view tests/test-fetch.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require serve

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "fetch=" >> $HGRCPATH

test fetch with default branches only

  $ hg init a
  $ echo a > a/a
  $ hg --cwd a commit -Ama
  adding a
  $ hg clone a b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone a c
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > a/b
  $ hg --cwd a commit -Amb
  adding b
  $ hg --cwd a parents -q
  1:d2ae7f538514

should pull one change

  $ hg --cwd b fetch ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg --cwd b parents -q
  1:d2ae7f538514
  $ echo c > c/c
  $ hg --cwd c commit -Amc
  adding c
  $ hg clone c d
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone c e
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

We cannot use the default commit message if fetching from a local
repo, because the path of the repo will be included in the commit
message, making every commit appear different.
should merge c into a

  $ hg --cwd c fetch -d '0 0' -m 'automated merge' ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 3:a323a0c43ec4 merges remote changes with local
  $ ls c
  a
  b
  c
  $ hg --cwd a serve -a localhost -p $HGPORT -d --pid-file=hg.pid
  $ cat a/hg.pid >> "$DAEMON_PIDS"

fetch over http, no auth
(this also tests that editor is invoked if '--edit' is specified)

  $ HGEDITOR=cat hg --cwd d fetch --edit http://localhost:$HGPORT/
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  Automated merge with http://localhost:$HGPORT/
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch merge
  HG: branch 'default'
  HG: changed c
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd d tip --template '{desc}\n'
  Automated merge with http://localhost:$HGPORT/
  $ hg --cwd d status --rev 'tip^1' --rev tip
  A c
  $ hg --cwd d status --rev 'tip^2' --rev tip
  A b

fetch over http with auth (should be hidden in desc)
(this also tests that editor is not invoked if '--edit' is not
specified, even though commit message is not specified explicitly)

  $ HGEDITOR=cat hg --cwd e fetch http://user:password@localhost:$HGPORT/
  pulling from http://user:***@localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  updating to 2:d2ae7f538514
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 1:d36c0562f908
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd e tip --template '{desc}\n'
  Automated merge with http://localhost:$HGPORT/
  $ hg clone a f
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone a g
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo f > f/f
  $ hg --cwd f ci -Amf
  adding f
  $ echo g > g/g
  $ hg --cwd g ci -Amg
  adding g
  $ hg clone -q f h
  $ hg clone -q g i

should merge f into g

  $ hg --cwd g fetch -d '0 0' --switch -m 'automated merge' ../f
  pulling from ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging with 3:6343ca3eff20
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 4:f7faa0b7d3c6 merges remote changes with local
  $ rm i/g

should abort, because i is modified

  $ hg --cwd i fetch ../h
  abort: uncommitted changes
  [255]

test fetch with named branches

  $ hg init nbase
  $ echo base > nbase/a
  $ hg -R nbase ci -Am base
  adding a
  $ hg -R nbase branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ echo a > nbase/a
  $ hg -R nbase ci -m a
  $ hg -R nbase up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R nbase branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > nbase/b
  $ hg -R nbase ci -Am b
  adding b

pull in change on foreign branch

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aa > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

parent should be 2 (no automatic update)

  $ hg -R n2 parents --template '{rev}\n'
  2
  $ rm -fr n1 n2

pull in changes on both foreign and local branches

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aa > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n1 up -C b
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo bb > n1/b
  $ hg -R n1 ci -m b1
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

parent should be 4 (fast forward)

  $ hg -R n2 parents --template '{rev}\n'
  4
  $ rm -fr n1 n2

pull changes on foreign (2 new heads) and local (1 new head) branches
with a local change

