view tests/test-eol-patch.t @ 34880:9e18ab7f7240

sparse-read: move from a recursive-based approach to a heap-based one

The previous recursive approach was trying to optimise each read slice to have
a good density. It had the tendency to over-optimize smaller slices while
leaving larger hole in others.

The new approach focuses on improving the combined density of all the reads,
instead of the individual slices. It slices at the largest gaps first, as they
reduce the total amount of read data the most efficiently.

Another benefit of this approach is that we iterate over the delta chain only
once, reducing the overhead of slicing long delta chains.

On the repository we use for tests, the new approach shows similar or faster
performance than the current default linear full read.

The repository contains about 450,000 revisions with many concurrent
topological branches. Tests have been run on two versions of the repository:
one built with the current delta constraint, and the other with an unlimited
delta span (using 'experimental.maxdeltachainspan=0')

Below are timings for building 1% of all the revision in the manifest log using
'hg perfrevlogrevisions -m'. Times are given in seconds. They include the new
couple of follow-up changeset in this series.

delta-span  standard    unlimited
linear-read     922s         632s
sparse-read     814s         566s

Test EOL patching

  $ cat >> $HGRCPATH <<EOF
  > [diff]
  > git = 1
  > EOF

Set up helpers

  $ seteol () {
  >     if [ $1 = "LF" ]; then
  >         EOL='\n'
  >     else
  >         EOL='\r\n'
  >     fi
  > }

  $ makerepo () {
  >     seteol $1
  >     echo
  >     echo "# ==== setup $1 repository ===="
  >     echo '% hg init'
  >     hg init repo
  >     cd repo
  >     cat > .hgeol <<EOF
  > [repository]
  > native = $1
  > [patterns]
  > unix.txt = LF
  > win.txt = CRLF
  > **.txt = native
  > EOF
  >     printf "first\r\nsecond\r\nthird\r\n" > win.txt
  >     printf "first\nsecond\nthird\n" > unix.txt
  >     printf "first${EOL}second${EOL}third${EOL}" > native.txt
  >     hg commit --addremove -m 'checkin'
  >     cd ..
  > }

  $ dotest () {
  >     seteol $1
  >     echo
  >     echo "% hg clone repo repo-$1"
  >     hg clone --noupdate repo repo-$1
  >     cd repo-$1
  >     cat > .hg/hgrc <<EOF
  > [extensions]
  > eol =
  > [eol]
  > native = $1
  > EOF
  >     hg update
  >     echo '% native.txt'
  >     cat native.txt
  >     echo '% unix.txt'
  >     cat unix.txt
  >     echo '% win.txt'
  >     cat win.txt
  >     printf "first${EOL}third${EOL}" > native.txt
  >     printf "first\r\nthird\r\n" > win.txt
  >     printf "first\nthird\n" > unix.txt
  >     echo '% hg diff'
  >     hg diff > p
  >     cat p
  >     echo '% hg revert'
  >     hg revert --all
  >     echo '% hg import'
  >     hg import -m 'patch' p
  >     echo '% native.txt'
  >     cat native.txt
  >     echo '% unix.txt'
  >     cat unix.txt
  >     echo '% win.txt'
  >     cat win.txt
  >     echo '% hg diff -c tip'
  >     hg diff -c tip
  >     cd ..
  >     rm -r repo-$1
  > }

Run tests

  $ makerepo LF
  
  # ==== setup LF repository ====
  % hg init
  adding .hgeol
  adding native.txt
  adding unix.txt
  adding win.txt
  $ dotest LF
  
  % hg clone repo repo-LF
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % native.txt
  first
  second
  third
  % unix.txt
  first
  second
  third
  % win.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg diff
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  % hg revert
  reverting native.txt
  reverting unix.txt
  reverting win.txt
  % hg import
  applying p
  % native.txt
  first
  third
  % unix.txt
  first
  third
  % win.txt
  first\r (esc)
  third\r (esc)
  % hg diff -c tip
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  $ dotest CRLF
  
  % hg clone repo repo-CRLF
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % native.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % unix.txt
  first
  second
  third
  % win.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg diff
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  % hg revert
  reverting native.txt
  reverting unix.txt
  reverting win.txt
  % hg import
  applying p
  % native.txt
  first\r (esc)
  third\r (esc)
  % unix.txt
  first
  third
  % win.txt
  first\r (esc)
  third\r (esc)
  % hg diff -c tip
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  $ rm -r repo
  $ makerepo CRLF
  
  # ==== setup CRLF repository ====
  % hg init
  adding .hgeol
  adding native.txt
  adding unix.txt
  adding win.txt
  $ dotest LF
  
  % hg clone repo repo-LF
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % native.txt
  first
  second
  third
  % unix.txt
  first
  second
  third
  % win.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg diff
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  % hg revert
  reverting native.txt
  reverting unix.txt
  reverting win.txt
  % hg import
  applying p
  % native.txt
  first
  third
  % unix.txt
  first
  third
  % win.txt
  first\r (esc)
  third\r (esc)
  % hg diff -c tip
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  $ dotest CRLF
  
  % hg clone repo repo-CRLF
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % native.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % unix.txt
  first
  second
  third
  % win.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg diff
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  % hg revert
  reverting native.txt
  reverting unix.txt
  reverting win.txt
  % hg import
  applying p
  % native.txt
  first\r (esc)
  third\r (esc)
  % unix.txt
  first
  third
  % win.txt
  first\r (esc)
  third\r (esc)
  % hg diff -c tip
  diff --git a/native.txt b/native.txt
  --- a/native.txt
  +++ b/native.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  diff --git a/unix.txt b/unix.txt
  --- a/unix.txt
  +++ b/unix.txt
  @@ -1,3 +1,2 @@
   first
  -second
   third
  diff --git a/win.txt b/win.txt
  --- a/win.txt
  +++ b/win.txt
  @@ -1,3 +1,2 @@
   first\r (esc)
  -second\r (esc)
   third\r (esc)
  $ rm -r repo