view tests/test-parseindex2.py @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

"""This unit test primarily tests parsers.parse_index2().

It also checks certain aspects of the parsers module as a whole.
"""

from mercurial import parsers
from mercurial.node import nullid, nullrev
import struct
import subprocess
import sys

# original python implementation
def gettype(q):
    return int(q & 0xFFFF)

def offset_type(offset, type):
    return long(long(offset) << 16 | type)

indexformatng = ">Qiiiiii20s12x"

def py_parseindex(data, inline) :
    s = 64
    cache = None
    index = []
    nodemap =  {nullid: nullrev}
    n = off = 0

    l = len(data) - s
    append = index.append
    if inline:
        cache = (0, data)
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            if e[1] < 0:
                break
            off += e[1] + s
    else:
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            off += s

    e = list(index[0])
    type = gettype(e[0])
    e[0] = offset_type(0, type)
    index[0] = tuple(e)

    # add the magic null revision at -1
    index.append((0, 0, 0, -1, -1, -1, -1, nullid))

    return index, cache

data_inlined = '\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c' \
    '\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff' \
    '\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b' \
    'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95' \
    '\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@' \
    '\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)' \
    '\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9' \
    '\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W' \
    '\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f' \
    '_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06' \
    '\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6' \
    'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1' \
    '&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa' \
    '\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2' \
    '\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01' \
    '\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06' \
    '\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3' \
    '^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc' \
    'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b' \
    '\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4' \
    '\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9' \
    '\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'

data_non_inlined = '\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19' \
    '\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff' \
    '\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d' \
    '\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00' \
    '\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff' \
    '\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh' \
    '\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00' \
    '\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00' \
    '\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n' \
    '\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F' \
    '\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01' \
    '\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1' \
    '\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00' \
    '\x00\x00\x00\x00\x00\x00\x00\x00\x00'

def parse_index2(data, inline):
    index, chunkcache = parsers.parse_index2(data, inline)
    return list(index), chunkcache

def importparsers(hexversion):
    """Import mercurial.parsers with the given sys.hexversion."""
    # The file parsers.c inspects sys.hexversion to determine the version
    # of the currently-running Python interpreter, so we monkey-patch
    # sys.hexversion to simulate using different versions.
    code = ("import sys; sys.hexversion=%s; "
            "import mercurial.parsers" % hexversion)
    cmd = "python -c \"%s\"" % code
    # We need to do these tests inside a subprocess because parser.c's
    # version-checking code happens inside the module init function, and
    # when using reload() to reimport an extension module, "The init function
    # of extension modules is not called a second time"
    # (from http://docs.python.org/2/library/functions.html?#reload).
    p = subprocess.Popen(cmd, shell=True,
                         stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    return p.communicate()  # returns stdout, stderr

def printhexfail(testnumber, hexversion, stdout, expected):
    try:
        hexstring = hex(hexversion)
    except TypeError:
        hexstring = None
    print ("FAILED: version test #%s with Python %s and patched "
           "sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
           (testnumber, sys.version_info, hexversion, hexstring, expected,
            stdout))

def testversionokay(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    if stdout:
        printhexfail(testnumber, hexversion, stdout, expected="no stdout")

def testversionfail(testnumber, hexversion):
    stdout, stderr = importparsers(hexversion)
    # We include versionerrortext to distinguish from other ImportErrors.
    errtext = "ImportError: %s" % parsers.versionerrortext
    if errtext not in stdout:
        printhexfail(testnumber, hexversion, stdout,
                     expected="stdout to contain %r" % errtext)

def makehex(major, minor, micro):
    return int("%x%02x%02x00" % (major, minor, micro), 16)

def runversiontests():
    """Check the version-detection logic when importing parsers."""
    info = sys.version_info
    major, minor, micro = info[0], info[1], info[2]
    # Test same major-minor versions.
    testversionokay(1, makehex(major, minor, micro))
    testversionokay(2, makehex(major, minor, micro + 1))
    # Test different major-minor versions.
    testversionfail(3, makehex(major + 1, minor, micro))
    testversionfail(4, makehex(major, minor + 1, micro))
    testversionfail(5, "'foo'")

def runtest() :
    # Only test the version-detection logic if it is present.
    try:
        parsers.versionerrortext
    except AttributeError:
        pass
    else:
        runversiontests()

    # Check that parse_index2() raises TypeError on bad arguments.
    try:
        parse_index2(0, True)
    except TypeError:
        pass
    else:
        print "Expected to get TypeError."

   # Check parsers.parse_index2() on an index file against the original
   # Python implementation of parseindex, both with and without inlined data.

    py_res_1 = py_parseindex(data_inlined, True)
    c_res_1 = parse_index2(data_inlined, True)

    py_res_2 = py_parseindex(data_non_inlined, False)
    c_res_2 = parse_index2(data_non_inlined, False)

    if py_res_1 != c_res_1:
        print "Parse index result (with inlined data) differs!"

    if py_res_2 != c_res_2:
        print "Parse index result (no inlined data) differs!"

    ix = parsers.parse_index2(data_inlined, True)[0]
    for i, r in enumerate(ix):
        if r[7] == nullid:
            i = -1
        try:
            if ix[r[7]] != i:
                print 'Reverse lookup inconsistent for %r' % r[7].encode('hex')
        except TypeError:
            # pure version doesn't support this
            break

    print "done"

runtest()