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > n1/a
  $ hg -R n1 ci -m a1
  $ hg -R n1 up -C b
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo bb > n1/b
  $ hg -R n1 ci -m b1
  $ hg -R n1 up -C 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a2 > n1/a
  $ hg -R n1 ci -m a2
  created new head
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo change >> n2/c
  $ hg -R n2 ci -A -m local
  adding c
  $ hg -R n2 fetch -d '0 0' -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files (+2 heads)
  updating to 5:3c4a837a864f
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  merging with 3:1267f84a9ea5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  new changeset 7:2cf2a1261f21 merges remote changes with local

parent should be 7 (new merge changeset)

  $ hg -R n2 parents --template '{rev}\n'
  7
  $ rm -fr n1 n2

pull in changes on foreign (merge of local branch) and local (2 new
heads) with a local change

  $ hg clone nbase n1
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone nbase n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 up -C a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R n1 merge b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg -R n1 ci -m merge
  $ hg -R n1 up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c > n1/a
  $ hg -R n1 ci -m c
  $ hg -R n1 up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo cc > n1/a
  $ hg -R n1 ci -m cc
  created new head
  $ hg -R n2 up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo change >> n2/b
  $ hg -R n2 ci -A -m local
  $ hg -R n2 fetch -m 'merge' n1
  pulling from n1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 1 files (+2 heads)
  not merging with 1 other new branch heads (use "hg heads ." and "hg merge" to merge them)
  [1]

parent should be 3 (fetch did not merge anything)

  $ hg -R n2 parents --template '{rev}\n'
  3
  $ rm -fr n1 n2

pull in change on different branch than dirstate

  $ hg init n1
  $ echo a > n1/a
  $ hg -R n1 ci -Am initial
  adding a
  $ hg clone n1 n2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > n1/a
  $ hg -R n1 ci -m next
  $ hg -R n2 branch topic
  marked working directory as branch topic
  (branches are permanent and global, did you want a bookmark?)
  $ hg -R n2 fetch -m merge n1
  abort: working directory not at branch tip
  (use "hg update" to check out branch tip)
  [255]

parent should be 0 (fetch did not update or merge anything)

  $ hg -R n2 parents --template '{rev}\n'
  0
  $ rm -fr n1 n2

test fetch with inactive branches

  $ hg init ib1
  $ echo a > ib1/a
  $ hg --cwd ib1 ci -Am base
  adding a
  $ hg --cwd ib1 branch second
  marked working directory as branch second
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > ib1/b
  $ hg --cwd ib1 ci -Am onsecond
  adding b
  $ hg --cwd ib1 branch -f default
  marked working directory as branch default
  (branches are permanent and global, did you want a bookmark?)
  $ echo c > ib1/c
  $ hg --cwd ib1 ci -Am newdefault
  adding c
  created new head
  $ hg clone ib1 ib2
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

fetch should succeed

  $ hg --cwd ib2 fetch ../ib1
  pulling from ../ib1
  searching for changes
  no changes found
  $ rm -fr ib1 ib2

test issue1726

  $ hg init i1726r1
  $ echo a > i1726r1/a
  $ hg --cwd i1726r1 ci -Am base
  adding a
  $ hg clone i1726r1 i1726r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > i1726r1/a
  $ hg --cwd i1726r1 ci -m second
  $ echo c > i1726r2/a
  $ hg --cwd i1726r2 ci -m third
  $ HGMERGE=true hg --cwd i1726r2 fetch ../i1726r1
  pulling from ../i1726r1
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  updating to 2:7837755a2789
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging with 1:d1f0c6c48ebd
  merging a
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  new changeset 3:* merges remote changes with local (glob)
  $ hg --cwd i1726r2 heads default --template '{rev}\n'
  3

test issue2047

  $ hg -q init i2047a
  $ cd i2047a
  $ echo a > a
  $ hg -q ci -Am a
  $ hg -q branch stable
  $ echo b > b
  $ hg -q ci -Am b
  $ cd ..
  $ hg -q clone -r 0 i2047a i2047b
  $ cd i2047b
  $ hg fetch ../i2047a
  pulling from ../i2047a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

  $ cd ..