view tests/test-convert-git.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require git

  $ echo "[core]" >> $HOME/.gitconfig
  $ echo "autocrlf = false" >> $HOME/.gitconfig
  $ echo "[core]" >> $HOME/.gitconfig
  $ echo "autocrlf = false" >> $HOME/.gitconfig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert=" >> $HGRCPATH
  $ GIT_AUTHOR_NAME='test'; export GIT_AUTHOR_NAME
  $ GIT_AUTHOR_EMAIL='[e-mail]'; export GIT_AUTHOR_EMAIL
  $ GIT_AUTHOR_DATE="2007-01-01 00:00:00 +0000"; export GIT_AUTHOR_DATE
  $ GIT_COMMITTER_NAME="$GIT_AUTHOR_NAME"; export GIT_COMMITTER_NAME
  $ GIT_COMMITTER_EMAIL="$GIT_AUTHOR_EMAIL"; export GIT_COMMITTER_EMAIL
  $ GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"; export GIT_COMMITTER_DATE
  $ INVALIDID1=afd12345af
  $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86
  $ VALIDID1=39b3d83f9a69a9ba4ebb111461071a0af0027357
  $ VALIDID2=8dd6476bd09d9c7776355dc454dafe38efaec5da
  $ count=10
  $ commit()
  > {
  >     GIT_AUTHOR_DATE="2007-01-01 00:00:$count +0000"
  >     GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"
  >     git commit "$@" >/dev/null 2>/dev/null || echo "git commit error"
  >     count=`expr $count + 1`
  > }
  $ mkdir git-repo
  $ cd git-repo
  $ git init-db >/dev/null 2>/dev/null
  $ echo a > a
  $ mkdir d
  $ echo b > d/b
  $ git add a d
  $ commit -a -m t1

Remove the directory, then try to replace it with a file (issue754)

  $ git rm -f d/b
  rm 'd/b'
  $ commit -m t2
  $ echo d > d
  $ git add d
  $ commit -m t3
  $ echo b >> a
  $ commit -a -m t4.1
  $ git checkout -b other HEAD~ >/dev/null 2>/dev/null
  $ echo c > a
  $ echo a >> a
  $ commit -a -m t4.2
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit . other > /dev/null 2>/dev/null
  $ commit -m 'Merge branch other'
  $ cd ..
  $ hg convert --config extensions.progress= --config progress.assume-tty=1 \
  >   --config progress.delay=0 --config progress.changedelay=0 \
  >   --config progress.refresh=0 --config progress.width=60 \
  > --datesort git-repo
  \r (no-eol) (esc)
  scanning [======>                                     ] 1/6\r (no-eol) (esc)
  scanning [=============>                              ] 2/6\r (no-eol) (esc)
  scanning [=====================>                      ] 3/6\r (no-eol) (esc)
  scanning [============================>               ] 4/6\r (no-eol) (esc)
  scanning [===================================>        ] 5/6\r (no-eol) (esc)
  scanning [===========================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/6\r (no-eol) (esc)
  getting files [==================>                    ] 1/2\r (no-eol) (esc)
  getting files [======================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [======>                                   ] 1/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============>                            ] 2/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [====================>                     ] 3/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========================>              ] 4/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [==================================>       ] 5/6\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  assuming destination git-repo-hg
  initializing destination git-repo-hg repository
  scanning source...
  sorting...
  converting...
  5 t1
  4 t2
  3 t3
  2 t4.1
  1 t4.2
  0 Merge branch other
  updating bookmarks
  $ hg up -q -R git-repo-hg
  $ hg -R git-repo-hg tip -v
  changeset:   5:c78094926be2
  bookmark:    master
  tag:         tip
  parent:      3:f5f5cb45432b
  parent:      4:4e174f80c67c
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:15 2007 +0000
  files:       a
  description:
  Merge branch other
  
