view tests/test-export.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary Before, a --clean update with largefiles would use the "optimization" that it didn't read hashes from standin files before and after the update. Instead of trusting the content of the standin files, it would rehash all the actual largefiles that lfdirstate reported clean and update the standins that didn't have the expected content. It could thus in some "impossible" situations automatically recover from some "largefile got out sync with its standin" issues (even there apparently still were weird corner cases where it could fail). This extra checking is similar to what core --clean intentionally do not do, and it made update --clean unbearable slow. Usually in core Mercurial, --clean will rely on the dirstate to find the files it should update. (It is thus intentionally possible (when trying to trick the system or if there should be bugs) to end up in situations where --clean not will restore the working directory content correctly.) Checking every file when we "know" it is ok is however not an option - that would be too slow. Instead, trust the content of the standin files. Use the same logic for --clean as for linear updates and trust the dirstate and that our "logic" will keep them in sync. It is much cheaper to just rehash the largefiles reported dirty by a status walk and read all standins than to hash largefiles. Most of the changes are just a change of indentation now when the different kinds of updates no longer are handled that differently. Standins for added files are however only written when doing a normal update, while deleted and removed files only will be updated for --clean updates.
author Mads Kiilerich <madski@unity3d.com>
date Wed, 15 Apr 2015 15:22:16 -0400
parents e955549cd045
children 9d04b4da6773
line wrap: on
line source

  $ hg init repo
  $ cd repo
  $ touch foo
  $ hg add foo
  $ for i in 0 1 2 3 4 5 6 7 8 9 10 11; do
  >    echo "foo-$i" >> foo
  >    hg ci -m "foo-$i"
  > done

  $ for out in "%nof%N" "%%%H" "%b-%R" "%h" "%r" "%m"; do
  >    echo
  >    echo "# foo-$out.patch"
  >    hg export -v -o "foo-$out.patch" 2:tip
  > done
  
  # foo-%nof%N.patch
  exporting patches:
  foo-01of10.patch
  foo-02of10.patch
  foo-03of10.patch
  foo-04of10.patch
  foo-05of10.patch
  foo-06of10.patch
  foo-07of10.patch
  foo-08of10.patch
  foo-09of10.patch
  foo-10of10.patch
  
  # foo-%%%H.patch
  exporting patches:
  foo-%617188a1c80f869a7b66c85134da88a6fb145f67.patch
  foo-%dd41a5ff707a5225204105611ba49cc5c229d55f.patch
  foo-%f95a5410f8664b6e1490a4af654e4b7d41a7b321.patch
  foo-%4346bcfde53b4d9042489078bcfa9c3e28201db2.patch
  foo-%afda8c3a009cc99449a05ad8aa4655648c4ecd34.patch
  foo-%35284ce2b6b99c9d2ac66268fe99e68e1974e1aa.patch
  foo-%9688c41894e6931305fa7165a37f6568050b4e9b.patch
  foo-%747d3c68f8ec44bb35816bfcd59aeb50b9654c2f.patch
  foo-%5f17a83f5fbd9414006a5e563eab4c8a00729efd.patch
  foo-%f3acbafac161ec68f1598af38f794f28847ca5d3.patch
  
  # foo-%b-%R.patch
  exporting patches:
  foo-repo-2.patch
  foo-repo-3.patch
  foo-repo-4.patch
  foo-repo-5.patch
  foo-repo-6.patch
  foo-repo-7.patch
  foo-repo-8.patch
  foo-repo-9.patch
  foo-repo-10.patch
  foo-repo-11.patch
  
  # foo-%h.patch
  exporting patches:
  foo-617188a1c80f.patch
  foo-dd41a5ff707a.patch
  foo-f95a5410f866.patch
  foo-4346bcfde53b.patch
  foo-afda8c3a009c.patch
  foo-35284ce2b6b9.patch
  foo-9688c41894e6.patch
  foo-747d3c68f8ec.patch
  foo-5f17a83f5fbd.patch
  foo-f3acbafac161.patch
  
  # foo-%r.patch
  exporting patches:
  foo-02.patch
  foo-03.patch
  foo-04.patch
  foo-05.patch
  foo-06.patch
  foo-07.patch
  foo-08.patch
  foo-09.patch
  foo-10.patch
  foo-11.patch
  
  # foo-%m.patch
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  foo-foo_4.patch
  foo-foo_5.patch
  foo-foo_6.patch
  foo-foo_7.patch
  foo-foo_8.patch
  foo-foo_9.patch
  foo-foo_10.patch
  foo-foo_11.patch

Doing it again clobbers the files rather than appending:
  $ hg export -v -o "foo-%m.patch" 2:3
  exporting patches:
  foo-foo_2.patch
  foo-foo_3.patch
  $ grep HG foo-foo_2.patch | wc -l
  \s*1 (re)
  $ grep HG foo-foo_3.patch | wc -l
  \s*1 (re)

Exporting 4 changesets to a file:

  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Doing it again clobbers the file rather than appending:
  $ hg export -o export_internal 1 2 3 4
  $ grep HG export_internal | wc -l
  \s*4 (re)

Exporting 4 changesets to stdout:

  $ hg export 1 2 3 4 | grep HG | wc -l
  \s*4 (re)

Exporting revision -2 to a file:

  $ hg export -- -2
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 5f17a83f5fbd9414006a5e563eab4c8a00729efd
  # Parent  747d3c68f8ec44bb35816bfcd59aeb50b9654c2f
  foo-10
  
  diff -r 747d3c68f8ec -r 5f17a83f5fbd foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -8,3 +8,4 @@
   foo-7
   foo-8
   foo-9
  +foo-10

Checking if only alphanumeric characters are used in the file name (%m option):

  $ echo "line" >> foo
  $ hg commit -m " !\"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_\`abcdefghijklmnopqrstuvwxyz{|}~"
  $ hg export -v -o %m.patch tip
  exporting patch:
  ____________0123456789_______ABCDEFGHIJKLMNOPQRSTUVWXYZ______abcdefghijklmnopqrstuvwxyz____.patch

Catch exporting unknown revisions (especially empty revsets, see issue3353)

  $ hg export
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID 197ecd81a57f760b54f34a58817ad5b04991fa47
  # Parent  f3acbafac161ec68f1598af38f794f28847ca5d3
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  diff -r f3acbafac161 -r 197ecd81a57f foo
  --- a/foo	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -10,3 +10,4 @@
   foo-9
   foo-10
   foo-11
  +line

  $ hg export ""
  hg: parse error: empty query
  [255]
  $ hg export 999
  abort: unknown revision '999'!
  [255]
  $ hg export "not all()"
  abort: export requires at least one changeset
  [255]

Check for color output
  $ cat <<EOF >> $HGRCPATH
  > [color]
  > mode = ansi
  > [extensions]
  > color =
  > EOF

  $ hg export --color always --nodates tip
  # HG changeset patch
  # User test
  # Date 0 0
  #      Thu Jan 01 00:00:00 1970 +0000
  # Node ID * (glob)
  # Parent * (glob)
   !"#$%&(,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
  
  \x1b[0;1mdiff -r f3acbafac161 -r 197ecd81a57f foo\x1b[0m (esc)
  \x1b[0;31;1m--- a/foo\x1b[0m (esc)
  \x1b[0;32;1m+++ b/foo\x1b[0m (esc)
  \x1b[0;35m@@ -10,3 +10,4 @@\x1b[0m (esc)
   foo-9
   foo-10
   foo-11
  \x1b[0;32m+line\x1b[0m (esc)


  $ cd ..