view tests/test-config.t @ 45894:9dc1351d0b5f

errors: raise ConfigError on failure to parse config file

This replaces two raises of `ParseError` by `ConfigError`, which makes
it so we get the desired exit code when `ui.detailed-exit-code` is
enabled. Because the exceptions include a location, I had to add that
to `ConfigError` as well. I considered making `ConfigError` a subclass
of `ParseError`, but it doesn't feel like it quite passes the "is-a"
test.

I used "config error: " as prefix for these errors instead of the
previous "hg: parse error: ", which seems a little less accurate now
(and, as I've said before, I don't know what the "hg: " part is
supposed to signify anyway). I can easily be convinced to change the
prefix to something else (including "abort: ").

Some of the exceptions raised here mean that we fail to even load the
`ui` object in the `dispatch` module. When that happens, we don't know
to use detailed exit codes, so some tests (e.g. `test-hgrc.t`) still
see exit code 255. I'll try to get back to that later. It should be
possible to give detailed exit codes if at least part of the config
can be read (e.g. when the system-wide one enables detailed exit codes
and the user's config fails to parse).

Differential Revision: https://phab.mercurial-scm.org/D9355

hide outer repo
  $ hg init

Invalid syntax: no value

  $ cat > .hg/hgrc << EOF
  > novaluekey
  > EOF
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: novaluekey
  [30]

Invalid syntax: no key

  $ cat > .hg/hgrc << EOF
  > =nokeyvalue
  > EOF
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [30]

Test hint about invalid syntax from leading white space

  $ cat > .hg/hgrc << EOF
  >  key=value
  > EOF
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  key=value
  [30]

  $ cat > .hg/hgrc << EOF
  >  [section]
  > key=value
  > EOF
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  [section]
  [30]

Reset hgrc

  $ echo > .hg/hgrc

Test case sensitive configuration

  $ cat <<EOF >> $HGRCPATH
  > [Section]
  > KeY = Case Sensitive
  > key = lower case
  > EOF

  $ hg showconfig Section
  Section.KeY=Case Sensitive
  Section.key=lower case

  $ hg showconfig Section -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   },
   {
    "defaultvalue": null,
    "name": "Section.key",
    "source": "*.hgrc:*", (glob)
    "value": "lower case"
   }
  ]
  $ hg showconfig Section.KeY -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   }
  ]
  $ hg showconfig -Tjson | tail -7
   {
    "defaultvalue": null,
    "name": "*", (glob)
    "source": "*", (glob)
    "value": "*" (glob)
   }
  ]

Test config default of various types:

 {"defaultvalue": ""} for -T'json(defaultvalue)' looks weird, but that's
 how the templater works. Unknown keywords are evaluated to "".

 dynamicdefault

  $ hg config --config alias.foo= alias -Tjson
  [
   {
    "name": "alias.foo",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config alias.foo= alias -T'json(defaultvalue)'
  [
   {"defaultvalue": ""}
  ]
  $ hg config --config alias.foo= alias -T'{defaultvalue}\n'
  

 null

  $ hg config --config auth.cookiefile= auth -Tjson
  [
   {
    "defaultvalue": null,
    "name": "auth.cookiefile",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config auth.cookiefile= auth -T'json(defaultvalue)'
  [
   {"defaultvalue": null}
  ]
  $ hg config --config auth.cookiefile= auth -T'{defaultvalue}\n'
  

 false

  $ hg config --config commands.commit.post-status= commands -Tjson
  [
   {
    "defaultvalue": false,
    "name": "commands.commit.post-status",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.commit.post-status= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": false}
  ]
  $ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'
  False

 true

  $ hg config --config format.dotencode= format -Tjson
  [
   {
    "defaultvalue": true,
    "name": "format.dotencode",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config format.dotencode= format -T'json(defaultvalue)'
  [
   {"defaultvalue": true}
  ]
  $ hg config --config format.dotencode= format -T'{defaultvalue}\n'
  True

 bytes

  $ hg config --config commands.resolve.mark-check= commands -Tjson
  [
   {
    "defaultvalue": "none",
    "name": "commands.resolve.mark-check",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": "none"}
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'{defaultvalue}\n'
  none

