view tests/test-mq-guards.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init
  $ hg qinit

  $ echo x > x
  $ hg ci -Ama
  adding x

  $ hg qnew a.patch
  $ echo a > a
  $ hg add a
  $ hg qrefresh

  $ hg qnew b.patch
  $ echo b > b
  $ hg add b
  $ hg qrefresh

  $ hg qnew c.patch
  $ echo c > c
  $ hg add c
  $ hg qrefresh

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty


should fail

  $ hg qguard does-not-exist.patch +bleh
  abort: no patch named does-not-exist.patch
  [255]


should fail

  $ hg qguard +fail
  abort: no patches applied
  [255]

  $ hg qpush
  applying a.patch
  now at: a.patch

should guard a.patch

  $ hg qguard +a

should print +a

  $ hg qguard
  a.patch: +a
  $ hg qpop
  popping a.patch
  patch queue now empty


should fail

  $ hg qpush a.patch
  cannot push 'a.patch' - guarded by '+a'
  [1]

  $ hg qguard a.patch
  a.patch: +a

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

test selection of an empty guard

  $ hg qselect ""
  abort: guard cannot be an empty string
  [255]
  $ hg qselect a
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch

  $ hg qpush
  applying a.patch
  now at: a.patch

  $ hg qguard -- c.patch -a

should print -a

  $ hg qguard c.patch
  c.patch: -a


should skip c.patch

  $ hg qpush -a
  applying b.patch
  skipping c.patch - guarded by '-a'
  now at: b.patch
  $ hg qnext
  all patches applied
  [1]

should display b.patch

  $ hg qtop
  b.patch

  $ hg qguard -n c.patch

should push c.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty
  $ hg qselect -n
  guards deactivated
  number of unguarded, unapplied patches has changed from 3 to 2

should push all

  $ hg qpush -a
  applying b.patch
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty
  $ hg qguard a.patch +1
  $ hg qguard b.patch +2
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2

should push a.patch, not b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying c.patch
  now at: c.patch
  $ hg qpop -a
  popping c.patch
  popping a.patch
  patch queue now empty

  $ hg qselect 2

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qprev
  b.patch

Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.

  $ hg qtop
  c.patch
  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty

  $ hg qselect 1 2
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch, b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpop -a
  popping b.patch
  popping a.patch
  patch queue now empty

  $ hg qguard -- a.patch +1 +2 -3
  $ hg qselect 1 2 3
  number of unguarded, unapplied patches has changed from 3 to 2


list patches and guards

  $ hg qguard -l
  a.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

have at least one patch applied to test coloring

  $ hg qpush
  applying b.patch
  now at: b.patch

list patches and guards with color

  $ hg --config extensions.color= qguard --config color.mode=ansi \
  >     -l --color=always
  \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
  \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
  \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)

should pop b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

list series

  $ hg qseries -v
  0 G a.patch
  1 U b.patch
  2 U c.patch

list guards

  $ hg qselect
  1
  2
  3

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qselect -n --reapply -v
  guards deactivated
  popping guarded patches
  popping c.patch
  popping b.patch
  patch queue now empty
  reapplying unguarded patches
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  applying c.patch
  patching file c
  adding c
  committing files:
  c
  committing manifest
  committing changelog
  now at: c.patch

guards in series file: +1 +2 -3

  $ hg qselect -s
  +1
  +2
  -3

should show c.patch

  $ hg qapplied
  c.patch

  $ hg qrename a.patch new.patch

should show :


new.patch: +1 +2 -3


b.patch: +2


c.patch: unguarded

  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

  $ hg qnew d.patch
  $ hg qpop
  popping d.patch
  now at: c.patch

should show new.patch and b.patch as Guarded, c.patch as Applied


and d.patch as Unapplied

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 U d.patch

qseries again, but with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
  0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
  1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
  2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
  3 U \x1b[0;30;1md.patch\x1b[0m (esc)

