view tests/test-conflict.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

  $ hg init
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: 618808747361 - test: branch2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: c0c68e4fe667  - test: branch1
  Hop we are done.

  $ hg status
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ printf "\n[ui]\nmergemarkertemplate={author} {rev}\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: test 2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: test 2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ python <<EOF
  > fp = open('logfile', 'w')
  > fp.write('12345678901234567890123456789012345678901234567890' +
  >          '1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: 123456789012345678901234567890123456789012345678901234567890\xe3\x81\x82... (esc)
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< local
  1
  2
  3
  6
  8
  ||||||| base
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> other
  Hop we are done.