pattern
  [255]

  $ hg archive -X * ../empty.zip
  abort: no files match the archive pattern
  [255]

  $ cd ..

issue3600: check whether "hg archive" can create archive files which
are extracted with expected timestamp, even though TZ is not
configured as GMT.

  $ mkdir issue3600
  $ cd issue3600

  $ hg init repo
  $ echo a > repo/a
  $ hg -R repo add repo/a
  $ hg -R repo commit -m '#0' -d '456789012 21600'
  $ cat > show_mtime.py <<EOF
  > import sys, os
  > print int(os.stat(sys.argv[1]).st_mtime)
  > EOF

  $ hg -R repo archive --prefix tar-extracted archive.tar
  $ (TZ=UTC-3; export TZ; tar xf archive.tar)
  $ python show_mtime.py tar-extracted/a
  456789012

  $ hg -R repo archive --prefix zip-extracted archive.zip
  $ (TZ=UTC-3; export TZ; unzip -q archive.zip)
  $ python show_mtime.py zip-extracted/a
  456789012

  $ cd ..