view tests/test-convert-cvs-synthetic.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require cvs112

This feature requires use of builtin cvsps!

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create cvs repository with one project

  $ mkdir cvsrepo
  $ cd cvsrepo
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ rmdir cvsrepo
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so just discard it

  $ cvsci()
  > {
  >     sleep 1
  >     cvs -f ci "$@" >/dev/null
  > }
  $ cvscall -d "$CVSROOT" init
  $ mkdir cvsrepo/proj
  $ cvscall -q co proj

create file1 on the trunk

  $ cd proj
  $ touch file1
  $ cvscall -Q add file1
  $ cvsci -m"add file1 on trunk" file1

create two branches

  $ cvscall -q tag -b v1_0
  T file1
  $ cvscall -q tag -b v1_1
  T file1

create file2 on branch v1_0

  $ cvscall -Q up -rv1_0
  $ touch file2
  $ cvscall -Q add file2
  $ cvsci -m"add file2" file2

create file3, file4 on branch v1_1

  $ cvscall -Q up -rv1_1
  $ touch file3
  $ touch file4
  $ cvscall -Q add file3 file4
  $ cvsci -m"add file3, file4 on branch v1_1" file3 file4

merge file2 from v1_0 to v1_1

  $ cvscall -Q up -jv1_0
  $ cvsci -m"MERGE from v1_0: add file2"
  cvs commit: Examining .

Step things up a notch: now we make the history really hairy, with
changes bouncing back and forth between trunk and v1_2 and merges
going both ways.  (I.e., try to model the real world.)
create branch v1_2

  $ cvscall -Q up -A
  $ cvscall -q tag -b v1_2
  T file1

create file5 on branch v1_2

  $ cvscall -Q up -rv1_2
  $ touch file5
  $ cvs -Q add file5
  $ cvsci -m"add file5 on v1_2"
  cvs commit: Examining .

create file6 on trunk post-v1_2

  $ cvscall -Q up -A
  $ touch file6
  $ cvscall -Q add file6
  $ cvsci -m"add file6 on trunk post-v1_2"
  cvs commit: Examining .

merge file5 from v1_2 to trunk

  $ cvscall -Q up -A
  $ cvscall -Q up -jv1_2 file5
  $ cvsci -m"MERGE from v1_2: add file5"
  cvs commit: Examining .

merge file6 from trunk to v1_2

  $ cvscall -Q up -rv1_2
  $ cvscall up -jHEAD file6
  U file6
  $ cvsci -m"MERGE from HEAD: add file6"
  cvs commit: Examining .

cvs rlog output

  $ cvscall -q rlog proj | egrep '^(RCS file|revision)'
  RCS file: $TESTTMP/cvsrepo/proj/file1,v
  revision 1.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file2,v
  revision 1.1
  revision 1.1.4.2
  revision 1.1.4.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file3,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file4,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file5,v
  revision 1.2
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file6,v
  revision 1.1
  revision 1.1.2.2
  revision 1.1.2.1

convert to hg (#1)

  $ cd ..
  $ hg convert --datesort proj proj.hg
  initializing destination proj.hg repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#1)

  $ hg -R proj.hg log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk
  

convert to hg (#2: with merge detection)

  $ hg convert \
  >   --config convert.cvsps.mergefrom='"^MERGE from (\S+):"' \
  >   --datesort \
  >   proj proj.hg2
  initializing destination proj.hg2 repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  9 changeset entries
  sorting...
  converting...
  8 add file1 on trunk
  7 add file2
  6 MERGE from v1_0: add file2
  5 file file3 was initially added on branch v1_1.
  4 add file3, file4 on branch v1_1
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from HEAD: add file6
  0 MERGE from v1_2: add file5

hg log -G output (#2)

  $ hg -R proj.hg2 log -G --template "{rev} {desc}\n"
  o  8 MERGE from v1_2: add file5
  |
  | o  7 MERGE from HEAD: add file6
  | |
  o |  6 add file6 on trunk post-v1_2
  | |
  | o  5 add file5 on v1_2
  | |
  | | o  4 add file3, file4 on branch v1_1
  | | |
  o | |  3 file file3 was initially added on branch v1_1.
  |/ /
  | o  2 MERGE from v1_0: add file2
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk