view tests/test-casecollision-merge.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require icasefs

################################
test for branch merging
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file:
this is also case for issue3370.

  $ hg init branch_merge_renaming
  $ cd branch_merge_renaming

  $ echo a > a
  $ hg add a
  $ echo b > b
  $ hg add b
  $ hg commit -m '#0'
  $ hg tag -l A
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'
  $ hg tag -l B
  $ hg update -q 0
  $ touch x
  $ hg add x
  $ hg commit -m '#2'
  created new head
  $ hg tag -l C

  $ hg merge -q
  $ hg status -A
  M A
  R a
  C b
  C x

  $ hg update -q --clean 1
  $ hg merge -q
  $ hg status -A
  M x
  C A
  C b
  $ hg commit -m '(D)'
  $ hg tag -l D

additional test for issue3452:

| this assumes the history below.
|
|  (A) -- (C) -- (E) -------
|      \      \             \
|       \      \             \
|         (B) -- (D) -- (F) -- (G)
|
|   A: add file 'a'
|   B: rename from 'a' to 'A'
|   C: add 'x' (or operation other than modification of 'a')
|   D: merge C into B
|   E: modify 'a'
|   F: modify 'A'
|   G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)

  $ hg update -q --clean C
  $ echo "modify 'a' at (E)" > a
  $ echo "modify 'b' at (E)" > b
  $ hg commit -m '(E)'
  created new head
  $ hg tag -l E

  $ hg update -q --clean D
  $ echo "modify 'A' at (F)" > A
  $ hg commit -m '(F)'
  $ hg tag -l F

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M A
    a
  M b
  C x
  $ cat A
  modify 'a' at (E)

test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.

to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.

  $ hg update -q --clean A
  $ hg rename b tmp
  $ hg rename tmp B
  $ hg commit -m '(B1)'
  created new head
  $ hg tag -l B1

  $ hg merge -q C
  $ hg status -A
  M x
  C B
  C a
  $ hg commit -m '(D1)'
  $ hg tag -l D1

  $ echo "modify 'B' at (F1)" > B
  $ hg commit -m '(F1)'
  $ hg tag -l F1

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M B
    b
  M a
  C x
  $ cat B
  modify 'b' at (E)

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init branch_merge_collding
  $ cd branch_merge_collding

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'
  $ hg update --clean 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo x > x
  $ hg add x
  $ hg commit -m '#3'
  created new head
  $ echo 'modified at #4' > a
  $ hg commit -m '#4'

  $ hg merge
  abort: case-folding collision between a and A
  [255]
  $ hg parents --template '{rev}\n'
  4
  $ hg status -A
  C a
  C x
  $ cat a
  modified at #4

  $ hg update --clean 2
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  abort: case-folding collision between a and A
  [255]
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.

  $ hg update --clean 3
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M A
  R a
  C x

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M x
  C A

  $ cd ..


################################
test for linear updates
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file

  $ hg init linearupdate_renameaware_1
  $ cd linearupdate_renameaware_1

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo 'this is added line' >> a
  $ hg update 1
  merging a and A to A
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  $ hg status -A
  M A
  $ cat A
  a
  this is added line

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init linearupdate_renameaware_2
  $ cd linearupdate_renameaware_2

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat A
  a
  $ hg up -qC 2

  $ hg update --check 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat a
  a

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

  $ cd ..

(3) colliding file is not related to collided file: added in working dir

  $ hg init linearupdate_renameaware_3
  $ cd linearupdate_renameaware_3

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a b
  $ hg commit -m '#1'
  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo B > B
  $ hg add B
  $ hg status
  A B
  $ hg update
  abort: case-folding collision between b and B
  [255]

  $ hg update --check
  abort: uncommitted changes
  [255]

  $ hg update --clean
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  1
  $ hg status -A
  C b
  $ cat b
  a

  $ cd ..