  
  $ count=10
  $ mkdir git-repo2
  $ cd git-repo2
  $ git init-db >/dev/null 2>/dev/null
  $ echo foo > foo
  $ git add foo
  $ commit -a -m 'add foo'
  $ echo >> foo
  $ commit -a -m 'change foo'
  $ git checkout -b Bar HEAD~ >/dev/null 2>/dev/null
  $ echo quux >> quux
  $ git add quux
  $ commit -a -m 'add quux'
  $ echo bar > bar
  $ git add bar
  $ commit -a -m 'add bar'
  $ git checkout -b Baz HEAD~ >/dev/null 2>/dev/null
  $ echo baz > baz
  $ git add baz
  $ commit -a -m 'add baz'
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit . Bar Baz > /dev/null 2>/dev/null
  $ commit -m 'Octopus merge'
  $ echo bar >> bar
  $ commit -a -m 'change bar'
  $ git checkout -b Foo HEAD~ >/dev/null 2>/dev/null
  $ echo >> foo
  $ commit -a -m 'change foo'
  $ git checkout master >/dev/null 2>/dev/null
  $ git pull --no-commit -s ours . Foo > /dev/null 2>/dev/null
  $ commit -m 'Discard change to foo'
  $ cd ..
  $ glog()
  > {
  >     hg log -G --template '{rev} "{desc|firstline}" files: {files}\n' "$@"
  > }
  $ splitrepo()
  > {
  >     msg="$1"
  >     files="$2"
  >     opts=$3
  >     echo "% $files: $msg"
  >     prefix=`echo "$files" | sed -e 's/ /-/g'`
  >     fmap="$prefix.fmap"
  >     repo="$prefix.repo"
  >     for i in $files; do
  >         echo "include $i" >> "$fmap"
  >     done
  >     hg -q convert $opts --filemap "$fmap" --datesort git-repo2 "$repo"
  >     hg up -q -R "$repo"
  >     glog -R "$repo"
  >     hg -R "$repo" manifest --debug
  > }

full conversion

  $ hg convert --datesort git-repo2 fullrepo \
  > --config extensions.progress= --config progress.assume-tty=1 \
  > --config progress.delay=0 --config progress.changedelay=0 \
  > --config progress.refresh=0 --config progress.width=60
  \r (no-eol) (esc)
  scanning [===>                                        ] 1/9\r (no-eol) (esc)
  scanning [========>                                   ] 2/9\r (no-eol) (esc)
  scanning [=============>                              ] 3/9\r (no-eol) (esc)
  scanning [==================>                         ] 4/9\r (no-eol) (esc)
  scanning [=======================>                    ] 5/9\r (no-eol) (esc)
  scanning [============================>               ] 6/9\r (no-eol) (esc)
  scanning [=================================>          ] 7/9\r (no-eol) (esc)
  scanning [======================================>     ] 8/9\r (no-eol) (esc)
  scanning [===========================================>] 9/9\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [                                          ] 0/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===>                                      ] 1/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [========>                                 ] 2/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=============>                            ] 3/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [=================>                        ] 4/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [======================>                   ] 5/9\r (no-eol) (esc)
  getting files [===>                                   ] 1/8\r (no-eol) (esc)
  getting files [========>                              ] 2/8\r (no-eol) (esc)
  getting files [=============>                         ] 3/8\r (no-eol) (esc)
  getting files [==================>                    ] 4/8\r (no-eol) (esc)
  getting files [=======================>               ] 5/8\r (no-eol) (esc)
  getting files [============================>          ] 6/8\r (no-eol) (esc)
  getting files [=================================>     ] 7/8\r (no-eol) (esc)
  getting files [======================================>] 8/8\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===========================>              ] 6/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [===============================>          ] 7/9\r (no-eol) (esc)
  getting files [======================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  converting [====================================>     ] 8/9\r (no-eol) (esc)
  getting files [==================>                    ] 1/2\r (no-eol) (esc)
  getting files [======================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  initializing destination fullrepo repository
  scanning source...
  sorting...
  converting...
  8 add foo
  7 change foo
  6 add quux
  5 add bar
  4 add baz
  3 Octopus merge
  2 change bar
  1 change foo
  0 Discard change to foo
  updating bookmarks
  $ hg up -q -R fullrepo
  $ glog -R fullrepo
  @    9 "Discard change to foo" files: foo
  |\
  | o  8 "change foo" files: foo
  | |
  o |  7 "change bar" files: bar
  |/
  o    6 "(octopus merge fixup)" files:
  |\
  | o    5 "Octopus merge" files: baz
  | |\
  o | |  4 "add baz" files: baz
  | | |
  +---o  3 "add bar" files: bar
  | |
  o |  2 "add quux" files: quux
  | |
  | o  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  $ hg -R fullrepo manifest --debug
  245a3b8bc653999c2b22cdabd517ccb47aecafdf 644   bar
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  88dfeab657e8cf2cef3dec67b914f49791ae76b1 644   quux
  $ splitrepo 'octopus merge' 'foo bar baz'
  % foo bar baz: octopus merge
  @    8 "Discard change to foo" files: foo
  |\
  | o  7 "change foo" files: foo
  | |
  o |  6 "change bar" files: bar
  |/
  o    5 "(octopus merge fixup)" files:
  |\
  | o    4 "Octopus merge" files: baz
  | |\
  o | |  3 "add baz" files: baz
  | | |
  +---o  2 "add bar" files: bar
  | |
  | o  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  245a3b8bc653999c2b22cdabd517ccb47aecafdf 644   bar
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  $ splitrepo 'only some parents of an octopus merge; "discard" a head' 'foo baz quux'
  % foo baz quux: only some parents of an octopus merge; "discard" a head
  @  6 "Discard change to foo" files: foo
  |
  o  5 "change foo" files: foo
  |
  o    4 "Octopus merge" files:
  |\
  | o  3 "add baz" files: baz
  | |
  | o  2 "add quux" files: quux
  | |
  o |  1 "change foo" files: foo
  |/
  o  0 "add foo" files: foo
  
