view tests/test-setdiscovery.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

Function to test discovery between two repos in both directions, using both the local shortcut
(which is currently not activated by default) and the full remotable protocol:

  $ testdesc() { # revs_a, revs_b, dagdesc
  >     if [ -d foo ]; then rm -rf foo; fi
  >     hg init foo
  >     cd foo
  >     hg debugbuilddag "$3"
  >     hg clone . a $1 --quiet
  >     hg clone . b $2 --quiet
  >     echo
  >     echo "% -- a -> b tree"
  >     hg -R a debugdiscovery b --verbose --old
  >     echo
  >     echo "% -- a -> b set"
  >     hg -R a debugdiscovery b --verbose --debug
  >     echo
  >     echo "% -- b -> a tree"
  >     hg -R b debugdiscovery a --verbose --old
  >     echo
  >     echo "% -- b -> a set"
  >     hg -R b debugdiscovery a --verbose --debug
  >     cd ..
  > }


Small superset:

  $ testdesc '-ra1 -ra2' '-rb1 -rb2 -rb3' '
  > +2:f +1:a1:b1
  > <f +4 :a2
  > +5 :b2
  > <f +3 :b3'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 01241442b3c2 66f7d451a68b b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  all local heads known remotely
  common heads: 01241442b3c2 b5714e113bc0
  local is subset
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 01241442b3c2 b5714e113bc0
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  all remote heads known locally
  common heads: 01241442b3c2 b5714e113bc0
  remote is subset


Many new:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +3:a1 +3:b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: bebd167eb94d
  common heads: bebd167eb94d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: bebd167eb94d
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b bebd167eb94d
  common heads: bebd167eb94d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 2, sample size is: 2
  2 total queries
  common heads: bebd167eb94d


Both sides many new with stub:

  $ testdesc '-ra1 -ra2' '-rb' '
  > +2:f +2:a1 +30 :b
  > <f +30 :a2'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 2dc09a01254d
  common heads: 2dc09a01254d
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: 2dc09a01254d
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 2dc09a01254d 66f7d451a68b
  common heads: 2dc09a01254d
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking initial sample
  searching: 2 queries
  query 2; still undecided: 29, sample size is: 29
  2 total queries
  common heads: 2dc09a01254d


Both many new:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +30 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b


Both many new skewed:

  $ testdesc '-ra' '-rb' '
  > +2:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 51, sample size is: 51
  2 total queries
  common heads: 66f7d451a68b
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 66f7d451a68b
  common heads: 66f7d451a68b
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 31, sample size is: 31
  2 total queries
  common heads: 66f7d451a68b


Both many new on top of long history:

  $ testdesc '-ra' '-rb' '
  > +1000:f +30 :b
  > <f +50 :a'
  
  % -- a -> b tree
  comparing with b
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- a -> b set
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1049, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 31, sample size is: 31
  3 total queries
  common heads: 7ead0cba2838
  
  % -- b -> a tree
  comparing with a
  searching for changes
  unpruned common: 7ead0cba2838
  common heads: 7ead0cba2838
  
  % -- b -> a set
  comparing with a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1029, sample size is: 11
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 15, sample size is: 15
  3 total queries
  common heads: 7ead0cba2838


One with >200 heads, which used to use up all of the sample:

  $ hg init manyheads
  $ cd manyheads
  $ echo "+300:r @a" >dagdesc
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3 *r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3*r+3" >>dagdesc # 20 heads
  $ echo "@b *r+3" >>dagdesc # one more head
  $ hg debugbuilddag <dagdesc
  reading DAG from stdin

  $ hg heads -t --template . | wc -c
  \s*261 (re)

  $ hg clone -b a . a
  adding changesets
  adding manifests
  adding file changes
  added 1340 changesets with 0 changes to 0 files (+259 heads)
  updating to branch a
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg clone -b b . b
  adding changesets
  adding manifests
  adding file changes
  added 304 changesets with 0 changes to 0 files
  updating to branch b
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R a debugdiscovery b --debug --verbose
  comparing with b
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1240, sample size is: 100
  sampling from both directions
  searching: 3 queries
  query 3; still undecided: 1140, sample size is: 200
  sampling from both directions
  searching: 4 queries
  query 4; still undecided: 592, sample size is: 200
  sampling from both directions
  searching: 5 queries
  query 5; still undecided: 292, sample size is: 200
  sampling from both directions
  searching: 6 queries
  query 6; still undecided: 51, sample size is: 51
  6 total queries
  common heads: 3ee37d65064a

Test actual protocol when pulling one new head in addition to common heads

  $ hg clone -U b c
  $ hg -R c id -ir tip
  513314ca8b3a
  $ hg -R c up -qr default
  $ touch c/f
  $ hg -R c ci -Aqm "extra head"
  $ hg -R c id -i
  e64a39e7da8b

  $ hg serve -R c -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg -R b incoming http://localhost:$HGPORT/ -T '{node|short}\n'
  comparing with http://localhost:$HGPORT/
  searching for changes
  e64a39e7da8b

  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
  $ cut -d' ' -f6- access.log | grep -v cmd=known # cmd=known uses random sampling
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D513314ca8b3ae4dac8eec56966265b00fcf866db
  "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=513314ca8b3ae4dac8eec56966265b00fcf866db&heads=e64a39e7da8b0d54bc63e81169aff001c13b3477
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  $ cat errors.log

  $ cd ..


Issue 4438 - test coverage for 3ef893520a85 issues.

  $ mkdir issue4438
  $ cd issue4438
#if false
generate new bundles:
  $ hg init r1
  $ for i in `python $TESTDIR/seq.py 101`; do hg -R r1 up -qr null && hg -R r1 branch -q b$i && hg -R r1 ci -qmb$i; done
  $ hg clone -q r1 r2
  $ for i in `python $TESTDIR/seq.py 10`; do hg -R r1 up -qr null && hg -R r1 branch -q c$i && hg -R r1 ci -qmc$i; done
  $ hg -R r2 branch -q r2change && hg -R r2 ci -qmr2change
  $ hg -R r1 bundle -qa $TESTDIR/bundles/issue4438-r1.hg
  $ hg -R r2 bundle -qa $TESTDIR/bundles/issue4438-r2.hg
#else
use existing bundles:
  $ hg clone -q $TESTDIR/bundles/issue4438-r1.hg r1
  $ hg clone -q $TESTDIR/bundles/issue4438-r2.hg r2
#endif

Set iteration order could cause wrong and unstable results - fixed in 73cfaa348650:

  $ hg -R r1 outgoing r2 -T'{rev} '
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)

The case where all the 'initialsamplesize' samples already were common would
give 'all remote heads known locally' without checking the remaining heads -
fixed in 86c35b7ae300:

  $ cat >> $TESTTMP/unrandomsample.py << EOF
  > import random
  > def sample(population, k):
  >     return sorted(population)[:k]
  > random.sample = sample
  > EOF

  $ cat >> r1/.hg/hgrc << EOF
  > [extensions]
  > unrandomsample = $TESTTMP/unrandomsample.py
  > EOF

  $ hg -R r1 outgoing r2 -T'{rev} '
  comparing with r2
  searching for changes
  101 102 103 104 105 106 107 108 109 110  (no-eol)
  $ cd ..