Mercurial > hg
view tests/test-convert-splicemap.t @ 24787:9d5c27890790
largefiles: for update -C, only update largefiles when necessary
Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.
Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.
Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.
Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.
| author | Mads Kiilerich <madski@unity3d.com> |
|---|---|
| date | Wed, 15 Apr 2015 15:22:16 -0400 |
| parents | aa9385f983fa |
| children | 58a309e9cf80 |
line wrap: on
line source
$ echo "[extensions]" >> $HGRCPATH $ echo "convert=" >> $HGRCPATH $ glog() > { > hg log -G --template '{rev}:{node|short} "{desc|firstline}"\ > files: {files}\n' "$@" > } $ hg init repo1 $ cd repo1 $ echo a > a $ hg ci -Am adda adding a $ echo b > b $ echo a >> a $ hg ci -Am addb adding b $ PARENTID1=`hg id --debug -i` $ echo c > c $ hg ci -Am addc adding c $ PARENTID2=`hg id --debug -i` $ cd .. $ glog -R repo1 @ 2:e55c719b85b6 "addc" files: c | o 1:6d4c2037ddc2 "addb" files: a b | o 0:07f494440405 "adda" files: a $ hg init repo2 $ cd repo2 $ echo b > a $ echo d > d $ hg ci -Am addaandd adding a adding d $ INVALIDID1=afd12345af $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86 $ CHILDID1=`hg id --debug -i` $ echo d >> d $ hg ci -Am changed $ CHILDID2=`hg id --debug -i` $ echo e > e $ hg ci -Am adde adding e $ cd .. $ glog -R repo2 @ 2:a39b65753b0a "adde" files: e | o 1:e4ea00df9189 "changed" files: d | o 0:527cdedf31fb "addaandd" files: a d test invalid splicemap1 $ cat > splicemap <<EOF > $CHILDID2 > EOF $ hg convert --splicemap splicemap repo2 repo1 abort: syntax error in splicemap(1): child parent1[,parent2] expected [255] test invalid splicemap2 $ cat > splicemap <<EOF > $CHILDID2 $PARENTID1, $PARENTID2, $PARENTID2 > EOF $ hg convert --splicemap splicemap repo2 repo1 abort: syntax error in splicemap(1): child parent1[,parent2] expected [255] test invalid splicemap3 $ cat > splicemap <<EOF > $INVALIDID1 $INVALIDID2 > EOF $ hg convert --splicemap splicemap repo2 repo1 abort: splicemap entry afd12345af is not a valid revision identifier [255] splice repo2 on repo1 $ cat > splicemap <<EOF > $CHILDID1 $PARENTID1 > $CHILDID2 $PARENTID2,$CHILDID1 > > EOF $ cat splicemap 527cdedf31fbd5ea708aa14eeecf53d4676f38db 6d4c2037ddc2cb2627ac3a244ecce35283268f8e e4ea00df91897da3079a10fab658c1eddba6617b e55c719b85b60e5102fac26110ba626e7cb6b7dc,527cdedf31fbd5ea708aa14eeecf53d4676f38db $ hg clone repo1 target1 updating to branch default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg convert --splicemap splicemap repo2 target1 scanning source... sorting... converting... 2 addaandd spliced in ['6d4c2037ddc2cb2627ac3a244ecce35283268f8e'] as parents of 527cdedf31fbd5ea708aa14eeecf53d4676f38db 1 changed spliced in ['e55c719b85b60e5102fac26110ba626e7cb6b7dc', '527cdedf31fbd5ea708aa14eeecf53d4676f38db'] as parents of e4ea00df91897da3079a10fab658c1eddba6617b 0 adde $ glog -R target1 o 5:16bc847b02aa "adde" files: e | o 4:e30e4fee3418 "changed" files: d |\ | o 3:e673348c3a3c "addaandd" files: a d | | @ | 2:e55c719b85b6 "addc" files: c |/ o 1:6d4c2037ddc2 "addb" files: a b | o 0:07f494440405 "adda" files: a Test splicemap and conversion order $ hg init ordered $ cd ordered $ echo a > a $ hg ci -Am adda adding a $ hg branch branch marked working directory as branch branch (branches are permanent and global, did you want a bookmark?) $ echo a >> a $ hg ci -Am changea $ echo a >> a $ hg ci -Am changeaagain $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo b > b $ hg ci -Am addb adding b We want 2 to depend on 1 and 3. Since 3 is always converted after 2, the bug should be exhibited with all conversion orders. $ cat > ../splicemap <<EOF > `(hg id -r 2 -i --debug)` `(hg id -r 1 -i --debug)`, `(hg id -r 3 -i --debug)` > EOF $ cd .. $ cat splicemap 7c364e7fa7d70ae525610c016317ed717b519d97 717d54d67e6c31fd75ffef2ff3042bdd98418437, 102a90ea7b4a3361e4082ed620918c261189a36a Test regular conversion $ hg convert --splicemap splicemap ordered ordered-hg1 initializing destination ordered-hg1 repository scanning source... sorting... converting... 3 adda 2 changea 1 addb 0 changeaagain spliced in ['717d54d67e6c31fd75ffef2ff3042bdd98418437', '102a90ea7b4a3361e4082ed620918c261189a36a'] as parents of 7c364e7fa7d70ae525610c016317ed717b519d97 $ glog -R ordered-hg1 o 3:4cb04b9afbf2 "changeaagain" files: a |\ | o 2:102a90ea7b4a "addb" files: b | | o | 1:717d54d67e6c "changea" files: a |/ o 0:07f494440405 "adda" files: a Test conversion with parent revisions already in dest, using source and destination identifiers. Test unknown splicemap target. $ hg convert -r1 ordered ordered-hg2 initializing destination ordered-hg2 repository scanning source... sorting... converting... 1 adda 0 changea $ hg convert -r3 ordered ordered-hg2 scanning source... sorting... converting... 0 addb $ cat > splicemap <<EOF > `(hg -R ordered id -r 2 -i --debug)` \ > `(hg -R ordered-hg2 id -r 1 -i --debug)`,\ > `(hg -R ordered-hg2 id -r 2 -i --debug)` > deadbeef102a90ea7b4a3361e4082ed620918c26 deadbeef102a90ea7b4a3361e4082ed620918c27 > EOF $ hg convert --splicemap splicemap ordered ordered-hg2 scanning source... splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring sorting... converting... 0 changeaagain spliced in ['717d54d67e6c31fd75ffef2ff3042bdd98418437', '102a90ea7b4a3361e4082ed620918c261189a36a'] as parents of 7c364e7fa7d70ae525610c016317ed717b519d97 $ glog -R ordered-hg2 o 3:4cb04b9afbf2 "changeaagain" files: a |\ | o 2:102a90ea7b4a "addb" files: b | | o | 1:717d54d67e6c "changea" files: a |/ o 0:07f494440405 "adda" files: a Test empty conversion $ hg convert --splicemap splicemap ordered ordered-hg2 scanning source... splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring sorting... converting... Test clonebranches $ hg --config convert.hg.clonebranches=true convert \ > --splicemap splicemap ordered ordered-hg3 initializing destination ordered-hg3 repository scanning source... abort: revision 717d54d67e6c31fd75ffef2ff3042bdd98418437 not found in destination repository (lookups with clonebranches=true are not implemented) [255] Test invalid dependency $ cat > splicemap <<EOF > `(hg -R ordered id -r 2 -i --debug)` \ > deadbeef102a90ea7b4a3361e4082ed620918c26,\ > `(hg -R ordered-hg2 id -r 2 -i --debug)` > EOF $ hg convert --splicemap splicemap ordered ordered-hg4 initializing destination ordered-hg4 repository scanning source... abort: unknown splice map parent: deadbeef102a90ea7b4a3361e4082ed620918c26 [255]