  354ae8da6e890359ef49ade27b68bbc361f3ca88 644   baz
  9277c9cc8dd4576fc01a17939b4351e5ada93466 644   foo
  88dfeab657e8cf2cef3dec67b914f49791ae76b1 644   quux

test importing git renames and copies

  $ cd git-repo2
  $ git mv foo foo-renamed
since bar is not touched in this commit, this copy will not be detected
  $ cp bar bar-copied
  $ cp baz baz-copied
  $ cp baz baz-copied2
  $ echo baz2 >> baz
  $ git add bar-copied baz-copied baz-copied2
  $ commit -a -m 'rename and copy'
  $ cd ..

input validation
  $ hg convert --config convert.git.similarity=foo --datesort git-repo2 fullrepo
  abort: convert.git.similarity is not an integer ('foo')
  [255]
  $ hg convert --config convert.git.similarity=-1 --datesort git-repo2 fullrepo
  abort: similarity must be between 0 and 100
  [255]
  $ hg convert --config convert.git.similarity=101 --datesort git-repo2 fullrepo
  abort: similarity must be between 0 and 100
  [255]

  $ hg -q convert --config convert.git.similarity=100 --datesort git-repo2 fullrepo
  $ hg -R fullrepo status -C --change master
  M baz
  A bar-copied
  A baz-copied
    baz
  A baz-copied2
    baz
  A foo-renamed
    foo
  R foo

  $ cd git-repo2
  $ echo bar2 >> bar
  $ commit -a -m 'change bar'
  $ cp bar bar-copied2
  $ git add bar-copied2
  $ commit -a -m 'copy with no changes'
  $ cd ..

  $ hg -q convert --config convert.git.similarity=100 \
  > --config convert.git.findcopiesharder=1 --datesort git-repo2 fullrepo
  $ hg -R fullrepo status -C --change master
  A bar-copied2
    bar

test binary conversion (issue1359)

  $ count=19
  $ mkdir git-repo3
  $ cd git-repo3
  $ git init-db >/dev/null 2>/dev/null
  $ $PYTHON -c 'file("b", "wb").write("".join([chr(i) for i in range(256)])*16)'
  $ git add b
  $ commit -a -m addbinary
  $ cd ..

convert binary file

  $ hg convert git-repo3 git-repo3-hg
  initializing destination git-repo3-hg repository
  scanning source...
  sorting...
  converting...
  0 addbinary
  updating bookmarks
  $ cd git-repo3-hg
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ $PYTHON -c 'print len(file("b", "rb").read())'
  4096
  $ cd ..

test author vs committer

  $ mkdir git-repo4
  $ cd git-repo4
  $ git init-db >/dev/null 2>/dev/null
  $ echo >> foo
  $ git add foo
  $ commit -a -m addfoo
  $ echo >> foo
  $ GIT_AUTHOR_NAME="nottest"
  $ commit -a -m addfoo2
  $ cd ..

convert author committer

  $ hg convert git-repo4 git-repo4-hg
  initializing destination git-repo4-hg repository
  scanning source...
  sorting...
  converting...
  1 addfoo
  0 addfoo2
  updating bookmarks
  $ hg -R git-repo4-hg log -v
  changeset:   1:d63e967f93da
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:21 2007 +0000
  files:       foo
  description:
  addfoo2
  
  committer: test <[e-mail]>
  
  
  changeset:   0:0735477b0224
  user:        test <[e-mail]>
  date:        Mon Jan 01 00:00:20 2007 +0000
  files:       foo
  description:
  addfoo
  
  

--sourceorder should fail

  $ hg convert --sourcesort git-repo4 git-repo4-sourcesort-hg
  initializing destination git-repo4-sourcesort-hg repository
  abort: --sourcesort is not supported by this data source
  [255]

test sub modules

  $ mkdir git-repo5
  $ cd git-repo5
  $ git init-db >/dev/null 2>/dev/null
  $ echo 'sub' >> foo
  $ git add foo
  $ commit -a -m 'addfoo'
  $ BASE=`pwd`
  $ cd ..
  $ mkdir git-repo6
  $ cd git-repo6
  $ git init-db >/dev/null 2>/dev/null
  $ git submodule add ${BASE} >/dev/null 2>/dev/null
  $ commit -a -m 'addsubmodule' >/dev/null 2>/dev/null
  $ cd ..

