view tests/test-mq-safety.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'hgext.mq =' >> $HGRCPATH

  $ hg init repo
  $ cd repo

  $ echo foo > foo
  $ hg ci -qAm 'add a file'

  $ hg qinit

  $ hg qnew foo
  $ echo foo >> foo
  $ hg qrefresh -m 'append foo'

  $ hg qnew bar
  $ echo bar >> foo
  $ hg qrefresh -m 'append bar'

Try to operate on public mq changeset

  $ hg qpop
  popping bar
  now at: foo
  $ hg phase --public qbase
  $ echo babar >> foo
  $ hg qref
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo
  $ hg qpop
  abort: popping would remove an immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg qfold bar
  abort: cannot refresh immutable revision
  (see "hg help phases" for details)
  [255]
  $ hg revert -a
  reverting foo

restore state for remaining test

  $ hg qpush
  applying bar
  now at: bar

try to commit on top of a patch

  $ echo quux >> foo
  $ hg ci -m 'append quux'
  abort: cannot commit over an applied mq patch
  [255]


cheat a bit...

  $ mv .hg/patches .hg/patches2
  $ hg ci -m 'append quux'
  $ mv .hg/patches2 .hg/patches


qpop/qrefresh on the wrong revision

  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qpop -n patches
  using patch queue: $TESTTMP/repo/.hg/patches (glob)
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: working directory revision is not qtip
  [255]

  $ hg up -C qtip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop
  abort: popping would remove a revision not managed by this patch queue
  [255]
  $ hg qrefresh
  abort: cannot refresh a revision with children
  [255]
  $ hg tip --template '{rev} {desc}\n'
  3 append quux


qpush warning branchheads

  $ cd ..
  $ hg init branchy
  $ cd branchy
  $ echo q > q
  $ hg add q
  $ hg qnew -f qp
  $ hg qpop
  popping qp
  patch queue now empty
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo c > c
  $ hg ci -Amc
  adding c
  $ hg merge default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mmerge
  $ hg up default
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg log
  changeset:   2:65309210bf4e
  branch:      b
  tag:         tip
  parent:      1:707adb4c8ae1
  parent:      0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     merge
  
  changeset:   1:707adb4c8ae1
  branch:      b
  parent:      -1:000000000000
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     c
  
  changeset:   0:cb9a9f314b8b
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     a
  
  $ hg qpush
  applying qp
  now at: qp

Testing applied patches, push and --force

  $ cd ..
  $ hg init forcepush
  $ cd forcepush
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo a >> a
  $ hg ci -m changea
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > b
  $ hg ci -Am addb
  adding b
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg --cwd .. clone -r 0 forcepush forcepush2
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a >> a
  $ hg qnew patch

Pushing applied patch with --rev without --force

  $ hg push -r . ../forcepush2
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing applied patch with branchhash, without --force

  $ hg push ../forcepush2#default
  pushing to ../forcepush2
  abort: source has mq patches applied
  [255]

Pushing revs excluding applied patch

  $ hg push --new-branch -r 'branch(branch)' -r 2 ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

Pushing applied patch with --force

  $ hg phase --force --secret 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  no changes found (ignored 1 secret changesets)
  [1]
  $ hg phase --draft 'mq()'
  $ hg push --force -r default ../forcepush2
  pushing to ../forcepush2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

  $ cd ..