Mercurial > hg
view tests/test-http.t @ 24787:9d5c27890790
largefiles: for update -C, only update largefiles when necessary
Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.
Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.
Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.
Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.
author | Mads Kiilerich <madski@unity3d.com> |
---|---|
date | Wed, 15 Apr 2015 15:22:16 -0400 |
parents | d283517b260b |
children | 6f15114bdcc3 |
line wrap: on
line source
#require serve $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused #if windows $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': * (glob) [255] #else $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': Address already in use [255] #endif $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions try to clone via stream, should use pull instead $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2 requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ echo '[hooks]' >> .hg/hgrc $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=http://localhost:$HGPORT1/ (glob) (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ cat << EOT > userpass.py > import base64 > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > auth = req.env.get('HTTP_AUTHORIZATION') > if not auth: > raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who', > [('WWW-Authenticate', 'Basic Realm="mercurial"')]) > if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']: > raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no') > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOT $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \ > --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF #if python243 $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 #endif $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 #if python243 $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved --pull should override server's preferuncompressed $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest tag -r tip top $ hg -R dest push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ cut -c38- ../access.log "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=stream_out HTTP/1.1" 401 - "GET /?cmd=stream_out HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases #endif $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] check error log $ cat error.log