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $VALIDID1
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap1-hg
  initializing destination git-repo2-splicemap1-hg repository
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap2

  $ cat > splicemap <<EOF
  > $VALIDID1 $VALIDID2, $VALIDID2, $VALIDID2
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap2-hg
  initializing destination git-repo2-splicemap2-hg repository
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap3

  $ cat > splicemap <<EOF
  > $INVALIDID1 $INVALIDID2
  > EOF
  $ hg convert --splicemap splicemap git-repo2 git-repo2-splicemap3-hg
  initializing destination git-repo2-splicemap3-hg repository
  abort: splicemap entry afd12345af is not a valid revision identifier
  [255]

convert sub modules
  $ hg convert git-repo6 git-repo6-hg
  initializing destination git-repo6-hg repository
  scanning source...
  sorting...
  converting...
  0 addsubmodule
  updating bookmarks
  $ hg -R git-repo6-hg log -v
  changeset:   0:* (glob)
  bookmark:    master
  tag:         tip
  user:        nottest <[e-mail]>
  date:        Mon Jan 01 00:00:23 2007 +0000
  files:       .hgsub .hgsubstate
  description:
  addsubmodule
  
  committer: test <[e-mail]>
  
  

  $ cd git-repo6-hg
  $ hg up >/dev/null 2>/dev/null
  $ cat .hgsubstate
  * git-repo5 (glob)
  $ cd git-repo5
  $ cat foo
  sub

  $ cd ../..

make sure rename detection doesn't break removing and adding gitmodules

  $ cd git-repo6
  $ git mv .gitmodules .gitmodules-renamed
  $ commit -a -m 'rename .gitmodules'
  $ git mv .gitmodules-renamed .gitmodules
  $ commit -a -m 'rename .gitmodules back'
  $ cd ..

  $ hg --config convert.git.similarity=100 convert -q git-repo6 git-repo6-hg
  $ hg -R git-repo6-hg log -r 'tip^' -T "{desc|firstline}\n"
  rename .gitmodules
  $ hg -R git-repo6-hg status -C --change 'tip^'
  A .gitmodules-renamed
  R .hgsub
  R .hgsubstate
  $ hg -R git-repo6-hg log -r tip -T "{desc|firstline}\n"
  rename .gitmodules back
  $ hg -R git-repo6-hg status -C --change tip
  A .hgsub
  A .hgsubstate
  R .gitmodules-renamed

convert the revision removing '.gitmodules' itself (and related
submodules)

  $ cd git-repo6
  $ git rm .gitmodules
  rm '.gitmodules'
  $ git rm --cached git-repo5
  rm 'git-repo5'
  $ commit -a -m 'remove .gitmodules and submodule git-repo5'
  $ cd ..

  $ hg convert -q git-repo6 git-repo6-hg
  $ hg -R git-repo6-hg tip -T "{desc|firstline}\n"
  remove .gitmodules and submodule git-repo5
  $ hg -R git-repo6-hg tip -T "{file_dels}\n"
  .hgsub .hgsubstate

damaged git repository tests:
In case the hard-coded hashes change, the following commands can be used to
list the hashes and their corresponding types in the repository:
cd git-repo4/.git/objects
find . -type f | cut -c 3- | sed 's_/__' | xargs -n 1 -t git cat-file -t
cd ../../..

damage git repository by renaming a commit object
  $ COMMIT_OBJ=1c/0ce3c5886f83a1d78a7b517cdff5cf9ca17bdd
  $ mv git-repo4/.git/objects/$COMMIT_OBJ git-repo4/.git/objects/$COMMIT_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot read tags from git-repo4/.git
  $ mv git-repo4/.git/objects/$COMMIT_OBJ.tmp git-repo4/.git/objects/$COMMIT_OBJ
damage git repository by renaming a blob object

  $ BLOB_OBJ=8b/137891791fe96927ad78e64b0aad7bded08bdc
  $ mv git-repo4/.git/objects/$BLOB_OBJ git-repo4/.git/objects/$BLOB_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot read 'blob' object at 8b137891791fe96927ad78e64b0aad7bded08bdc
  $ mv git-repo4/.git/objects/$BLOB_OBJ.tmp git-repo4/.git/objects/$BLOB_OBJ
damage git repository by renaming a tree object

  $ TREE_OBJ=72/49f083d2a63a41cc737764a86981eb5f3e4635
  $ mv git-repo4/.git/objects/$TREE_OBJ git-repo4/.git/objects/$TREE_OBJ.tmp
  $ hg convert git-repo4 git-repo4-broken-hg 2>&1 | grep 'abort:'
  abort: cannot read changes in 1c0ce3c5886f83a1d78a7b517cdff5cf9ca17bdd