 empty list

  $ hg config --config commands.show.aliasprefix= commands -Tjson
  [
   {
    "defaultvalue": [],
    "name": "commands.show.aliasprefix",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": []}
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'{defaultvalue}\n'
  

 nonempty list

  $ hg config --config progress.format= progress -Tjson
  [
   {
    "defaultvalue": ["topic", "bar", "number", "estimate"],
    "name": "progress.format",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config progress.format= progress -T'json(defaultvalue)'
  [
   {"defaultvalue": ["topic", "bar", "number", "estimate"]}
  ]
  $ hg config --config progress.format= progress -T'{defaultvalue}\n'
  topic bar number estimate

 int

  $ hg config --config profiling.freq= profiling -Tjson
  [
   {
    "defaultvalue": 1000,
    "name": "profiling.freq",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.freq= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 1000}
  ]
  $ hg config --config profiling.freq= profiling -T'{defaultvalue}\n'
  1000

 float

  $ hg config --config profiling.showmax= profiling -Tjson
  [
   {
    "defaultvalue": 0.999,
    "name": "profiling.showmax",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.showmax= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 0.999}
  ]
  $ hg config --config profiling.showmax= profiling -T'{defaultvalue}\n'
  0.999

Test empty config source:

  $ cat <<EOF > emptysource.py
  > def reposetup(ui, repo):
  >     ui.setconfig(b'empty', b'source', b'value')
  > EOF
  $ cp .hg/hgrc .hg/hgrc.orig
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > emptysource = `pwd`/emptysource.py
  > EOF

  $ hg config --debug empty.source
  read config from: * (glob)
  none: value
  $ hg config empty.source -Tjson
  [
   {
    "defaultvalue": null,
    "name": "empty.source",
    "source": "",
    "value": "value"
   }
  ]

  $ cp .hg/hgrc.orig .hg/hgrc

Test "%unset"

  $ cat >> $HGRCPATH <<EOF
  > [unsettest]
  > local-hgrcpath = should be unset (HGRCPATH)
  > %unset local-hgrcpath
  > 
  > global = should be unset (HGRCPATH)
  > 
  > both = should be unset (HGRCPATH)
  > 
  > set-after-unset = should be unset (HGRCPATH)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [unsettest]
  > local-hgrc = should be unset (.hg/hgrc)
  > %unset local-hgrc
  > 
  > %unset global
  > 
  > both = should be unset (.hg/hgrc)
  > %unset both
  > 
  > set-after-unset = should be unset (.hg/hgrc)
  > %unset set-after-unset
  > set-after-unset = should be set (.hg/hgrc)
  > EOF

  $ hg showconfig unsettest
  unsettest.set-after-unset=should be set (.hg/hgrc)

Test exit code when no config matches

  $ hg config Section.idontexist
  [1]

sub-options in [paths] aren't expanded

  $ cat > .hg/hgrc << EOF
  > [paths]
  > foo = ~/foo
  > foo:suboption = ~/foo
  > EOF

  $ hg showconfig paths
  paths.foo:suboption=~/foo
  paths.foo=$TESTTMP/foo

edit failure

  $ HGEDITOR=false hg config --edit
  abort: edit failed: false exited with status 1
  [10]

config affected by environment variables

  $ EDITOR=e1 VISUAL=e2 hg config --debug | grep 'ui\.editor'
  $VISUAL: ui.editor=e2

  $ VISUAL=e2 hg config --debug --config ui.editor=e3 | grep 'ui\.editor'
  --config: ui.editor=e3

  $ PAGER=p1 hg config --debug | grep 'pager\.pager'
  $PAGER: pager.pager=p1

  $ PAGER=p1 hg config --debug --config pager.pager=p2 | grep 'pager\.pager'
  --config: pager.pager=p2

verify that aliases are evaluated as well

  $ hg init aliastest
  $ cd aliastest
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

alias has lower priority

  $ hg init aliaspriority
  $ cd aliaspriority
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = alias user
  > username = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

configs should be read in lexicographical order

  $ mkdir configs
  $ for i in `$TESTDIR/seq.py 10 99`; do
  >    printf "[section]\nkey=$i" > configs/$i.rc
  > done
  $ HGRCPATH=configs hg config section.key
  99