view tests/test-init.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

This test tries to exercise the ssh functionality with a dummy script

  $ checknewrepo()
  > {
  >    name=$1
  >    if [ -d "$name"/.hg/store ]; then
  >    echo store created
  >    fi
  >    if [ -f "$name"/.hg/00changelog.i ]; then
  >    echo 00changelog.i created
  >    fi
  >    cat "$name"/.hg/requires
  > }

creating 'local'

  $ hg init local
  $ checknewrepo local
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store
  $ echo this > local/foo
  $ hg ci --cwd local -A -m "init"
  adding foo

test custom revlog chunk cache sizes

  $ hg --config format.chunkcachesize=0 log -R local -pv
  abort: revlog chunk cache size 0 is not greater than 0!
  [255]
  $ hg --config format.chunkcachesize=1023 log -R local -pv
  abort: revlog chunk cache size 1023 is not a power of 2!
  [255]
  $ hg --config format.chunkcachesize=1024 log -R local -pv
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo
  description:
  init
  
  
  diff -r 000000000000 -r 08b9e9f63b32 foo
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/foo	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +this
  

creating repo with format.usestore=false

  $ hg --config format.usestore=false init old
  $ checknewrepo old
  revlogv1

creating repo with format.usefncache=false

  $ hg --config format.usefncache=false init old2
  $ checknewrepo old2
  store created
  00changelog.i created
  revlogv1
  store

creating repo with format.dotencode=false

  $ hg --config format.dotencode=false init old3
  $ checknewrepo old3
  store created
  00changelog.i created
  fncache
  revlogv1
  store

test failure

  $ hg init local
  abort: repository local already exists!
  [255]

init+push to remote2

  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  $ hg incoming -R remote2 local
  comparing with local
  changeset:   0:08b9e9f63b32
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     init
  

  $ hg push -R local -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2
  pushing to ssh://user@dummy/remote2
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

clone to remote1

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files

init to existing repo

  $ hg init -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

clone to existing repo

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1
  abort: repository remote1 already exists!
  abort: could not create remote repo!
  [255]

output of dummyssh

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg init remote2
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio
  Got arguments 1:user@dummy 2:hg init remote1
  Got arguments 1:user@dummy 2:hg init remote1

comparing repositories

  $ hg tip -q -R local
  0:08b9e9f63b32
  $ hg tip -q -R remote1
  0:08b9e9f63b32
  $ hg tip -q -R remote2
  0:08b9e9f63b32

check names for repositories (clashes with URL schemes, special chars)

  $ for i in bundle file hg http https old-http ssh static-http "with space"; do
  >   printf "hg init \"$i\"... "
  >   hg init "$i"
  >   test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed"
  > done
  hg init "bundle"... ok
  hg init "file"... ok
  hg init "hg"... ok
  hg init "http"... ok
  hg init "https"... ok
  hg init "old-http"... ok
  hg init "ssh"... ok
  hg init "static-http"... ok
  hg init "with space"... ok
#if eol-in-paths
/* " " is not a valid name for a directory on Windows */
  $ hg init " "
  $ test -d " "
  $ test -d " /.hg"
#endif

creating 'local/sub/repo'

  $ hg init local/sub/repo
  $ checknewrepo local/sub/repo
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

prepare test of init of url configured from paths

  $ echo '[paths]' >> $HGRCPATH
  $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
  $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

init should (for consistency with clone) expand the url

  $ hg init somewhere
  $ checknewrepo "url from paths"
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

verify that clone also expand urls

  $ hg clone somewhere elsewhere
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ checknewrepo "another paths url"
  store created
  00changelog.i created
  dotencode
  fncache
  revlogv1
  store

clone bookmarks

  $ hg -R local bookmark test
  $ hg -R local bookmarks
   * test                      0:08b9e9f63b32
  $ hg clone -e "python \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  exporting bookmark test
  $ hg -R remote-bookmarks bookmarks
     test                      0:08b9e9f63b32