  $ hg qguard d.patch +2

new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 G d.patch

  $ qappunappv()
  > {
  >     for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
  >         echo % hg $command
  >         hg $command
  >     done
  > }

  $ hg qpop -a
  popping c.patch
  patch queue now empty
  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded
  d.patch: +2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  c.patch
  % hg qunapplied -v
  0 G new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  new.patch
  c.patch
  % hg qunapplied -v
  0 U new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qpush -a
  applying new.patch
  skipping b.patch - guarded by '+2'
  applying c.patch
  skipping d.patch - guarded by '+2'
  now at: c.patch
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 G b.patch
  2 A c.patch
  % hg qunapplied
  % hg qunapplied -v
  3 G d.patch
  $ hg qselect 2
  number of unguarded, unapplied patches has changed from 0 to 1
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 U b.patch
  2 A c.patch
  % hg qunapplied
  d.patch
  % hg qunapplied -v
  3 U d.patch

  $ for patch in `hg qseries`; do
  >     echo % hg qapplied $patch
  >     hg qapplied $patch
  >     echo % hg qunapplied $patch
  >     hg qunapplied $patch
  > done
  % hg qapplied new.patch
  new.patch
  % hg qunapplied new.patch
  b.patch
  d.patch
  % hg qapplied b.patch
  new.patch
  % hg qunapplied b.patch
  d.patch
  % hg qapplied c.patch
  new.patch
  c.patch
  % hg qunapplied c.patch
  d.patch
  % hg qapplied d.patch
  new.patch
  c.patch
  % hg qunapplied d.patch


hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past

  $ hg qdelete -k b.patch
  $ hg qseries -m
  b.patch

hg qseries -m with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
  \x1b[0;31;1mb.patch\x1b[0m (esc)


excercise corner cases in "qselect --reapply"

  $ hg qpop -a
  popping c.patch
  popping new.patch
  patch queue now empty
  $ hg qguard -- new.patch -not-new
  $ hg qguard -- c.patch -not-c
  $ hg qguard -- d.patch -not-d
  $ hg qpush -a
  applying new.patch
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qguard -l
  new.patch: -not-new
  c.patch: -not-c
  d.patch: -not-d
  $ hg qselect --reapply not-d
  popping guarded patches
  popping d.patch
  now at: c.patch
  reapplying unguarded patches
  cannot push 'd.patch' - guarded by '-not-d'
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 G d.patch
  $ hg qselect --reapply -n
  guards deactivated
  $ hg qpush
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 A d.patch
  $ hg qselect --reapply not-c
  popping guarded patches
  popping d.patch
  popping c.patch
  now at: new.patch
  reapplying unguarded patches
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 G c.patch
  2 A d.patch
  $ hg qselect --reapply not-new
  popping guarded patches
  popping d.patch
  popping new.patch
  patch queue now empty
  reapplying unguarded patches
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 G new.patch
  1 A c.patch
  2 A d.patch

test that qselect shows "number of guarded, applied patches" correctly

  $ hg qimport -q -e b.patch
  adding b.patch to series file
  $ hg qguard -- b.patch -not-b
  $ hg qpop -a -q
  patch queue now empty
  $ hg qunapplied -v
  0 G new.patch
  1 U c.patch
  2 U d.patch
  3 U b.patch
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 3 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch

  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect --none
  guards deactivated
  $ hg qselect not-new not-c not-d
  number of guarded, applied patches has changed from 0 to 1

test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 1 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-c not-b
  now at: d.patch
  cannot push 'b.patch' - guarded by '-not-b'
  $ hg qseries -v
  0 U new.patch
  1 G c.patch
  2 A d.patch
  3 G b.patch

test that "qselect --reapply" checks applied patches correctly when no
applied patches becomes guarded but some of unapplied ones become
unguarded.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c not-d
  number of unguarded, unapplied patches has changed from 2 to 1
  $ hg qpush -q -a
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 G d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-new not-c
  $ hg qseries -v
  0 G new.patch
  1 G c.patch
  2 U d.patch
  3 A b.patch