view tests/test-encoding-align.t @ 26750:9f9ec4abe700

cmdutil: make in-memory changes visible to external editor (issue4378)

Before this patch, external editor process for the commit log can't
view some in-memory changes (especially, of dirstate), because they
aren't written out until the end of transaction (or wlock).

This causes unexpected output of Mercurial commands spawned from that
editor process.

To make in-memory changes visible to external editor process, this
patch does:

  - write (or schedule to write) in-memory dirstate changes, and
  - set HG_PENDING environment variable, if:
    - a transaction is running, and
    - there are in-memory changes to be visible

"hg diff" spawned from external editor process for "hg qrefresh"
shows:

  - "changes newly imported into the topmost" before 49148d7868df(*)
  - "all changes recorded in the topmost by refreshing" after this patch

(*) 49148d7868df changed steps invoking editor process

Even though backward compatibility may be broken, the latter behavior
looks reasonable, because "hg diff" spawned from the editor process
consistently shows "what changes new revision records" regardless of
invocation context.

In fact, issue4378 itself should be resolved by 800e090e9c64, which
made 'repo.transaction()' write in-memory dirstate changes out
explicitly before starting transaction. It also made "hg qrefresh"
imply 'dirstate.write()' before external editor invocation in call
chain below.

  - mq.queue.refresh
    - strip.strip
      - repair.strip
        - localrepository.transaction
          - dirstate.write
    - localrepository.commit
      - invoke external editor

Though, this patch has '(issue4378)' in own summary line to indicate
that issues like issue4378 should be fixed by this.

BTW, this patch adds '-m' option to a 'hg ci --amend' execution in
'test-commit-amend.t', to avoid invoking external editor process.

In this case, "unsure" states may be changed to "clean" according to
timestamp or so on. These changes should be written into pending file,
if external editor invocation is required,

Then, writing dirstate changes out breaks stability of test, because
it shows "transaction abort!/rollback completed" occasionally.

Aborting after editor process invocation while commands below may
cause similar instability of tests, too (AFAIK, there is no more such
one, at this revision)

  - commit --amend
    - without --message/--logfile

  - import
    - without --message/--logfile,
    - without --no-commit,
    - without --bypass,
    - one of below, and
      - patch has no description text, or
      - with --edit
    - aborting at the 1st patch, which adds or removes file(s)
      - if it only changes existing files, status is checked only for
        changed files by 'scmutil.matchfiles()', and transition from
        "unsure" to "normal" in dirstate doesn't occur (= dirstate
        isn't changed, and written out)
      - aborting at the 2nd or later patch implies other pending
        changes (e.g. changelog), and always causes showing
        "transaction abort!/rollback completed"

Test alignment of multibyte characters

  $ HGENCODING=utf-8
  $ export HGENCODING
  $ hg init t
  $ cd t
  $ python << EOF
  > # (byte, width) = (6, 4)
  > s = "\xe7\x9f\xad\xe5\x90\x8d"
  > # (byte, width) = (7, 7): odd width is good for alignment test
  > m = "MIDDLE_"
  > # (byte, width) = (18, 12)
  > l = "\xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d"
  > f = file('s', 'w'); f.write(s); f.close()
  > f = file('m', 'w'); f.write(m); f.close()
  > f = file('l', 'w'); f.write(l); f.close()
  > # instant extension to show list of options
  > f = file('showoptlist.py', 'w'); f.write("""# encoding: utf-8
  > from mercurial import cmdutil
  > cmdtable = {}
  > command = cmdutil.command(cmdtable)
  > 
  > @command('showoptlist',
  >     [('s', 'opt1', '', 'short width'  + ' %(s)s' * 8, '%(s)s'),
  >     ('m', 'opt2', '', 'middle width' + ' %(m)s' * 8, '%(m)s'),
  >     ('l', 'opt3', '', 'long width'   + ' %(l)s' * 8, '%(l)s')],
  >     '')
  > def showoptlist(ui, repo, *pats, **opts):
  >     '''dummy command to show option descriptions'''
  >     return 0
  > """ % globals())
  > f.close()
  > EOF
  $ S=`cat s`
  $ M=`cat m`
  $ L=`cat l`

alignment of option descriptions in help

  $ cat <<EOF > .hg/hgrc
  > [extensions]
  > ja_ext = `pwd`/showoptlist.py
  > EOF

check alignment of option descriptions in help

  $ hg help showoptlist
  hg showoptlist
  
  dummy command to show option descriptions
  
  options:
  
   -s --opt1 \xe7\x9f\xad\xe5\x90\x8d         short width \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d (esc)
   -m --opt2 MIDDLE_      middle width MIDDLE_ MIDDLE_ MIDDLE_ MIDDLE_ MIDDLE_
                          MIDDLE_ MIDDLE_ MIDDLE_
   -l --opt3 \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d long width \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
                          \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
                          \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
  
  (some details hidden, use --verbose to show complete help)


  $ rm -f s; touch s
  $ rm -f m; touch m
  $ rm -f l; touch l

add files

  $ cp s $S
  $ hg add $S
  $ cp m $M
  $ hg add $M
  $ cp l $L
  $ hg add $L

commit(1)

  $ echo 'first line(1)' >> s; cp s $S
  $ echo 'first line(2)' >> m; cp m $M
  $ echo 'first line(3)' >> l; cp l $L
  $ hg commit -m 'first commit' -u $S

commit(2)

  $ echo 'second line(1)' >> s; cp s $S
  $ echo 'second line(2)' >> m; cp m $M
  $ echo 'second line(3)' >> l; cp l $L
  $ hg commit -m 'second commit' -u $M

commit(3)

  $ echo 'third line(1)' >> s; cp s $S
  $ echo 'third line(2)' >> m; cp m $M
  $ echo 'third line(3)' >> l; cp l $L
  $ hg commit -m 'third commit' -u $L

check alignment of user names in annotate

  $ hg annotate -u $M
          \xe7\x9f\xad\xe5\x90\x8d: first line(2) (esc)
       MIDDLE_: second line(2)
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d: third line(2) (esc)

check alignment of filenames in diffstat

  $ hg diff -c tip --stat
   MIDDLE_      |  1 +
   \xe7\x9f\xad\xe5\x90\x8d         |  1 + (esc)
   \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d |  1 + (esc)
   3 files changed, 3 insertions(+), 0 deletions(-)

add branches/tags

  $ hg branch $S
  marked working directory as branch \xe7\x9f\xad\xe5\x90\x8d (esc)
  (branches are permanent and global, did you want a bookmark?)
  $ hg tag $S
  $ hg book -f $S
  $ hg branch $M
  marked working directory as branch MIDDLE_
  $ hg tag $M
  $ hg book -f $M
  $ hg branch $L
  marked working directory as branch \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
  $ hg tag $L
  $ hg book -f $L

check alignment of branches

  $ hg branches
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d                   5:d745ff46155b (esc)
  MIDDLE_                        4:9259be597f19 (inactive)
  \xe7\x9f\xad\xe5\x90\x8d                           3:b06c5b6def9e (inactive) (esc)
  default                        2:64a70663cee8 (inactive)

check alignment of tags

  $ hg tags
  tip                                5:d745ff46155b
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d                       4:9259be597f19 (esc)
  MIDDLE_                            3:b06c5b6def9e
  \xe7\x9f\xad\xe5\x90\x8d                               2:64a70663cee8 (esc)

check alignment of bookmarks

  $ hg book
     MIDDLE_                   5:d745ff46155b
     \xe7\x9f\xad\xe5\x90\x8d                      4:9259be597f19 (esc)
   * \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d              5:d745ff46155b (esc)